Changing the clutch on a Mondeo ST24
Discussion
Hi all,
A catastrophic failure of the pressure plate has seen me being towed home today, now I need to change the clutch.
What is it like on a Mondeo V6 (2000)? The AA man wasn't optimistic! It won't be my first clutch but I like to know what I'm heading into.
Also, what are the cheap clutches available on eBay like? I've only done limited research so far but I need to keep this cheap as the car itself isn't worth much!
Thanks in advance!
A catastrophic failure of the pressure plate has seen me being towed home today, now I need to change the clutch.
What is it like on a Mondeo V6 (2000)? The AA man wasn't optimistic! It won't be my first clutch but I like to know what I'm heading into.
Also, what are the cheap clutches available on eBay like? I've only done limited research so far but I need to keep this cheap as the car itself isn't worth much!
Thanks in advance!
They are pretty horrific to do. Captive nuts that the subframe bolts to usually sheer and spin too.
I used to have an ST200, and I work for an automotive company who actually specialise difficult tasks, like building cars, engine conversions etc.
I would have sent it to an indy if it had gone while I had it! Nice car though.
I used to have an ST200, and I work for an automotive company who actually specialise difficult tasks, like building cars, engine conversions etc.
I would have sent it to an indy if it had gone while I had it! Nice car though.
Strangely, someone on the Yorkshire forum is trying to do a Mondeo clutch change too. I would try the forum at www.talkford.com (was fordmondeo.org). I gather there are tricks that can be done which get around some of the access problems.
Zad said:
Strangely, someone on the Yorkshire forum is trying to do a Mondeo clutch change too. I would try the forum at www.talkford.com (was fordmondeo.org). I gather there are tricks that can be done which get around some of the access problems.
That is probably me, I posted in there to try to find a place to do it.I'll have a good look around talkford, thanks.
A couple of years ago there was an item in Car Mechanics magazine about a place where you could rent repair space over in Manchester, with full access to tools and advice. I think this is it http://www.hotfrog.co.uk/Companies/DIY-Garage-net
But their web site says opening Autumn 2012, so I dunno! http://www.diy-garage.net
But their web site says opening Autumn 2012, so I dunno! http://www.diy-garage.net
Gassing Station | Engines & Drivetrain | Top of Page | What's New | My Stuff


