torque tool

[anonymous-user]

I am in the middle of changing the crank pulle, but need to torque a bolt to 90lbs. What is the cheapest tool i could use for this?

thanks

[The Black Flash]

Cheap torque wrench is about your only option there I'd have thought.
Or just do it up "FT".

[Mr2Mike]

1 foot breaker bar and a 90 lb weight?

[Honda Rush]

Tool Hire Shop is your friend

[Nick3point2]

The Black Flash said:

Cheap torque wrench is about your only option there I'd have thought.
Or just do it up "FT".

90 lb ft is bugger all, I'd be very carefully about doing it up FT!!

And OP, did you really need to ask what the correct tool was to do up a bolt to a specific torque?

[anonymous-user]

Nick3point2 said:

90 lb ft is bugger all, I'd be very carefully about doing it up FT!!

And OP, did you really need to ask what the correct tool was to do up a bolt to a specific torque?

ermm quite, I asked a question on a car forum about a tool, and one turned up.

As per the first post just needed a tool for one off job, sorted now thanks..