ECU Warning light on Gallardo
ECU Warning light on Gallardo
Author
Discussion

ChrisFitz

Original Poster:

751 posts

210 months

Tuesday 13th July 2010
quotequote all
I'm sure this has been done before but the search in PH is somewhat useless these days so can't perform one on just this forum page.

Basically, after getting caught in a heavy (well torrential) shower for the 1st time ever I'm now getting intermittant yellow warning lights on both banks.

So there's me thinking it's something to do with water creeping in somewhere. 1 week later and dried out in the garage and still it's there.

It did go out on two occassions on driving back from France. No apparent power loss. Oil and water temps fine. Oil pressure fine.

Am I right in thinking only option is to go to Lambo and get them read and then diagnosed and reset accordingly?

Car is out of warranty btw.

Cheers,
Chris

andrew.

10,365 posts

223 months

Tuesday 13th July 2010
quotequote all
disturbed crap magnetised to the exhaust sensors hopefully
worth getting it checked though

ChrisFitz

Original Poster:

751 posts

210 months

Tuesday 13th July 2010
quotequote all
andrew. said:
disturbed crap magnetised to the exhaust sensors hopefully
worth getting it checked though
disturbed crap! lol that is indeed itself very disturbing knowing its loitering around in my engine bay!

andrew.

10,365 posts

223 months

Tuesday 13th July 2010
quotequote all
ChrisFitz said:
andrew. said:
disturbed crap magnetised to the exhaust sensors hopefully
worth getting it checked though
disturbed crap! lol that is indeed itself very disturbing knowing its loitering around in my engine bay!
biggrin rusty exhaust particles upset mine

Peter101

1,594 posts

236 months

Tuesday 13th July 2010
quotequote all
I had a warning light so bought one of these code readers http://wap.ebay.co.uk/Pages/ViewItem.aspx?aid=3304...

It showed the fault was on a heat sensor, with the help of a friend we removed the sensor, cleaned it, replaced it then used the code reader to clear the code. The error light has as of yet not returned.

TimboL

142 posts

239 months

Tuesday 13th July 2010
quotequote all
andrew. said:
biggrin rusty exhaust particles upset mine
I also had rusty particles. Mine were up one of the tubes that sniffs the exhaust to detect misfires. AFAIR, Lamborghini London replaced the original mild steel tubes with stainless steel ones. However, the rusty particles only threw an OBDII check on one cylinder bank.

Then a few days ago I got simultaneous OBDII checks on both banks. I made Lamborghini Assist get off their lazy idle fat corporate arse and send a man with a code reader; partially in retribution for their shabby cheapskate unhelpful witless idiot performance when I'd had a tyre blow out in the back of beyond a few days prior to that, and mainly to make sure the car was OK to drive round to the workshop. In this case it was a P0506, 'idle air control system RPM lower than expected', and the problem turned out to be that a vacuum pipe had become detached somewhere in the bowels of the engine. Inevitably, though, the dashboard OBDII check indicators all went out within about 500 yards of my setting out to take the car round to the workshop.

If you have a code reader, or a man with a code reader, this turns out to be quite useful:
http://www.lamboweb.com/Repairs_Section/Gallardo_R...

On the rusty particles occasion, Lamborghini Assist sent a man from something called RAC de luxe, or RAC prestige, or something like that. The RAC man's lap-top software did not have Lambo decodes, but it did have Bentley ones which he was adamant would be close enough. The Bentley decodes interpreted the stored fault as a misfire in cylinder 11 which the RAC man was staunchly reluctant to accept was improbable on a Gallardo.

UH-Matt

2,173 posts

271 months

Tuesday 13th July 2010
quotequote all
Might invest in one of those readers.... Seems like a nice thing to have handy in the glovebox!

V10 BAT

1,718 posts

265 months

Wednesday 14th July 2010
quotequote all
Chris,i dont have a code reader yet,but if i can help any before
dealer visit feel free.

ChrisFitz

Original Poster:

751 posts

210 months

Wednesday 14th July 2010
quotequote all
V10 BAT said:
Chris,i dont have a code reader yet,but if i can help any before
dealer visit feel free.
Hi Dave,

Think for £40 or thereabouts I'll invest in one of those too.
At least then have a clue to the whereabouts of the issue.

Is yours still in bits or back together again?

