LT4 engine
Author
Discussion

anonymous-user

Original Poster:

85 months

Tuesday 14th January 2014
quotequote all

stick100

7,017 posts

199 months

Tuesday 14th January 2014
quotequote all
That engine ina corvette should be interesting the lt1s done pretty well but the new zo6 should be a animal

DaciaBumdart

22,454 posts

241 months

Tuesday 14th January 2014
quotequote all
How much for a crate engine?!?

stevieturbo

18,110 posts

278 months

Tuesday 14th January 2014
quotequote all
Those Corvettes are superb looking cars.

ringram

14,702 posts

279 months

Tuesday 14th January 2014
quotequote all
Im sure people were telling us you couldnt spin the blowers any faster because they didn't generate any more power.
Another piece of FUD exploded.

DaciaBumdart

22,454 posts

241 months

Tuesday 14th January 2014
quotequote all
ringram said:
Im sure people were telling us you couldnt spin the blowers any faster because they didn't generate any more power.
Another piece of FUD exploded.
tongue outopcorn:

ARAF

20,759 posts

254 months

Tuesday 14th January 2014
quotequote all
ringram said:
Im sure people were telling us you couldnt spin the blowers any faster because they didn't generate any more power.
Another piece of FUD exploded.
Wasn't that just certain blowers? This one will be spinning faster, but still only creating 9.5psi. I thought it was the amount of pressure being created, and the resulting heat generation that was the problem? scratchchin

DaciaBumdart

22,454 posts

241 months

Wednesday 15th January 2014
quotequote all
ARAF said:
Wasn't that just certain blowers? This one will be spinning faster, but still only creating 9.5psi. I thought it was the amount of pressure being created, and the resulting heat generation that was the problem? scratchchin
it looks like a good development, going for less capacity with smaller parts able to spin faster, quicker and with less thermal loss as a result. The figures as they stand are astonishing if it comes with a manufacturers warranty. I know the LS gets stick for being "old fashioned" but keeping it simple reaps huge rewards it seems.

Certainly now a real contender for a crate engine for those wanting big power out of the box. Just wonder what the LSA is what, 8k as a crate engine so if you consider the cost of a standard supercharge install I think I'd go that route. Certainly replacement s62s are mega money if/when it breaks I'd have to think long and hard at not using an LS of some form.

ringram

14,702 posts

279 months

Wednesday 15th January 2014
quotequote all
ARAF said:
Wasn't that just certain blowers? This one will be spinning faster, but still only creating 9.5psi. I thought it was the amount of pressure being created, and the resulting heat generation that was the problem? scratchchin
Yeah and how do you reduce pressure...!? Increase airflow.. Heads, cam etc.
Just like in kindy when 1+1=2

monkfish1

12,522 posts

255 months

Wednesday 15th January 2014
quotequote all
Interesting that torque is up over LS9 but power down. Logical given the blower size. Packaging driven no doubt, especially with all the fuel injection tackle ontop of the valley.

ARAF

20,759 posts

254 months

Wednesday 15th January 2014
quotequote all
ringram said:
ARAF said:
Wasn't that just certain blowers? This one will be spinning faster, but still only creating 9.5psi. I thought it was the amount of pressure being created, and the resulting heat generation that was the problem? scratchchin
Yeah and how do you reduce pressure...!? Increase airflow.. Heads, cam etc.
Just like in kindy when 1+1=2
True. smile Next you'll be trying to tell us that a supercharger isn't really needed. wink

neiljohnson

11,298 posts

238 months

Wednesday 15th January 2014
quotequote all
That corvette is the best looking new car I've seen car in a long time