Peugeot 207 Engine oil leak
Peugeot 207 Engine oil leak
Author
Discussion

Dvhendo

Original Poster:

6 posts

78 months

Monday 13th April 2020
quotequote all
Just wanted some advice really, I had a mechanic look at my car, but he said they all leak bits of oil, he said it wasn’t anything major. And it was just coming from the seals, I’ve got some pictures of the oil, to me it seems like quite a bit.

It’s leaving marks when ever it’s parked but it has no other issues and it isn’t probably as much oil as it looks.

You can see the oil when you lift the hood up.

It’s down near the belt and all over the front looking down.

Anyone familiar with this or know what it may be? He said the gasket was ok.

He fitted a new clutch and that’s fine now. It’s just this puzzle with the bits of oil but the oil is still full.

DuraAce

4,272 posts

190 months

Monday 13th April 2020
quotequote all
A small amount of oil goes a long way when leaking, hence you need to lose a lot before it's low on the dipstick.

It could (quite obviously I hope?) be leaking from anywhere.... Crank seal, cam seal, sump, headgasket, cam cover etc etc. Its not diagnosable online with no photos!

Jazoli

9,674 posts

280 months

Monday 13th April 2020
quotequote all
Have a look at the front left corner of the engine block, I'll bet its leaking oil from the head gasket there, they are st and all do it eventually.

Dvhendo

Original Poster:

6 posts

78 months

Monday 13th April 2020
quotequote all
Gasket is ok. Mechanic said it’s the seals, but I’m not too sure.


Dvhendo

Original Poster:

6 posts

78 months

Monday 13th April 2020
quotequote all

Dvhendo

Original Poster:

6 posts

78 months

Monday 13th April 2020
quotequote all

Dvhendo

Original Poster:

6 posts

78 months

Monday 13th April 2020
quotequote all

Dvhendo

Original Poster:

6 posts

78 months

Monday 13th April 2020
quotequote all

Jazoli

9,674 posts

280 months

Monday 13th April 2020
quotequote all
You need to clean all the old filthy oil off everything then you should be able to find where the oil is coming from, dirty filthy job though.

paintman

7,860 posts

220 months

Monday 13th April 2020
quotequote all
Jazoli said:
You need to clean all the old filthy oil off everything then you should be able to find where the oil is coming from, dirty filthy job though.
+1