lp640/murcie max width ..... urgent
lp640/murcie max width ..... urgent
Author
Discussion

F308 MAN

Original Poster:

1,029 posts

267 months

Friday 22nd February 2008
quotequote all
assuming the mirrors fold in, i need (urgently) to calculate the minimum width required for car park entrance/exit.
many thanks in anticipation.
kindest regards,
david

blot

1,308 posts

267 months

Friday 22nd February 2008
quotequote all
Don't know murci but g is 7 foot mirror to mirror & murci is obviously larger than that

dh1

103 posts

230 months

Friday 22nd February 2008
quotequote all
2058mm or 81inches

dh1

103 posts

230 months

Friday 22nd February 2008
quotequote all
sorry...thats the width of the car..so probably another meter to be save?

F308 MAN

Original Poster:

1,029 posts

267 months

Friday 22nd February 2008
quotequote all
many, many thanks.
kind regards,
david

edit:
dh1 said:
sorry...thats the width of the car..so probably another meter to be save?
actually, now you come to mention it, and knowing the capabilities of the drivers in question ... perhaps i should allow an extra three metres !?!?!

Edited by F308 MAN on Friday 22 February 14:14

LamboFool

310 posts

236 months

Friday 22nd February 2008
quotequote all
F308 MAN said:
many, many thanks.
kind regards,
david

edit:
dh1 said:
sorry...thats the width of the car..so probably another meter to be save?
actually, now you come to mention it, and knowing the capabilities of the drivers in question ... perhaps i should allow an extra three metres !?!?!

Edited by F308 MAN on Friday 22 February 14:14
I have about 1-2cm space either side and it is suffient, The car park I use has quite a big entrance so def check it first and leave the wing mirrors out as if they get through the rest of the car will I think they stick out an extra 1cm or so from the widest part of the car.

ianqv

1,278 posts

243 months

Friday 22nd February 2008
quotequote all

Lambofool, Is that a typo? you only have 1 < 2cm either side!!!
And I thought mine was a tight fit with 20cm either side.

Go on... tell us you back it in as well!!! bow

Regards

Ian

XXVIII

2,800 posts

244 months

Friday 22nd February 2008
quotequote all
According to figures published by Automobili Lamborghini when the Murciélago was launched...


length: 4,580mm

height: 1,135mm

WIDTH: 2,045mm


so the LP640 is a bit wider still... isn't it?


LamboFool

310 posts

236 months

Friday 22nd February 2008
quotequote all
ianqv said:
Lambofool, Is that a typo? you only have 1 < 2cm either side!!!
And I thought mine was a tight fit with 20cm either side.

Go on... tell us you back it in as well!!! bow

Regards

Ian
Lucky it is only the entrance barriers to the car park that have the width issue, my car park spot is alot more space friendlysmile

SimonSays

449 posts

305 months

Friday 22nd February 2008
quotequote all
I have to reverse about 30m on a section just about 2m wide... with a big wall on one side, and parked cars on the other side... Very tight...
If you reverse like balboni it's doable...

dh1

103 posts

230 months

Friday 22nd February 2008
quotequote all
the real killer for underground car parks is the front overhang ..1meter..although not as bad as the gt40....remember the top gear episode trying to get the supercars out of the paris underground car park

dh1

103 posts

230 months

Friday 22nd February 2008
quotequote all
and of course the lp640 has front lifting..so it makes it easier...see..im so bored waiting for mine the brochure is more thumbed than my first copy of Razzle at boarding school.