R8 alternator
Author
Discussion

stick100

Original Poster:

7,017 posts

199 months

Saturday 15th February 2014
quotequote all
Has anyone got the gm part number for a 2008 ls3 r8
Alternator


Thanks

Edited by stick100 on Saturday 15th February 19:46

jameshsv

5,844 posts

191 months

Saturday 15th February 2014
quotequote all
stick100 said:
Has anyone got the gm part number for a 2008 ls3 r8



Thanks
pm vxr8girl isn't hers ls3 or leigh1050 is a ls3

Vxr8Girl

207 posts

171 months

Saturday 15th February 2014
quotequote all
Mines an LS2 so don't think that will help frown

leigh1050

2,465 posts

196 months

Sunday 16th February 2014
quotequote all
I'll have a look and see if I can find it.
Mick I've had a look and can just about see the alternator but no number.
Had a look on the web, Performance Parts have got them in stock in the U.K. at £249.99 with an old part no of 10327514 also had a look on an American site and they give the part no. for ls7 ls3's as 2588970 or 13501721.

Edited by leigh1050 on Sunday 16th February 09:49

Monaro5.7

7,337 posts

210 months

Sunday 16th February 2014
quotequote all
If you have the OE number go to woodauto.com they have a good xref tool there. Or if your no in a rush there ia a company in Preston i think called ribbelsdale. We send all our odd ball stuff to them for reconning and it dont take long.

stick100

Original Poster:

7,017 posts

199 months

Sunday 16th February 2014
quotequote all
leigh1050 said:
I'll have a look and see if I can find it.
Mick I've had a look and can just about see the alternator but no number.
Had a look on the web, Performance Parts have got them in stock in the U.K. at £249.99 with an old part no of 10327514 also had a look on an American site and they give the part no. for ls7 ls3's as 2588970 or 13501721.

Edited by leigh1050 on Sunday 16th February 09:49
I've got one from pwp but it has 3 pins and I only have 2 wires
So I was hopeing that I could cross ref the gm part number off the original oem one and buy one instead of rewireing my loom to suit the 3 pin one I've got

stevieturbo

18,106 posts

278 months

Sunday 16th February 2014
quotequote all
Is the plug the same though ?

Early Camaro alternators had 4 pins, but only 1 wire was actually needed

Later units needed 2 wires, but still the same 4 pin plug.

stick100

Original Poster:

7,017 posts

199 months

Sunday 16th February 2014
quotequote all
stevieturbo said:
Is the plug the same though ?

Early Camaro alternators had 4 pins, but only 1 wire was actually needed

Later units needed 2 wires, but still the same 4 pin plug.
The plug on the r8 is different I know what your saying and when I ordered the alternator I didn't think there'd be a problem
But I can't get the dam thing to charge and I can't find a wiring diagram for the 3 pin that I've got only the 4 pin
And the 2 wires I've got on the loom don't do what any of the diagrams say they should

stevieturbo

18,106 posts

278 months

Monday 17th February 2014
quotequote all
stick100 said:
The plug on the r8 is different I know what your saying and when I ordered the alternator I didn't think there'd be a problem
But I can't get the dam thing to charge and I can't find a wiring diagram for the 3 pin that I've got only the 4 pin
And the 2 wires I've got on the loom don't do what any of the diagrams say they should
Take it to an alternator guy, or ask over on Tech.

A lot of modern alternators are ecu controlled, so that's maybe the bit you're missing. Or a local alternator repair place might be able to tell you what you need, or swap the regulator to something older and more primitive....ie one that works with one wire ! lol

After mine packed in last year and had problems with repair, I bought one of these higher output units.
Although it did require some adjusting of brackets to make it fit. Seemed decent enough value to me. I just went with the 170A version, simple 1 wire hookup as of alternators of days gone by.
ie main battery lead and 1 wire to light in dash.

http://alternatorparts.com/ad230-ad244-series-high...

Edited by stevieturbo on Monday 17th February 09:58

snowwolf

11,503 posts

206 months

Monday 17th February 2014
quotequote all
stevieturbo said:
Take it to an alternator guy, or ask over on Tech.

A lot of modern alternators are ecu controlled, so that's maybe the bit you're missing. Or a local alternator repair place might be able to tell you what you need, or swap the regulator to something older and more primitive....ie one that works with one wire ! lol

After mine packed in last year and had problems with repair, I bought one of these higher output units.
Although it did require some adjusting of brackets to make it fit. Seemed decent enough value to me. I just went with the 170A version, simple 1 wire hookup as of alternators of days gone by.
ie main battery lead and 1 wire to light in dash.

http://alternatorparts.com/ad230-ad244-series-high...

Edited by stevieturbo on Monday 17th February 09:58
Nice bit of info Stevie

motomk

2,188 posts

275 months

Monday 17th February 2014
quotequote all
I can find the Pontiac GXP number but that is for an Auto. Would that be on the same side for a LHD drive car???
It looks like the 6 litre ones from the standard Holdens don't work with the LS3.
If I have time tomorrow I will try and ask a local Holden/HSV dealership.
VE manual LS3 2008-2009?







stick100

Original Poster:

7,017 posts

199 months

Monday 17th February 2014
quotequote all
motomk said:
I can find the Pontiac GXP number but that is for an Auto. Would that be on the same side for a LHD drive car???
It looks like the 6 litre ones from the standard Holdens don't work with the LS3.
If I have time tomorrow I will try and ask a local Holden/HSV dealership.
VE manual LS3 2008-2009?





Thanks mate it's a ls3 2008

motomk

2,188 posts

275 months

Tuesday 18th February 2014
quotequote all
stick100 said:
Thanks mate it's a ls3 2008
Message sent. Need your VIN as there are about 4 different versions. 3 pin plug with 2 wires? is what you have? It was mentioned there are various plugs on them depnding on the VIN.




stick100

Original Poster:

7,017 posts

199 months

Wednesday 19th February 2014
quotequote all
motomk said:
Message sent. Need your VIN as there are about 4 different versions. 3 pin plug with 2 wires? is what you have? It was mentioned there are various plugs on them depnding on the VIN.



Thanks mate ill email you the vin

gsd2000

11,515 posts

214 months

Wednesday 19th February 2014
quotequote all
Rockauto?

Monaro5.7

7,337 posts

210 months

Wednesday 19th February 2014
quotequote all
look at the link there is lots of part numbers there to work with.

http://www.woodauto.com/(F(VG60lIuYXy905y_i3B0ih6g...

Also found a part number from a company called WPS Part number 13969N

Edited by Monaro5.7 on Wednesday 19th February 10:30

Monaro5.7

7,337 posts

210 months

Thursday 20th February 2014
quotequote all
Any news ears

stick100

Original Poster:

7,017 posts

199 months

Thursday 20th February 2014
quotequote all
Monaro5.7 said:
Any news ears
Yep the one I've already got is the same as the one you got the part no for
So it means I've got a problem some where else

Ow the joys of it all

Monaro5.7

7,337 posts

210 months

Thursday 20th February 2014
quotequote all
stick100 said:
Monaro5.7 said:
Any news ears
Yep the one I've already got is the same as the one you got the part no for
So it means I've got a problem some where else

Ow the joys of it all
Whats the issue?

The link below is what looks like an alternative to what we have been looking at from Delco Remy


http://catalog.remyinc.com/Product/Details/12788?i...

Edited by Monaro5.7 on Thursday 20th February 15:47

motomk

2,188 posts

275 months

Friday 21st February 2014
quotequote all
stick100 said:
Thanks mate ill email you the vin
? smile

Edited by motomk on Friday 21st February 01:25