Pontiac G8/VXR8 Remapping/Tuning
Pontiac G8/VXR8 Remapping/Tuning
Author
Discussion

GM4life

Original Poster:

93 posts

175 months

Thursday 16th January 2014
quotequote all
Hello,

Looking for tuners in the East Anglia area that can remap/tune a '09 Pontiac G8 GT. Can anyone help me out? Thanks.

ringram

14,702 posts

279 months

Thursday 16th January 2014
quotequote all
Any LS tuner should be fine.
You may have to travel some.

007 VXR

64,187 posts

218 months

Friday 17th January 2014
quotequote all
Monkfish is were most will go.

foordy1980

67 posts

187 months

Friday 17th January 2014
quotequote all
Is the oem ecu open source remapable or is a software such a ecutek required?

DaciaBumdart

22,454 posts

241 months

Friday 17th January 2014
quotequote all
foordy1980 said:
Is the oem ecu open source remapable or is a software such a ecutek required?
the ecu is editable by specific software such as HPTuners or EFILive although apparently you can get a Bluefin dongle that will give you 800 extra brake horse power but the only dyno near to where the lad who bought one refuses to dyno test a single car.




S800VXR

5,877 posts

231 months

Friday 17th January 2014
quotequote all
YHM

StefanVXR8

3,620 posts

229 months

Sunday 19th January 2014
quotequote all
Why not go down the Diablosport route?

They do the I-1000 or the T-1000 for the G8, gives about 25BHP and 25 Torque and the beauty is you just load and unload as and when you need to get it serviced etc.

The unit does many other things too and acts as a code reader.

I used to have one on my old Chrysler 300C SRT8 and pound for pound (or should that be dollar for dollar) it was the best tuning bit of kit I ever bought! Not only did it remap the engine but it also re-mapped the gearbox, allowed me to play with the cooling fan settings allowing fitment of a colder thermostat etc, does timing, fueling etc. They also give the ability to record all your settings so you can send the tune away and get it remotely tuned, I did this with the SRT8 and managed to squeeze just shy of 500BHP out it from a bespoke tune from a guy called Johan in Florida.

Stef

DaciaBumdart

22,454 posts

241 months

Sunday 19th January 2014
quotequote all
Isnt that just like the Bluefin tuna?

GM4life

Original Poster:

93 posts

175 months

Sunday 19th January 2014
quotequote all
StefanVXR8 said:
Why not go down the Diablosport route?

They do the I-1000 or the T-1000 for the G8, gives about 25BHP and 25 Torque and the beauty is you just load and unload as and when you need to get it serviced etc.

The unit does many other things too and acts as a code reader.

I used to have one on my old Chrysler 300C SRT8 and pound for pound (or should that be dollar for dollar) it was the best tuning bit of kit I ever bought! Not only did it remap the engine but it also re-mapped the gearbox, allowed me to play with the cooling fan settings allowing fitment of a colder thermostat etc, does timing, fueling etc. They also give the ability to record all your settings so you can send the tune away and get it remotely tuned, I did this with the SRT8 and managed to squeeze just shy of 500BHP out it from a bespoke tune from a guy called Johan in Florida.

Stef
I've used a Diablosport tuner years ago. Its just not as detailed as HPTuners what I have now. This car is getting a cam, and header swap. Thanks for the help.

DaciaBumdart

22,454 posts

241 months

Sunday 19th January 2014
quotequote all
if you have HPTuners (cough spit!) you might want to have a chat with Monkfish as I believe Wortec use HPT. Or grab a competitive swap to EFIlive

ringram

14,702 posts

279 months

Sunday 19th January 2014
quotequote all
I think he may just have an hpt tune in there now rather than the hardware!?

What cam is going in?

GM4life

Original Poster:

93 posts

175 months

Monday 20th January 2014
quotequote all
I have HPTuners software. The tune is for a friend. Can is going to be a 224 dur/ 114 LSA

ringram

14,702 posts

279 months

Monday 20th January 2014
quotequote all
Maybe just get a mail order tune from the US?
Flash it in with your unit and get it tweaked if needed.
The cam is small so shouldn't be a challenge for anyone.

Or just roll your own wink

GM4life

Original Poster:

93 posts

175 months

Monday 20th January 2014
quotequote all
ringram said:
Maybe just get a mail order tune from the US?
Flash it in with your unit and get it tweaked if needed.
The cam is small so shouldn't be a challenge for anyone.

Or just roll your own wink
Mail order tunes don't get the full potential from the car as if it was tune in the actual environment, they are risky also. I would tune it myself but being a novice I wouldn't want to cause damage to a vehicle that isn't mine:-)

MyM8V8

9,468 posts

226 months

Monday 20th January 2014
quotequote all
S800VXR said:
YHM
I wonder what that said???? wink

MyM8V8

9,468 posts

226 months

Monday 20th January 2014
quotequote all
GM4life said:
ringram said:
Maybe just get a mail order tune from the US?
Flash it in with your unit and get it tweaked if needed.
The cam is small so shouldn't be a challenge for anyone.

Or just roll your own wink
Mail order tunes don't get the full potential from the car as if it was tune in the actual environment, they are risky also. I would tune it myself but being a novice I wouldn't want to cause damage to a vehicle that isn't mine:-)
Shame you don't have Efilive as Oztrack in Australia are pretty good at remote tunes, if you have the kit. I'd have a guess he could be on the money with just an adjustment or two.

mikeyb1987

2,358 posts

185 months

Monday 20th January 2014
quotequote all
Maybe a bit too far north (Doncaster), but you could drop John Sleath a line...