Discussion
Had it done when I bought some VXR calipers/discs/pads for my CV8, they had obviously been stored outside or not in a dry place and where a bit pitted. My mechanic took them to a metal work shop next door to his garage who skimmed the discs, just took a tiny fraction of disc surface off to smooth them off, charged £10 per disc.
It works very well as long as the discs still have a good amount of life in them price is normally @ 40-50 a hub scc in St. Albans do it.
Trouble is the 5's front brake set up is s
t if the discs & pads are not genuine they will be even worse
The control arms can also cause vibration if the bushes are on there way out too
This is how I sorted the in laws once & for all cost 2k though

Believe me when I say we tried every other option to sort it with no lasting results
Trouble is the 5's front brake set up is s
t if the discs & pads are not genuine they will be even worseThe control arms can also cause vibration if the bushes are on there way out too
This is how I sorted the in laws once & for all cost 2k though


Believe me when I say we tried every other option to sort it with no lasting results

yeah a BBK is not on the cards the breaks aren't too bad its the control arm bushes that I believe start the rocky road.
Just replaced the bushes with ploy's, much much better one of those subtle transformations that translates to something bigger. That got rid of the brake and shake, just a high speed judder. Parts should be original. it ws only serviced at BMW and was AUC supplied so figure give them a skim first its only a few quid. It could be s
t on the pads but doubt it....
Cheers Neil. I do hear what you are saying re breaks but 2k is off the cards until bonus time!
Just replaced the bushes with ploy's, much much better one of those subtle transformations that translates to something bigger. That got rid of the brake and shake, just a high speed judder. Parts should be original. it ws only serviced at BMW and was AUC supplied so figure give them a skim first its only a few quid. It could be s
t on the pads but doubt it.... Cheers Neil. I do hear what you are saying re breaks but 2k is off the cards until bonus time!
DaciaBumdart said:
yeah a BBK is not on the cards the breaks aren't too bad its the control arm bushes that I believe start the rocky road.
Just replaced the bushes with ploy's, much much better one of those subtle transformations that translates to something bigger. That got rid of the brake and shake, just a high speed judder. Parts should be original. it ws only serviced at BMW and was AUC supplied so figure give them a skim first its only a few quid. It could be s
t on the pads but doubt it....
Cheers Neil. I do hear what you are saying re breaks but 2k is off the cards until bonus time!
If they are genuine then you have 1/2 a chance make sure the calipers are clean & nice & smooth on the slidersJust replaced the bushes with ploy's, much much better one of those subtle transformations that translates to something bigger. That got rid of the brake and shake, just a high speed judder. Parts should be original. it ws only serviced at BMW and was AUC supplied so figure give them a skim first its only a few quid. It could be s
t on the pads but doubt it.... Cheers Neil. I do hear what you are saying re breaks but 2k is off the cards until bonus time!
I fitted x5 bushes to the inlaws control arms & it did make a hell of a difference although the old ones were pretty fubar!
He spent a lot of money on the car last year on the ap's, miltek & superchip as well as maf's clutch & flywheel & lots of odds & sods but it was cheaper than buying a v10 & has made it a complete car.
neiljohnson said:
It works very well as long as the discs still have a good amount of life in them price is normally @ 40-50 a hub scc in St. Albans do it.
Trouble is the 5's front brake set up is s
t if the discs & pads are not genuine they will be even worse
The control arms can also cause vibration if the bushes are on there way out too
This is how I sorted the in laws once & for all cost 2k though

Believe me when I say we tried every other option to sort it with no lasting results
Looks like you drove it into a kerb or large pothole lolTrouble is the 5's front brake set up is s
t if the discs & pads are not genuine they will be even worseThe control arms can also cause vibration if the bushes are on there way out too
This is how I sorted the in laws once & for all cost 2k though


Believe me when I say we tried every other option to sort it with no lasting results

Please take my money mr Garage. Top Lads don't want my money, checked the discs/pads for wear before doing the job.... Mr Burns, you've only got 10% wear (they were new when I bought it 16 months ago, I just drive smooth) and don't want to do the job.
Took time to explain the symptoms and they still are hesitant but agree to do it as its a step in the diagnosis. Its a slight break shim at 80-70 type breaking, well its worth a shot
Took time to explain the symptoms and they still are hesitant but agree to do it as its a step in the diagnosis. Its a slight break shim at 80-70 type breaking, well its worth a shot
DaciaBumdart said:
the benefit of on hub is they are true to hub rotation/tolerances. I took it for a drive tonight (to pick up a valentines day gift) and it needs doing, its got to be micro transfer I still don't buy into warping, not of the disc but possibly of the mounting
Pretty sure it was transfer that was causing Shaun's issues as if you hammered the brakes from 140-30 a few times the problem would reduce but then gradually come back, did try some uprated pads (performance friction i think) these were loads better but didn't stop it completely neiljohnson said:
DaciaBumdart said:
the benefit of on hub is they are true to hub rotation/tolerances. I took it for a drive tonight (to pick up a valentines day gift) and it needs doing, its got to be micro transfer I still don't buy into warping, not of the disc but possibly of the mounting
Pretty sure it was transfer that was causing Shaun's issues as if you hammered the brakes from 140-30 a few times the problem would reduce but then gradually come back, did try some uprated pads (performance friction i think) these were loads better but didn't stop it completely BTW when we took the bushes out, they looked like they were the originals with a date stamp of 00 :O
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff





