Geometry setup monaro vxr

[john93t]

Got my hands on a pedders suspension kit (low) and was wondering if the cv8 settings in the FAQ were the same for the vxr? I am happy enough to fit it myself but can't find anything on the geometry settings after it has been lowered. I know monkfish use there own settings but can't justify/have enough time to drive the 160 miles to have it fitted and set up.

I didn't get the kit directly from themselves so it would be cheeky to ask. Although I was very happy with the service I had done 2 weeks ago. top guys! Been a pleasure to drive without the bloody exhaust rattling.

[Pete G H]

I changed out my springs & shockers for Coil Overs. I had the full geometry alignment done, but I don't recall what Holden car I used. The company I used didn't have the Monaro VXR set up details.

[jameshsv]

Dont demon tweaks do alignmant

[john93t]

Ok, I found this in an old thread, so can anyone confirm if this is right?

Camber: -12min +- 30min
Castor: +7deg 45min +- 1Deg 15min
Total Tow: +10 min +-10min

Front N/S: +5min +-5 min
Front O/S: +5min +-5 min
Rear N/S: +5min +-5 min
Rear O/S: +5min +-5 min

Rear Tow: -0.5 deg

[Tattooboy]

I'm sure if you phoned MF, they'll be happy to help you out.

Failing that, pretty sure in doors I have my Geo set up sheets from when I had lowering springs fitted to my VXR on superlow and prob when I had the SC coil overs fitted, i'll check tonight and let you know if the above looks right.

Can always bring them to work, scan and e-mail to you

[ARAF]

There's no harm in asking, but don't be offended if they say "No."

[mikeyb1987]

john93t said:

Got my hands on a pedders suspension kit (low) and was wondering if the cv8 settings in the FAQ were the same for the vxr? I am happy enough to fit it myself but can't find anything on the geometry settings after it has been lowered. I know monkfish use there own settings but can't justify/have enough time to drive the 160 miles to have it fitted and set up.

I didn't get the kit directly from themselves so it would be cheeky to ask. Although I was very happy with the service I had done 2 weeks ago. top guys! Been a pleasure to drive without the bloody exhaust rattling.

I have the same kit as you, and I recently had them aligned. I'll see if I can dig out the sheet.

Edit: just saw Ian's post above. If Ian can't find his sheet, I'll have a look for mine.

[john93t]

If either of you guys would email me yours that would be much appreciated thanks

[Tattooboy]

Hi John,

Got both my settings for when I just had the Pedders lowering springs fitted and the new settings for the Super Car set up

Have taken pics on my phone, pm me your mobile and ill send them through

[bobchevy]

Hope this helps ?
Geometry figures after Road response pack and quick rack fitted, although they should not make a difference to any settings ( I think )

[bobchevy]

Sorry John scanned it upside down .....just stand on your head to view or turn the monitor over.

[Tattooboy]

bobchevy said:

Hope this helps ?
Geometry figures after Road response pack and quick rack fitted, although they should not make a difference to any settings ( I think )

Near enough the same settings as my super car set up, I've got a touch more camber front and rear

[bobchevy]

[john93t]

Cheers for the replies guys. All will come in handy for when I get around to doing it.

Got a 4 post lift available, so fitting should be easy and warmer than doing it on the drive don't do cold me