Which supercharger would best suit Ls2 truck block?
Which supercharger would best suit Ls2 truck block?
Author
Discussion

Pablo82

Original Poster:

11 posts

154 months

Wednesday 8th January 2014
quotequote all
Hi everyone I have a Hsv 2001 senator signature I spent a lot of money on this car. But I really don't know much about engines so I'll tell you what I know. I have a receipt with every part listed in the engine so if you tell me what part to look for I could tell you what's in it. I got the original motor and box taken out. So what I know it's a 402 ci ls2 truck block running a 4L80E box. It produced 425 rwhp with 980 ft lbs of torque. I've only put 10,ooo Km on the motor in last 8 years it's been sitting in my garage and I want to do something with it for once and take it to some shows as it's only been to 1 and in a mag (street commodores) when I first did the car. If I could get it close too 850- 1000 hp I would be happy want to take it down strip as well as I've only been once. Thanks in advance for your help.

Edited by Pablo82 on Wednesday 8th January 14:49

Pablo82

Original Poster:

11 posts

154 months

Wednesday 8th January 2014
quotequote all
Engine pic

raving

1,183 posts

221 months

Wednesday 8th January 2014
quotequote all
Speak to Tony Rullo or Scottie at Capa Superchargers in Bury or Martin Donnan at Willall Racing in Adelaide they will advise what you need.

mikeyb1987

2,358 posts

185 months

Wednesday 8th January 2014
quotequote all
Is that torque figure correct- 980ft/lb?? eek

mik_ok

1,580 posts

272 months

Wednesday 8th January 2014
quotequote all
mikeyb1987 said:
Is that torque figure correct- 980ft/lb?? eek
I say "no".

jonnM

1,102 posts

170 months

Wednesday 8th January 2014
quotequote all
What's your budget? Going from 425 bhp to 850-1000bhp is not going to be cheap smile

ringram

14,702 posts

279 months

Wednesday 8th January 2014
quotequote all
mik_ok said:
mikeyb1987 said:
Is that torque figure correct- 980ft/lb?? eek
I say "no".
I guarantee its false

Tattooboy

7,946 posts

209 months

Wednesday 8th January 2014
quotequote all
For that HP, I'd say your best bet is going the Turbo route.

MyM8V8

9,468 posts

226 months

Wednesday 8th January 2014
quotequote all
Hi Mate.

Lovely car. Don't mess with it. My 2p.

jameshsv

5,844 posts

191 months

Wednesday 8th January 2014
quotequote all
MyM8V8 said:
Hi Mate.

Lovely car. Don't mess with it. My 2p.
+1 what a lovely car.

007 VXR

64,187 posts

218 months

Wednesday 8th January 2014
quotequote all
jameshsv said:
MyM8V8 said:
Hi Mate.

Lovely car. Don't mess with it. My 2p.
+1 what a lovely car.
+2

anonymous-user

85 months

Wednesday 8th January 2014
quotequote all
If it's a 402 I guess the engine's been apart for a stroker crank and forged (?) rods and pistons? Given what you've obviously spent and what it is I'd say leave well alone. If you want significantly more power, you maybe better off selling the whole engine and starting again but of course it's difficult to say unless you say what power level you are looking for.

Also, when you say "truck block" is it alloy (LS2) or more likely iron (LQ4/9) ?

Edit: Assuming you are looking for 1000hp look at one of these: www.chevrolet.com/performance/crate-engines/lsx-376-b15.html with Centri blower for traction.

Edited by anonymous-user on Wednesday 8th January 19:54

Pablo82

Original Poster:

11 posts

154 months

Thursday 9th January 2014
quotequote all
I'm going to find Dyno run sheets to prove the 980 ft lbs of torque I never talk st. And I will start uploading what's in engine.

Pablo82

Original Poster:

11 posts

154 months

Thursday 9th January 2014
quotequote all

Pablo82

Original Poster:

11 posts

154 months

Thursday 9th January 2014
quotequote all

mik_ok

1,580 posts

272 months

Thursday 9th January 2014
quotequote all
Pablo,

I wasn't suggesting you were talking 5hit, but there is a mathmatical mistake in there somewhere.

The relationship between bhp and torque(lbs.ft) is defined by

BHP = (Torque x rpm)/5252.

So if you were making:

980 lbs.ft at 3000rpm, you'd be making 560bhp at this rpm.
980 lbs.ft at 4000rpm, you'd be making 746bhp at this rpm.
980 lbs.ft at 5000rpm, you'd be making 932bhp at this rpm.

The power & torque numbers you've quoted just don't work together.

minime68

399 posts

166 months

Thursday 9th January 2014
quotequote all
Pablo,

I don't think they're calling you a liar. Most of us know that this figure is very unlikely and maybe a Dyno error if it does indeed display the number. No way a 400+hp petrol engine will have that kind of HP/TQ disparity. That's a number you may see on a diesel setup if you ask me. Do you currently have a forced induction setup on the LS2 or nitrous?

Pablo82

Original Poster:

11 posts

154 months

Thursday 9th January 2014
quotequote all
Would it have anything to do with the 4L80e box as I remember the engine builder saying with a manual it would be in the 500+ mark? I can't find my Dyno sheets but I will take it to another one and post results. It's def in the 900+ ft lbs and it's been on two different dynos in Western Australia and Queensland.

minime68

399 posts

166 months

Thursday 9th January 2014
quotequote all
Pablo82 said:
Would it have anything to do with the 4L80e box as I remember the engine builder saying with a manual it would be in the 500+ mark? I can't find my Dyno sheets but I will take it to another one and post results. It's def in the 900+ ft lbs and it's been on two different dynos in Western Australia and Queensland.
Maybe dyno in wrong gear? Need to dyno in gear closest to 1:1 ratio. I believe in this transmission it is 3rd gear with 4th being overdrive.

Pablo82

Original Poster:

11 posts

154 months

Thursday 9th January 2014
quotequote all
I'll take it to a Dyno in next few weeks and post results.