Stevieturbo - Build an engine?
Stevieturbo - Build an engine?
Author
Discussion

MyM8V8

Original Poster:

9,468 posts

226 months

Friday 7th February 2014
quotequote all
If you were going to do another engine build and starting with a clean sheet and reasonable budget what would you spec up? Not a full blown race car but what you have now but Mk11 (but hopefully in a Ro)???

neiljohnson

11,298 posts

238 months

Saturday 8th February 2014
quotequote all
Bump
ears

stevieturbo

18,106 posts

278 months

Saturday 8th February 2014
quotequote all
MyM8V8 said:
If you were going to do another engine build and starting with a clean sheet and reasonable budget what would you spec up? Not a full blown race car but what you have now but Mk11 (but hopefully in a Ro)???
How long is a piece of string really ?

What application, what power etc ?

My own is certainly nothing fancy.

It's just an LS2 block, changed a couple of years ago to 3.8" stroke crank from 4". Diamond pistons and TFS 225cc heads.
Heads are some 5-6 years old so undoubtedly there are much better options out there now.

Only changes I'd make or will be making in the nearish future is to a block with oil squirters and pinned billet main caps.

I think some of the newer blocks actually offer that now anyway ? Definitely some have the oil squirters. I think the LSX has pinned billet caps ? If you can suffer the weight of the iron block

Ive no interest in adding extra weight though regardless.

Any valvetrain/cam related parts would depend on what sort of rpm's you intended to run.

You certainly dont need to spend a fortune to have a good strong and reliable base engine.

MyM8V8

Original Poster:

9,468 posts

226 months

Saturday 8th February 2014
quotequote all
stevieturbo said:
MyM8V8 said:
If you were going to do another engine build and starting with a clean sheet and reasonable budget what would you spec up? Not a full blown race car but what you have now but Mk11 (but hopefully in a Ro)???
How long is a piece of string really ?

What application, what power etc ?

My own is certainly nothing fancy.

It's just an LS2 block, changed a couple of years ago to 3.8" stroke crank from 4". Diamond pistons and TFS 225cc heads.
Heads are some 5-6 years old so undoubtedly there are much better options out there now.

Only changes I'd make or will be making in the nearish future is to a block with oil squirters and pinned billet main caps.

I think some of the newer blocks actually offer that now anyway ? Definitely some have the oil squirters. I think the LSX has pinned billet caps ? If you can suffer the weight of the iron block

Ive no interest in adding extra weight though regardless.

Any valvetrain/cam related parts would depend on what sort of rpm's you intended to run.

You certainly dont need to spend a fortune to have a good strong and reliable base engine.
Important thing is, which way would you go on FI?

stevieturbo

18,106 posts

278 months

Saturday 8th February 2014
quotequote all
MyM8V8 said:
Important thing is, which way would you go on FI?
Well you can be sure it would have boost ! lol one way or another.

But again it would depend on overall goals for the car and user. Everyone is different and wants different things.

A PD style blower can be great, a centri can be great and turbos can be great. They all offer different things to appease different people

MyM8V8

Original Poster:

9,468 posts

226 months

Saturday 8th February 2014
quotequote all
I'm going for a centri set up on the next one. Need to do some reading up.

ringram

14,702 posts

279 months

Sunday 9th February 2014
quotequote all
That would be my preference.
The intake track is much more optimal.
Though intercooler pipework is a bit messy.
Then balance the parts to suit application and power output.

gsd2000

11,515 posts

214 months

Sunday 9th February 2014
quotequote all
stevieturbo said:
MyM8V8 said:
If you were going to do another engine build and starting with a clean sheet and reasonable budget what would you spec up? Not a full blown race car but what you have now but Mk11 (but hopefully in a Ro)???
How long is a piece of string really ?

What application, what power etc ?

My own is certainly nothing fancy.

It's just an LS2 block, changed a couple of years ago to 3.8" stroke crank from 4". Diamond pistons and TFS 225cc heads.
Heads are some 5-6 years old so undoubtedly there are much better options out there now.

Only changes I'd make or will be making in the nearish future is to a block with oil squirters and pinned billet main caps.

I think some of the newer blocks actually offer that now anyway ? Definitely some have the oil squirters. I think the LSX has pinned billet caps ? If you can suffer the weight of the iron block

Ive no interest in adding extra weight though regardless.

Any valvetrain/cam related parts would depend on what sort of rpm's you intended to run.

You certainly dont need to spend a fortune to have a good strong and reliable base engine.
Are you running oil squirters with your ls2 block Stevie?

stevieturbo

18,106 posts

278 months

Sunday 9th February 2014
quotequote all
gsd2000 said:
Are you running oil squirters with your ls2 block Stevie?
Not currently. But I've another block sitting here ready to change that does have them.....if I can ever be bothered to change it lol

gsd2000

11,515 posts

214 months

Sunday 9th February 2014
quotequote all
stevieturbo said:
gsd2000 said:
Are you running oil squirters with your ls2 block Stevie?
Not currently. But I've another block sitting here ready to change that does have them.....if I can ever be bothered to change it lol
katech squirters or LSA block?

Boosted LS1

21,200 posts

291 months

Sunday 9th February 2014
quotequote all
If you swop out the pistons you'll need to make sure they don't foul the squirters.

stevieturbo

18,106 posts

278 months

Sunday 9th February 2014
quotequote all
gsd2000 said:
katech squirters or LSA block?
Katech fitted to an LS2 block.

Ive no interest in changing blocks as I'd then need to buy new pistons as well.

Although if starting from scratch, probably would look at an LSA or some other block that already had them available.

stevieturbo

18,106 posts

278 months

Sunday 9th February 2014
quotequote all
MyM8V8 said:
I'm going for a centri set up on the next one. Need to do some reading up.
For simplicity's sake. I'd buy the front end accessories for the 2010 Camaro and then you can just buy any kits for that same vehicle.

And there are kits from multiple sellers for virtually any supercharger you could ever want.

Dont waste time trying to piece one together. Buy something that is already proven to work.

gsd2000

11,515 posts

214 months

Sunday 9th February 2014
quotequote all
The small prochargers seem to make good numbers

MyM8V8

Original Poster:

9,468 posts

226 months

Sunday 9th February 2014
quotequote all
stevieturbo said:
MyM8V8 said:
I'm going for a centri set up on the next one. Need to do some reading up.
For simplicity's sake. I'd buy the front end accessories for the 2010 Camaro and then you can just buy any kits for that same vehicle.

And there are kits from multiple sellers for virtually any supercharger you could ever want.

Dont waste time trying to piece one together. Buy something that is already proven to work.
Thanks for that.