Check Engine light
Author
Discussion

NeoGrotesk

Original Poster:

58 posts

188 months

Saturday 2nd March 2013
quotequote all
Hi guys,

Just bought a Monaro cv8 (55 plate) and on my way home the check engine light came on, so I pulled off the motorway and contacted the dealer. He thought it was probably because it had sat for a while before being serviced, and hadn't had a run for a while. Their garage was closing before I could get back there, and I was close to home (15 mins) so decided to carry on there (slowly).

When I started it up again the check engine light didn't come back on and it seems to be running fine now (as far as I can tell). Haven't seen the light again since I stopped.

Can't find anyone local (Burton Latimer, Northants) with a code reader that's open at the moment, so I'll keep an eye on it and drop it into a local mechanic early next week to read the codes.

Any other advice?

Thanks,
Duncan

007 VXR

64,187 posts

218 months

Saturday 2nd March 2013
quotequote all
most likly nothing to worry aboutsmile

adaptive

842 posts

221 months

Saturday 2nd March 2013
quotequote all
It could be any number of things, from dodgy ABS sensor, a crack in a wire etc. I would just take it easy and get the code read as soon as you can

NeoGrotesk

Original Poster:

58 posts

188 months

Saturday 2nd March 2013
quotequote all
Thanks guys.

rolleyes Typical, first 'proper' car, and I have to take it easy! wink

007 VXR

64,187 posts

218 months

Saturday 2nd March 2013
quotequote all
They can do this just by turning engine off then back on again .. normally just turn off then wait 2/3 min
and it will reset.
Just keep an eye on it. and get codes read if you can.

build294

503 posts

215 months

Saturday 2nd March 2013
quotequote all
Had this today. Fitted a new rad cap and a fuel cap in the last couple of days. Before this every thing was good. How strange, humm!

NeoGrotesk

Original Poster:

58 posts

188 months

Saturday 2nd March 2013
quotequote all
Went for a drive this afternoon to a friend in Leicester and it was fine. But then it came on again as I got home this evening. frown I pulled into a nearby Tesco (bought some wine!), and it wasn't on when I started up again.

Got a friend in a local garage who'll read the codes probably on Monday - I'll report back then.

V88Dicky

7,373 posts

214 months

Saturday 2nd March 2013
quotequote all
Oxygen sensor on the way out? Cheap and easy fix if it is.

NeoGrotesk

Original Poster:

58 posts

188 months

Saturday 2nd March 2013
quotequote all
V88Dicky said:
Oxygen sensor on the way out? Cheap and easy fix if it is.
Seems to be a popular theory, is this what I would need?
http://www.amazon.co.uk/Oxygen-Sensor-Holden-UNIVE...

(Obviously I'll get the codes read before buying anything!)

The warranty I got when I bought the car is provided by an external company (Customer Protect Gold), but the dealer said this will take about a week to process so they cover me until then. Unfortunately the dealer is about an 1.5 hours away, so if it is a cheap fix I'd probably just get it sorted myself.

Thanks for all the advice, it really is appreciated!

V88Dicky

7,373 posts

214 months

Saturday 2nd March 2013
quotequote all
NeoGrotesk said:
V88Dicky said:
Oxygen sensor on the way out? Cheap and easy fix if it is.
Seems to be a popular theory, is this what I would need?
http://www.amazon.co.uk/Oxygen-Sensor-Holden-UNIVE...

(Obviously I'll get the codes read before buying anything!)

The warranty I got when I bought the car is provided by an external company (Customer Protect Gold), but the dealer said this will take about a week to process so they cover me until then. Unfortunately the dealer is about an 1.5 hours away, so if it is a cheap fix I'd probably just get it sorted myself.

Thanks for all the advice, it really is appreciated!
Looks to be the correct one, but always worth double-checking.

Unplug and unscrew the defective one, 22mm spanner iirc, and fitting is the reverse, simples!

Essexhsv

792 posts

229 months

Sunday 3rd March 2013
quotequote all
Neo, right if the check check isn't con while your drive the ecu is happy so drive as mad as you like.
Like someone else said it could be a O2 sensor. Yes maybe. Because the car may have been started loads of time when cold before being sold.
You just need to drive it mad for a bit and take it up to about 5000 rpm or more at full throttle a few times this should burn off any crap off the senso that causing it to register a fault like it did on mine once.
Mine did this when it wasn't used for a couple off months while I was waiting for a part.
So I gave it a blast and he light hasn't came on again in almost 5 years
But the needs to be read first.

ringram

14,702 posts

279 months

Sunday 3rd March 2013
quotequote all
Generally a check light with no apparent power loss will be emissions related.
You shouldn't panic and just get it scanned in a leisurely manner. If its a dodgy rear sensor you could just disable the DTC.

