Line locker
Author
Discussion

Lowlife ccc

Original Poster:

47 posts

158 months

Sunday 15th September 2013
quotequote all
Hi my first post so be patient with me has anyone had any experiences of fitting line lockers to a cv8 ?

Magic919

14,595 posts

232 months

Sunday 15th September 2013
quotequote all
GSD has. I'm sure he'll be along. Gareth could help too.

Lowlife ccc

Original Poster:

47 posts

158 months

Sunday 15th September 2013
quotequote all
Thanks

gsd2000

11,515 posts

214 months

Sunday 15th September 2013
quotequote all
Yep straight forward to fit, bleeding can be a pain.

I went for an SJM linelock as it came with pre bent pipes so was easy to fit.

I bought it from "SpeedInc" in the states but you can buy it direct from SJM

Lowlife ccc

Original Poster:

47 posts

158 months

Sunday 15th September 2013
quotequote all
Did you fit it your self or can u recommend someone that can and can u give me an idea on prices for fitting and the locker kit

Behold81

2,931 posts

200 months

Sunday 15th September 2013
quotequote all
I bought the same kit. They sent the wrong year to me. But it was only on pipe needing a bend. Easy to fit and bleed. I didn't empty the MC. Releasing old pipes took a little work. And wiring takes a little while to do neat. But not hard.

Lowlife ccc

Original Poster:

47 posts

158 months

Sunday 15th September 2013
quotequote all
Have u any pics of the switch installed

preciousmetal

3,373 posts

207 months

Sunday 15th September 2013
quotequote all
Welcome JH, haven't got a clue what you are on about !!

Behold81

2,931 posts

200 months

Sunday 15th September 2013
quotequote all
Mine is temp at the moment. It comes as a momentary switch and a master. I'm going to use a missile switch only. That way I don't keep my finger in it.

Behold81

2,931 posts

200 months

Sunday 15th September 2013
quotequote all
Mine is temp at the moment. It comes as a momentary switch and a master. I'm going to use a missile switch only. That way I don't keep my finger in it.

rix

2,966 posts

221 months

Sunday 15th September 2013
quotequote all
Out of interest how are these things installed?

Behold81

2,931 posts

200 months

Sunday 15th September 2013
quotequote all
Its a solinoid that sits between the master cylinder and the input to the ABS (before it splits to 2) it basically is that.

I have 2 pics I'll add when thumbsnap is back on line.

gsd2000

11,515 posts

214 months

Sunday 15th September 2013
quotequote all

gsd2000

11,515 posts

214 months

crisisjez

9,209 posts

236 months

Monday 16th September 2013
quotequote all
preciousmetal said:
Welcome JH, haven't got a clue what you are on about !!
Line lock is a front wheel brake system used in drag racing to do burn outs and load the car for launch.

MyM8V8

9,468 posts

226 months

Monday 16th September 2013
quotequote all
crisisjez said:
preciousmetal said:
Welcome JH, haven't got a clue what you are on about !!
Line lock is a front wheel brake system used in drag racing to do burn outs and load the car for launch.
What you do is come to a stop, press the brake pedal, engage the line lock and release the brake pedal. The front brakes are now applied (line locked) and the rears are free. Just press the loud pedal and hey presto, clouds of lovely rubber smoke. To free the front brakes, just flick the switch to disengage the line solenoid.


preciousmetal

3,373 posts

207 months

Monday 16th September 2013
quotequote all
MyM8V8 said:
crisisjez said:
preciousmetal said:
Welcome JH, haven't got a clue what you are on about !!
Line lock is a front wheel brake system used in drag racing to do burn outs and load the car for launch.
What you do is come to a stop, press the brake pedal, engage the line lock and release the brake pedal. The front brakes are now applied (line locked) and the rears are free. Just press the loud pedal and hey presto, clouds of lovely rubber smoke. To free the front brakes, just flick the switch to disengage the line solenoid.
Thanks all, makes sense now, just a strange term/name for it, sounds a bit fast and furious to me

MyM8V8

9,468 posts

226 months

Monday 16th September 2013
quotequote all
preciousmetal said:
MyM8V8 said:
crisisjez said:
preciousmetal said:
Welcome JH, haven't got a clue what you are on about !!
Line lock is a front wheel brake system used in drag racing to do burn outs and load the car for launch.
What you do is come to a stop, press the brake pedal, engage the line lock and release the brake pedal. The front brakes are now applied (line locked) and the rears are free. Just press the loud pedal and hey presto, clouds of lovely rubber smoke. To free the front brakes, just flick the switch to disengage the line solenoid.
Thanks all, makes sense now, just a strange term/name for it, sounds a bit fast and furious to me
Absolute peurility, but great fun wink

gsd2000

11,515 posts

214 months

Monday 16th September 2013
quotequote all
Brilliant fun, my best mod biggrin

vxr8 fq

255 posts

176 months

Monday 16th September 2013
quotequote all
Is there a system available for the r8 ?