Push rods

[deetes]

Can anyone point me in the right direction for pushrods to use with Group A adjustable rockers and hydraulic lifters?

Not decided on the spec of the cam yet, but possibly V8 Development's Stealth cam.

[Boosted LS1]

I'd try V8D first and then Real Steal. You could ask over on the V8 Owners forum.

[350Matt]

I'd use the cro-moly pushrods from real steel, they're £87 and you have to enlarge the holes in the head slightly but I've used them before with good results.

http://www.realsteel.co.uk/

At high revs / high lifts the std rods flex like mad and break other bits of the valve train.

Matt

[deetes]

Boosted LS1 said:

I'd try V8D first and then Real Steal. You could ask over on the V8 Owners forum.

I've put the same question on the V8 forum.

(I'd use the cro-moly pushrods from real steel, they're £87 and you have to enlarge the holes in the head slightly but I've used them before with good results.)

Do you get these for Group A rockers? The reason I ask is that the push rods for these rockers have a ball at one end and a cup at the other.

[350Matt]

Dunno

Potentially you might be able to get some chevy parts to fit as you're spolit for choice with that engine

Matt