Monaro HIDs
Author
Discussion

VinceM

Original Poster:

1,906 posts

169 months

Wednesday 11th December 2013
quotequote all
Thanks to Neil today, I found out that my ste headlights are down to the fact that they *are* indeed ste and not because they need adjusting. So, MOT issues notwithstanding, what are the pros and cons of getting some HIDs, where from and at what cost? TIA smile

007 VXR

64,187 posts

218 months

Wednesday 11th December 2013
quotequote all
Ooo, Tia's back hehe


Edited by 007 VXR on Wednesday 11th December 22:18

j666eds

642 posts

180 months

Wednesday 11th December 2013
quotequote all
got mine from http://www.hids-direct.co.uk they were about £60 and come with a 2 year warranty. massive improvement over the st tea lights that were fitted before.

Tattooboy

7,946 posts

209 months

Thursday 12th December 2013
quotequote all
Got mine from the same place mentioned above. been on for over 4 years and have no had any issues.

Easy to fit and no problems with beam pattern.

All I would say is don't go over 6000K or they start to look blue, I've got 6000K on mine, I'd say they look pure white.

Massive improvement over standard lights smile

SturdyHSV

10,443 posts

198 months

Thursday 12th December 2013
quotequote all
Tattooboy said:
Got mine from the same place mentioned above. been on for over 4 years and have no had any issues.

Easy to fit and no problems with beam pattern.

All I would say is don't go over 6000K or they start to look blue, I've got 6000K on mine, I'd say they look pure white.

Massive improvement over standard lights smile
Is this just the headlights, or the main beams as well?

maxmc2

2,063 posts

216 months

Thursday 12th December 2013
quotequote all
If you can hold fire until January head up to the NEC you'll be sure to get a set up there far cheaper.

I got mine from there a couple of years back and saved 25% on their online price.

The only thing ive found is the ballasts seem to go pretty quickly if you leave the lights on auto as this doesnt seem to be good for them on and off in tunnels so quickly.

This being said i purchased two spare and now have one left after two years of owning and only run with the lights either on or off.

Other thing is you will need to put the standard bulbs back in when you do the MOT as they are now failures if they cant be adjusted and don't have washers.

Tattooboy

7,946 posts

209 months

Thursday 12th December 2013
quotequote all
SturdyHSV said:
Tattooboy said:
Got mine from the same place mentioned above. been on for over 4 years and have no had any issues.

Easy to fit and no problems with beam pattern.

All I would say is don't go over 6000K or they start to look blue, I've got 6000K on mine, I'd say they look pure white.

Massive improvement over standard lights smile
Is this just the headlights, or the main beams as well?
I only done the headlights, I found the main beams OK, and in my case, not used that often ! smile

maxmc2

2,063 posts

216 months

Thursday 12th December 2013
quotequote all
Tattooboy said:
I only done the headlights, I found the main beams OK, and in my case, not used that often ! smile
+1

SturdyHSV

10,443 posts

198 months

Thursday 12th December 2013
quotequote all
Tattooboy said:
I only done the headlights, I found the main beams OK, and in my case, not used that often ! smile
Is it just a case of getting a kit that mimics the relevant bulb type? (H7 is it? H11? I can't remember and the FAQs are so far away hehe )

gsd2000

11,515 posts

214 months

Thursday 12th December 2013
quotequote all
H9 and h11

Tattooboy

7,946 posts

209 months

Thursday 12th December 2013
quotequote all
SturdyHSV said:
Tattooboy said:
I only done the headlights, I found the main beams OK, and in my case, not used that often ! smile
Is it just a case of getting a kit that mimics the relevant bulb type? (H7 is it? H11? I can't remember and the FAQs are so far away hehe )
Indeed it is smile

neiljohnson

11,298 posts

238 months

Thursday 12th December 2013
quotequote all
H11 bulbs in Vince's I assume they are all the same

Regarding the mot it's of no relevance as it's worded
"If" the vehicle has levelling & washers system fitted then it has to work

As the ro doesn't have it then it won't fail


StefanVXR8

3,620 posts

229 months

Thursday 12th December 2013
quotequote all
I've got a set of those HIDs with the ballast built in to the cap, designed for the Commodore, they have 6000K bulbs, there is a huge difference in light output compared to the 4300K bulbs in the kit on my previous R8.

I don't think it's a simple swap out though, I'm sure the ones in the 'Commodore kit' have 3 wires instead of two.

So from personal experience I'd go for the 4300K bulbs, they are a massive improvement over the standard projector headlamps in the Monaro and VXR8, HIDs work brilliantly in the projectors. I had a look at the beam pattern in the headlamp machine at Picadors last week and the pattern was perfect, just the same as halogen.

Just wish I'd gone for 4300K bulbs rolleyesbanghead

Stef

StefanVXR8

3,620 posts

229 months

Thursday 12th December 2013
quotequote all
neiljohnson said:
H11 bulbs in Vince's I assume they are all the same

Regarding the mot it's of no relevance as it's worded
"If" the vehicle has levelling & washers system fitted then it has to work

As the ro doesn't have it then it won't fail
Yep, no issues with the MOT with mine last year. I think as long as you have projectors they work fine and they don't look stoopid like the chav's fitted HIDs in standard headlamp housing.

Stef

Tattooboy

7,946 posts

209 months

Thursday 12th December 2013
quotequote all
neiljohnson said:
H11 bulbs in Vince's I assume they are all the same

Regarding the mot it's of no relevance as it's worded
"If" the vehicle has levelling & washers system fitted then it has to work

As the ro doesn't have it then it won't fail
thumbup

Behold81

2,931 posts

200 months

Thursday 12th December 2013
quotequote all
Wife's 300zx never fails with HIDS on the dipped setup.

Glyn84

668 posts

211 months

Thursday 12th December 2013
quotequote all
How do HIDs compare with fitting the main beam H9 bulbs into the dipped beam H11s by removing the tabs so they fit? I've been looking into upgrading the lighting and this was the other suggestion that kept cropping up for better lights so wondered how it compared.

north of watford

336 posts

214 months

Thursday 12th December 2013
quotequote all
Is the 50w HID kit needed, or would the 35w kit be OK and do I need a specific type of Canbus kit, or will any be OK. Sorry for all the questions, but I don't want to buy the wrong ones.

gsd2000

11,515 posts

214 months

Thursday 12th December 2013
quotequote all
Stick to 35w

Tattooboy

7,946 posts

209 months

Friday 13th December 2013
quotequote all
north of watford said:
Is the 50w HID kit needed, or would the 35w kit be OK and do I need a specific type of Canbus kit, or will any be OK. Sorry for all the questions, but I don't want to buy the wrong ones.
As Big G said, stick to 35W, the kit I got was the Canbus Pro HID Conversion Kit, the box with the Lambo on the front, 6000K.

Works a treat, the only tip I have, is, when fitting mine I just took the grey plastic cap of the headlight and drilled a hole, you get a rubber bung on the loom. Don't use the size hole cutter they say in the kit, I found it too big for the bung, find a cutter just bigger than the buld itself, the bung sits much tighter in the hole, as they say, a tight hole is a good hole thumbuphehe