Thanks PH'er, I've not gone up in flames! (F355)
Thanks PH'er, I've not gone up in flames! (F355)
Author
Discussion

Jonty355

Original Poster:

4,423 posts

244 months

Tuesday 23rd March 2010
quotequote all
Just want it to be known if it hadn't have been for the mention on here about the F355 recall, my car would have eventually ended up in flames.

Mainly due to Chaz (Ferrarispider) checking out the fuel line on my car and pointing out that it required the recall. I booked it in with JCT600 in Leeds who have fitted the recall part, but have kept the car in due to the damage to the fuel line being so severe. eek

They've agreed to replace the fuel line now, and also Ferrari have agreed to pick up the bill for it too.

Only problem is I was hoping to be able to use it for a wedding this weekend, but it might not be ready! So might be a bit stuck if anyone has a spare bit of exotica they fancy lending me? biggrin

Though had it not been for seeing the mention on PH, I wouldn't have known since Ferrari didn't have my details on their database, so I never received a letter about the recall. But cheers to Chaz for checking out the car! I owe you a pint! beer

ferrari spider

1,107 posts

205 months

Tuesday 23rd March 2010
quotequote all
How about that brother biggrin

Jonty355

Original Poster:

4,423 posts

244 months

Tuesday 23rd March 2010
quotequote all
Still none the wiser on the exhaust system you pointed out. Not quite sure how to contact Mr Hill to find out what he did to it!

ferrari spider

1,107 posts

205 months

Tuesday 23rd March 2010
quotequote all
Yea its just that your car being a 95/96 it should have a "Y" piece top cat exhaust section similar to mine. With out taking the airboxes of and heat shield i cant tell what design it is. But as pointed out, you have certain bits in your engine bay that have been taken from other 355 models.
Have a look at the picture bellow and next time you can, compare it to your cars and let me know if its the same.


Cactussed

5,364 posts

244 months

Tuesday 23rd March 2010
quotequote all
Presume that's a custome made Y-pipe? Looks v nice.

Jonty355

Original Poster:

4,423 posts

244 months

Tuesday 23rd March 2010
quotequote all
Ok, will check it out. how many different 355 models were they? Could it be a challenge spec modification? Or is that just an aftermarket design?

Whats the advantages or disadvantages of it?



Edited by Jonty355 on Tuesday 23 March 16:50

Cactussed

5,364 posts

244 months

Tuesday 23rd March 2010
quotequote all
The different models are the 2.7 and 5.2, but I think they use the same Y-pipe. The challenge cars do away with it as they don't use a bypass valve. The design above has the advantage of doing away with the small secondary catalytic converters... And it looks pretty smile

Jonty355

Original Poster:

4,423 posts

244 months

Tuesday 23rd March 2010
quotequote all
Ah, cos that was Chaz found to be on mine. I'd never really compared it with other 355's, so I didn't know it was any different.

So doing away with that I'm taking it its a bit of a power advantage I'll get then?

ferrari spider

1,107 posts

205 months

Tuesday 23rd March 2010
quotequote all
Jonty355 said:
Ok, will check it out. how many different 355 models were they? Could it be a challenge spec modification? Or is that just an aftermarket design?

Whats the advantages or disadvantages of it?



Edited by Jonty355 on Tuesday 23 March 16:50
Jonty there were a few variants made to the 355 models. Mainly in the engine bay, i will try to list the ones i know about.
1/Some easy 94/95 models have two fuel filters, then they changed to the single.
2/The 94s had the large type power steering cap, then later changed to smaller type.
3/We all know about the 2.7s to the 5.2 ECU change in late 96.
4/ The injectors on the early 2.7s had a greater flow rate.
4/ Jonty you may also have noticed that your spider does not have the harmonic resonators that mine have (pic). This was only found in the 95s and upto the mid 96s on Euro cars only. Both mine and your car only have a years difference in age.
5/ There are also two different "Y" Piece to exhaust/cat sections depending on year.
6/ Some 355s have only one fuel pump, some models have two.
7/ One of the strangest things that i know about and cant find out why. Some 355s (all models) in the rear bumper have slots and some dont. One can get two identical models and one may have slots and one will not. Its also not country related.
And yours is not a challenge exhaust type. But like i said i really need to see it under the shields. You could well just have the very late factory version which is not a "Y" shape. I would like to see it better.
The pipe work in the picture is made by a Japanese company. Its expensive yes, but it eliminates the cats that the standard "Y" piece holds. thus allows better engine breathing in the same way straight pipes do. I really do need one my self wink






Edited by ferrari spider on Tuesday 23 March 18:17

cronk-flakes

3,480 posts

284 months

Tuesday 23rd March 2010
quotequote all
yikes That is one clean engine bay!

jonny finance

1,059 posts

237 months

Tuesday 23rd March 2010
quotequote all
ferrari spider said:
Jonty355 said:
Ok, will check it out. how many different 355 models were they? Could it be a challenge spec modification? Or is that just an aftermarket design?

Whats the advantages or disadvantages of it?



Edited by Jonty355 on Tuesday 23 March 16:50
Jonty there were a few variants made to the 355 models. Mainly in the engine bay, i will try to list the ones i know about.
1/Some easy 94/95 models have two fuel filters, then they changed to the single.
2/The 94s had the large type power steering cap, then later changed to smaller type.
3/We all know about the 2.7s to the 5.2 ECU change in late 96.
4/ The injectors on the early 2.7s had a greater flow rate.
4/ Jonty you may also have noticed that your spider does not have the harmonic resonators that mine have (pic). This was only found in the 95s and upto the mid 96s on Euro cars only. Both mine and your car only have a years difference in age.
5/ There are also two different "Y" Piece to exhaust/cat sections depending on year.
6/ Some 355s have only one fuel pump, some models have two.
7/ One of the strangest things that i know about and cant find out why. Some 355s (all models) in the rear bumper have slots and some dont. One can get two identical models and one may have slots and one will not. Its also not country related.
And yours is not a challenge exhaust type. But like i said i really need to see it under the shields. You could well just have the very late factory version which is not a "Y" shape. I would like to see it better.
The pipe work in the picture is made by a Japanese company. Its expensive yes, but it eliminates the cats that the standard "Y" piece holds. thus allows better engine breathing in the same way straight pipes do. I really do need one my self wink






Edited by ferrari spider on Tuesday 23 March 18:17
JESUS - I am still trying to fathem out the 328 spare wheel colour - Don't need anything else to think about!!

Jonty355

Original Poster:

4,423 posts

244 months

Wednesday 24th March 2010
quotequote all
Yeah I was aware of the different models as in the 2.7 and 5.2 motronic. I know mine is a 5.2 and its a late '96 spider.

Never seen a 355 with those harmonic resonators before! I'll have to pop my car down for you to have a look under the heat sheilds. Would like a look at that engine bay on yours too, that really does look immaculate!

Manetino

10 posts

171 months

Friday 12th October 2012
quotequote all
Does anyone have a diagram of where these sonic resonators derive their air from and if the airbox is the same as on other 2.7's