Citroen ZX engine swap 1.9d to 1.9TD
Citroen ZX engine swap 1.9d to 1.9TD
Author
Discussion

tommytucker

Original Poster:

21 posts

194 months

Monday 8th February 2010
quotequote all
Hi all I recently bought a citroen zx TD, I intend to put this engine into my zx 1.9 D estate, how much different are the looms? Do i need to know anything in particular about these engines? As the engine I am removing is not a turbo.

cheers Tom

tommytucker

Original Poster:

21 posts

194 months

Monday 8th February 2010
quotequote all
After looking into a couple of things it would seem that there is a difference, I now need to know what they are........
There is a wire that is extra and a relay

The single wire is on the main loom that comes from the wing
The relay is between the wing and engine that appear to be most obvious.

I would appreciate any help on this thanks

Simon Says

19,349 posts

245 months

Tuesday 9th February 2010
quotequote all
What pump do you have fitted on the non TD and how many electro solenoids on the TD engine,should be 2 wink have they both got Bosch pumps? remember the Turbo set-up is non electrical based smile i am a XUD old school fan boy so let me see if i can help laugh



Edited by Simon Says on Tuesday 9th February 10:55

tommytucker

Original Poster:

21 posts

194 months

Tuesday 9th February 2010
quotequote all
OK just had a look, the TD has the Bosch and the non turbo is a Lucas.

The TD has 4 solenoids and the non Turbo has only 3!?! what can i do to make them make.

Will I needs to swap pumps or change the loom

Simon Says

19,349 posts

245 months

Tuesday 9th February 2010
quotequote all
Should be only 2 solenoids on the pump with a single wire on each the multi plug that is just under the pump should be 3 terminals wide inside,also a plug near the fuel filter don't worry about that is for a crank position sensor that is used on Citroen/Peugeot only diagnostic equipment and does not affect what you are after,what year is the TD motor? the later cars have an immobilizer circuit built into the pump that's usually the Lucas pumped units 95on wink

tommytucker

Original Poster:

21 posts

194 months

Tuesday 9th February 2010
quotequote all
the TD doesn't have an immobiliser on it where as the non turbo does. the non turbo has two connectors and the turbo has 1. does that mean anything to you?

tommytucker

Original Poster:

21 posts

194 months

Tuesday 9th February 2010
quotequote all
the TD engine is 1995 (N) and the non turbo is 1996/1997(R)

tommytucker

Original Poster:

21 posts

194 months

Tuesday 9th February 2010
quotequote all
Would you happen to know if the looms are the same. If i plugged it in what would happen?

Simon Says

19,349 posts

245 months

Tuesday 9th February 2010
quotequote all
If you want to retain your non/t loom you need to find the live + feed in your old loom where it plugs into your Lucas/1.9D pump when the ignition is switched on this as to go to the stop solenoid on the TD Bosch pump(the one above the injector pipe outlets facing up)on the right hand side,without this connection you will never get your TD lump to fire wink you cannot retain the immobilizer function of your car on the earlier TD lump and cant use the Lucas pump either because the TD pump is calibrated different thumbup you will sought this no problem biggrin can you post up some pics of the connectors you have as most of this info you need is still pretty fresh in my nut wink



Edited by Simon Says on Tuesday 9th February 20:02

tommytucker

Original Poster:

21 posts

194 months

Tuesday 9th February 2010
quotequote all
What pics would you like to see bud?

Simon Says

19,349 posts

245 months

Wednesday 10th February 2010
quotequote all
The connectors/multiplugs near the pump both your Lucas & Bosch pumps wink

tommytucker

Original Poster:

21 posts

194 months

Wednesday 10th February 2010
quotequote all


Thats the 1.9d non turbo

tommytucker

Original Poster:

21 posts

194 months

Wednesday 10th February 2010
quotequote all



This is the 1.9td

HereBeMonsters

14,180 posts

206 months

Wednesday 10th February 2010
quotequote all
I'm changing my 1.8 non turbo to a 1.9 Turbo. Oh what fun.

tommytucker

Original Poster:

21 posts

194 months

Wednesday 10th February 2010
quotequote all


from the non turbo, the turbo has an extra relay you got any ideas...... or does it no matter?

rb5230

11,657 posts

196 months

Wednesday 10th February 2010
quotequote all
you could just buy a zx td estate for about £500 with 7 months m.o.t, mine in fact. laugh

tommytucker

Original Poster:

21 posts

194 months

Wednesday 10th February 2010
quotequote all
Thanks but no thanks.

Simon Says

19,349 posts

245 months

Wednesday 10th February 2010
quotequote all
Tommy,they are both Bosch pumps in your pics scratchchin(no Lucas stuff there) plug the blue connector into the only black connector on your new engines pump and ignore that black lower one of the two,the purple relays i am not sure about be it 3 or 4,the power to the stop solenoid on the pump comes from that bigger cold start relay thats the one on the outside of your fusebox wink if i was standing in front of this car it would not take so long laugh

Edited by Simon Says on Wednesday 10th February 22:19

tommytucker

Original Poster:

21 posts

194 months

Wednesday 10th February 2010
quotequote all
Ahh wicked thanks alot bud....... just one thing, you said there isn't any lucas stuff there jus there is.... the cold start box on the non turbo has lucas wrote on it.

Simon Says

19,349 posts

245 months

Thursday 11th February 2010
quotequote all
tommytucker said:
Ahh wicked thanks alot bud....... just one thing, you said there isn't any lucas stuff there jus there is.... the cold start box on the non turbo has lucas wrote on it.
I was referring to the pumps hehe