R1 bike throttle bodies to peugeot 2.0 16v

[bigbazk]

Im looking at fitting R1 throttle bodies to my 307 xsi and was wondering if any body has installed something along the same lines.
Im asking as i need to know if i can run these of my standard ecu with it being remapped or do i need a stand alone ecu.
If anybody has done such a project photos and as much info as possible would be a great help cheers.

[rev-erend]

One of the first questions must be ..

1) Does the bike in question have a similar air flow requirement .. ie same max bhp.

The R1 has approx 160~180 bhp depending on year
some are carbs, some injected with ecu controller.

Pottential issues:
You would need to cast a custom manifold .. not easy.
Need to make air box / filters
What about brake servo - bikes dont have one. Each manifold would need to be tapped - linking all 4 to a connector block.
Cost of bespoke stuff is high compared to off the shelf stuff .. unless to work in a machine shop.


Custom set-up .. worth a read:
http://www.emeraldm3d.com/em_projects.html

[rev-erend]

Just done a search and others have do it on 4 pot motors :

http://www.turbosport.co.uk/showthread.php?110807-...

They think GSXR750 ones are good for several reasons:

http://www.migweb.co.uk/forums/engines-transmissio...

http://www.seatcupra.net/forums/showthread.php?t=8...

Jenvey :

http://www.jenvey.co.uk/

[Busa_Rush]

I have a set GSXR 750 throttle bodies which I've removed the secondary throttles from and two sets of injectors, GSXR750 and a set of Hayabusa injectors which are good for about 220ish bhp. PM me if you're interested