Ive got a light in the fiesta for the o2 heater circuit. One day Ill probably change it, but it doesnt prevent it running in the meantime, seems exactly the same as normal.

Nobody cares about the rear O2... Pre cat O2 needs to work though. Well it doesn't actually need to, but its better if it does.

If it goes into limp more though, you will have more serious issues with a key engine sensor.
Crank/Cam/MAF/Throttle etc.

So anyway, after that extended waffle the summary is you should scan it to see what the cause is, but if it hasnt affected drive-ability then there is no need to bust a gut doing so.


nosubstitute

750 posts

213 months

Sunday 3rd March 2013
quotequote all
I know Ringram is not allowed to advertise so I shall do if for him.

Get an Efilive V.2 Flashscan and then you can log your own drives and really understand how your engine is working. I've learned loads through logging all my drives. It is easy to see if the 02s are being 'naughty' and triggered an erroneous code. My short term and long term fuel trims are very close to 0% so when I get the odd 'check engine' warning light relating to emissions after a long period of inactivity for example I am confident that I can reset with no issues.

I think anyone with a Monaro/VXR8 should get a Flashscan….what reason is there not to?

ringram

14,702 posts

279 months

Sunday 3rd March 2013
quotequote all
Some would even suggest anyone with a supported GM engine should get one smile

But yes, its amazing how much you will learn. Im still learning every day.

Sorted out a guys C5 today.

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

Learnt that in the C5 sometimes you have to flash the same tune 2x for it to take reset all connected systems and that the dash being dead isnt always a BCM issue!

Also that C5's have a much larger boot than an 05+ monaro!

NeoGrotesk

Original Poster:

58 posts

188 months

Sunday 3rd March 2013
quotequote all
Thanks for the input guys, definitely put my mind a ease a bit! I'll get the codes read this week.

nosubstitute said:
I think anyone with a Monaro/VXR8 should get a Flashscan….what reason is there not to?
Looks very useful (I could do with learning more!), how much roughly does it cost?

nosubstitute

750 posts

213 months

Sunday 3rd March 2013
quotequote all
NeoGrotesk said:
Thanks for the input guys, definitely put my mind a ease a bit! I'll get the codes read this week.

nosubstitute said:
I think anyone with a Monaro/VXR8 should get a Flashscan….what reason is there not to?
Looks very useful (I could do with learning more!), how much roughly does it cost?
http://www.efilive.eu/

NeoGrotesk

Original Poster:

58 posts

188 months

Sunday 3rd March 2013
quotequote all
nosubstitute said:
Thanks smile

NeoGrotesk

Original Poster:

58 posts

188 months

Tuesday 5th March 2013
quotequote all
Just to update, took the Monaro to a mate of mine at a local garage today. Unfortunately, his software scanner wouldn't work specifically with a Monaro (it wasn't on his list of Vauxhalls or something), but there were no EOBD codes found.

His advice was that it was probably fine and I should stop worrying! smile

I don't know if the EOBD would have registered a code if the o2 sensor was playing up?

The car pops and burbles a lot on overrun (basically, every time if lift off the throttle!) which sounds great! But I'm not sure if it should be doing it this much?

Maybe I should just stop worrying! biggrin

the_ferret82

25,627 posts

215 months

Tuesday 5th March 2013
quotequote all
NeoGrotesk said:
Just to update, took the Monaro to a mate of mine at a local garage today. Unfortunately, his software scanner wouldn't work specifically with a Monaro (it wasn't on his list of Vauxhalls or something), but there were no EOBD codes found.

His advice was that it was probably fine and I should stop worrying! smile

I don't know if the EOBD would have registered a code if the o2 sensor was playing up?

The car pops and burbles a lot on overrun (basically, every time if lift off the throttle!) which sounds great! But I'm not sure if it should be doing it this much?

Maybe I should just stop worrying! biggrin
your car has been mapped to fit the exhaust, so yes it does pop a burble when lifing of the peddle cloud9

NeoGrotesk

Original Poster:

58 posts

188 months

Tuesday 5th March 2013
quotequote all
the_ferret82 said:
your car has been mapped to fit the exhaust, so yes it does pop a burble when lifing of the peddle cloud9
thumbup

Now what do I do about the £90 worth of fuel that somehow disappeared since Saturday!? yikes My commute just got expensive...