dyno testing a auto
dyno testing a auto
Author
Discussion

kaw

Original Poster:

1,081 posts

215 months

Sunday 26th January 2014
quotequote all
Dyno testing a auto ,ive been told that the stall converter will not lock up ,something to do with the front wheels not turning at the same speed as the rears is this true ,if so theres a dyno not far from me that has a 4 wheel set up that can be set to drive the fronts at the same speed when testing rear wheel drive only cars does this sound right ,if so should be able to get a true reading ,whats peoples thoughts on this

jameshsv

5,844 posts

191 months

Sunday 26th January 2014
quotequote all
Cannot see any probs with auto r8.a few auto cars ok at srr

S800VXR

5,877 posts

231 months

Sunday 26th January 2014
quotequote all
Mine dyno'ed ok at SRR. Think you need to set it up somehow rather than just drop it on and go.

ringram

14,702 posts

279 months

Sunday 26th January 2014
quotequote all
bks reason made up by someone ill informed.

But the TC wont lock up under full throttle, thats purely tune based. You can force it with something like efilive on the dyno, or if you have a beefier TC you can even lock it on full throttle and during shifts permanently.

Thats what the triple plate converters are for..

MyM8V8

9,468 posts

226 months

Sunday 26th January 2014
quotequote all
ringram said:
bks reason made up by someone ill informed.

But the TC wont lock up under full throttle, thats purely tune based. You can force it with something like efilive on the dyno, or if you have a beefier TC you can even lock it on full throttle and during shifts permanently.

Thats what the triple plate converters are for..
Well actually I tried with a Circle D triple lock up 4200 stall and couldn't get it to lock up even using efilive manual intervention. Had a word with Blacky at efilive but never got a definitive answer to the issue I had. Maybe something to do with the E40/T42 set up. But the PCM overcomes whatever the tune or the V2 tells it and unlocks the clutch as soon as it sees full throttle.

Oh, and if you've ever tried forcing a change in lock up, you'd know why it wasn't a good idea. wink


Edited by MyM8V8 on Sunday 26th January 21:39


Edited by MyM8V8 on Sunday 26th January 21:39

MyM8V8

9,468 posts

226 months

Sunday 26th January 2014
quotequote all
S800VXR said:
Mine dyno'ed ok at SRR. Think you need to set it up somehow rather than just drop it on and go.
Have you got a high stall?

MyM8V8

9,468 posts

226 months

Sunday 26th January 2014
quotequote all
jameshsv said:
Cannot see any probs with auto r8.a few auto cars ok at srr
Standard setups.

S800VXR

5,877 posts

231 months

Sunday 26th January 2014
quotequote all
MyM8V8 said:
S800VXR said:
Mine dyno'ed ok at SRR. Think you need to set it up somehow rather than just drop it on and go.
Have you got a high stall?
Stock converter, just uprated flex plate for now.

stick100

7,017 posts

199 months

Sunday 26th January 2014
quotequote all
Charlie @ srr from memory always hated doing autos for the reasons above

MyM8V8

9,468 posts

226 months

Sunday 26th January 2014
quotequote all
S800VXR said:
MyM8V8 said:
S800VXR said:
Mine dyno'ed ok at SRR. Think you need to set it up somehow rather than just drop it on and go.
Have you got a high stall?
Stock converter, just uprated flex plate for now.
What did it make?

ringram

14,702 posts

279 months

Sunday 26th January 2014
quotequote all
The E40/T42 was a one year wonder. So I cant comment on the support for it.
But the official line is you should be able to lock it on the dyno with the bidirectional controls.

Ive messed with the lockup plenty on mine. I unlock so as not to lug the engine and only lock at light loads.

But no lock during shifts or at WOT. I imagine it is hard on parts! Hence why I have avoided it.
Some guys like to lock in 3rd only for a few more mph over the line.

It is possible, though is it sensible is another story..




MyM8V8

9,468 posts

226 months

Monday 27th January 2014
quotequote all
ringram said:
The E40/T42 was a one year wonder. So I cant comment on the support for it.
But the official line is you should be able to lock it on the dyno with the bidirectional controls.

Ive messed with the lockup plenty on mine. I unlock so as not to lug the engine and only lock at light loads.

But no lock during shifts or at WOT. I imagine it is hard on parts! Hence why I have avoided it.
Some guys like to lock in 3rd only for a few more mph over the line.

It is possible, though is it sensible is another story..
As I said unable to lock mine up for the dyno. E40 is a POS.

S800VXR

5,877 posts

231 months

Monday 27th January 2014
quotequote all
MyM8V8 said:
What did it make?
330rwhp stock.

MyM8V8

9,468 posts

226 months

Monday 27th January 2014
quotequote all
S800VXR said:
MyM8V8 said:
What did it make?
330rwhp stock.
And after?

ringram

14,702 posts

279 months

Monday 27th January 2014
quotequote all
Roger have you got a billet stall on order?
If not why not?

kaw

Original Poster:

1,081 posts

215 months

Monday 27th January 2014
quotequote all
Running an old oztrack tune at the moment.still trying to sort a tune to suit the new stall and charger,so it,s abit suck it and see then guys all in the tune

kaw

Original Poster:

1,081 posts

215 months

Monday 27th January 2014
quotequote all
Running an old oztrack tune at the moment.still trying to sort a tune to suit the new stall and charger,so it,s abit suck it and see then guys all in the tune

kaw

Original Poster:

1,081 posts

215 months

Monday 27th January 2014
quotequote all
Running an old oztrack tune at the moment.still trying to sort a tune to suit the new stall and charger,so it,s abit suck it and see then guys all in the tune

S800VXR

5,877 posts

231 months

Monday 27th January 2014
quotequote all
ringram said:
Roger have you got a billet stall on order?
If not why not?
Running a stock engine so no silly HP yet. When I go forged later in the year il do it then IF I can get a low stall unit. Also I'm not made of money!! wink

Gareth - no idea yet as they started mapping today.

ringram

14,702 posts

279 months

Monday 27th January 2014
quotequote all
Well you better hope the stock one doesn't balloon.

You can get what ever stall you ask for. Just go for near stock diameter otherwise rotational inertia will also change the idle characteristics..