V10 BAT

1,718 posts

265 months

Wednesday 14th July 2010
quotequote all
Nice,yep ready to wake up the neighbours. biggrin

ChrisFitz

Original Poster:

751 posts

210 months

Wednesday 14th July 2010
quotequote all
Peter101 said:
I had a warning light so bought one of these code readers http://wap.ebay.co.uk/Pages/ViewItem.aspx?aid=3304...

It showed the fault was on a heat sensor, with the help of a friend we removed the sensor, cleaned it, replaced it then used the code reader to clear the code. The error light has as of yet not returned.
Was this the exact one you bought, the Autel maxiscan GS500?

UH-Matt

2,173 posts

271 months

Wednesday 14th July 2010
quotequote all
If you do want the GS500 note a lot of the "auctions" for them are selling for more than the "buy it now" ones around £42 quid.

Peter101

1,594 posts

236 months

Wednesday 14th July 2010
quotequote all
ChrisFitz said:
Peter101 said:
I had a warning light so bought one of these code readers http://wap.ebay.co.uk/Pages/ViewItem.aspx?aid=3304...

It showed the fault was on a heat sensor, with the help of a friend we removed the sensor, cleaned it, replaced it then used the code reader to clear the code. The error light has as of yet not returned.
Was this the exact one you bought, the Autel maxiscan GS500?
The one I have is the Autel MaxScan Ms509

It even has a database of Lamborghini codes.

This one

http://cgi.ebay.co.uk/Autel-Maxiscan-MS509-Car-Dia...


Sorry the previous link of the GS500 is wrong and I didn't notice, although that one may work too, just not the one I ordered.

Edited by Peter101 on Wednesday 14th July 14:41

ChrisFitz

Original Poster:

751 posts

210 months

Wednesday 14th July 2010
quotequote all
Peter101 said:
ChrisFitz said:
Peter101 said:
I had a warning light so bought one of these code readers http://wap.ebay.co.uk/Pages/ViewItem.aspx?aid=3304...

It showed the fault was on a heat sensor, with the help of a friend we removed the sensor, cleaned it, replaced it then used the code reader to clear the code. The error light has as of yet not returned.
Was this the exact one you bought, the Autel maxiscan GS500?
The one I have is the Autel MaxScan Ms509

It even has a database of Lamborghini codes.

This one

http://cgi.ebay.co.uk/Autel-Maxiscan-MS509-Car-Dia...
many thanks Peter.....

ChrisFitz

Original Poster:

751 posts

210 months

Wednesday 14th July 2010
quotequote all
V10 BAT said:
Nice,yep ready to wake up the neighbours. biggrin
Dave, Will. Just ordered a code scanner/reader so you know where to come if you get a check engine light come on! :-)

V10 BAT

1,718 posts

265 months

Wednesday 14th July 2010
quotequote all
Hey thanks for that............................................
...............................hope i never have to call you biggrin
In the meantime could you.
1 get in your car.
2 turn on and off the ignition 3 times.
3 then lock the doors
4 turn on ignition.

Do you have ecu light still on ?
And no this is not a joke.

Caelum Blue

511 posts

229 months

Thursday 15th July 2010
quotequote all
ChrisFitz said:
V10 BAT said:
Nice,yep ready to wake up the neighbours. biggrin
Dave, Will. Just ordered a code scanner/reader so you know where to come if you get a check engine light come on! :-)
Cheers Chris

ChrisFitz

Original Poster:

751 posts

210 months

Thursday 15th July 2010
quotequote all
V10 BAT said:
Hey thanks for that............................................
...............................hope i never have to call you biggrin
In the meantime could you.
1 get in your car.
2 turn on and off the ignition 3 times.
3 then lock the doors
4 turn on ignition.

Do you have ecu light still on ?
And no this is not a joke.
ok, if my engine goes bang I'm straight round your house mate! lol laugh

Will give it a go and let you know then.....

Np Will.... Likewise hope none of other need to use it, but for £50 a sound investment I think.

ChrisFitz

Original Poster:

751 posts

210 months

Friday 16th July 2010
quotequote all
ok dumb question time...

where is the OBDII cable/socket to plug the reader into?

I thought it was by the fuse box so have looked in here and can't seem to find anything that fits.

help anyone!

Peter101

1,594 posts

236 months

Friday 16th July 2010
quotequote all
ChrisFitz said:
ok dumb question time...

where is the OBDII cable/socket to plug the reader into?

I thought it was by the fuse box so have looked in here and can't seem to find anything that fits.

help anyone!
It's just below the steering wheel, if you stick your head under you will see it.