LS7 Build Manual

[toohuge]

Gents,

Does anybody know or have access to a LS7 build manual? I am trying to spec an engine from off the shelf parts and I am now down to nitty gritty bits like timing chain dampers, gaskets and seals etc

Any help would be greatly appreciated

Chris

[bertelli_1]

Try posting in the hsv/monaro forum, someone on there may have it.

[toohuge]

thanks

[Boosted LS1]

If it's not a true ls7 then you don't need an ls7 build manual. A lot of the stuff is interchangeable from engine to engine as are torque values etc.

You will need 4.125" head gaskets and late front end parts if you are using a late block. Rest of the gaskets and bolts are common. You'll probably be using stud kits and they have their own torque values.

[toohuge]

Thanks Boosted.

I was just really looking for things like seals etc

[Boosted LS1]

toohuge said:

Thanks Boosted.

I was just really looking for things like seals etc

They're interchangeable, I stock those but you'll get them cheaper from the US with the rest of your parts.

[ringram]

try ls1tech.com and search for part numbers
Usually there is a load in the stickies

For example http://www.ls1tech.com/forums/generation-iv-intern...

[tinker-27]

tyr nook&tranny in the states for bits they are very good service and can be trusted,i have a few contacts if you get stuck you can ring us on 01217530415 cheers craig

[toohuge]

tinker-27 said:

tyr nook&tranny in the states for bits they are very good service and can be trusted,i have a few contacts if you get stuck you can ring us on 01217530415 cheers craig

Thanks Craig