Power Steering Leaking - Buying QwikRack and What else?
Power Steering Leaking - Buying QwikRack and What else?
Author
Discussion

Wyld Stallyn

Original Poster:

2,056 posts

159 months

Sunday 16th February 2014
quotequote all
Afternoon Folks,

wavey

Looks Like My Cunning Plan has Gone Somewhat Awry redface

Was Gonna get a QwikRack Fitted at the sametime as having the poly bushes done @ the 'Fish and replace the Weeping steering rack. However it left a short trail of fluid in the carpark yesterday - topped up the fluid only needed 200ml (not great but not good).

I've done a quick reckie and there is fluid hanging off the conduit in the engine bay on the passenger side of the car.

Where should I look to see more?

Obviously I need a new Rack - is there anything else that may have let go or is liable to let go (Preventative Maintenance) that I should order when I get the 'Rack sent down.

Cheers

Chewie

gsd2000

11,515 posts

214 months

Sunday 16th February 2014
quotequote all
Follow the pipe out of the power steering res which heads to the front of the car to the cooler.

The cooler at the front usually goes due to corrosion as can the pipe between the cooler and the res.

Rhe pipe between the cooler and res bolts to the front subframe and is easy to spot

Wyld Stallyn

Original Poster:

2,056 posts

159 months

Sunday 16th February 2014
quotequote all
gsd2000 said:
Follow the pipe out of the power steering res which heads to the front of the car to the cooler.

The cooler at the front usually goes due to corrosion as can the pipe between the cooler and the res.

Rhe pipe between the cooler and res bolts to the front subframe and is easy to spot
thumbup

Cooler is quite new so should be ok, but will check

ARAF

20,759 posts

254 months

Sunday 16th February 2014
quotequote all
Wyld Stallyn said:
thumbup

Cooler is quite new so should be ok, but will check
Could just be a loose nut (apart from the one that drives it wink ) then. Check that all couplings are dry and tight.

S800VXR

5,877 posts

231 months

Sunday 16th February 2014
quotequote all
Back to the topic question, what else should you have fitted....

Harrows diff cover
Supercar coilovers
Pedders ARB
Full Wortec inc headers
TVS2300
OTR
Rear poly bushes
Ripshifter

That will do for starters. wink

Wyld Stallyn

Original Poster:

2,056 posts

159 months

Sunday 16th February 2014
quotequote all
ARAF said:
Wyld Stallyn said:
thumbup

Cooler is quite new so should be ok, but will check
Could just be a loose nut (apart from the one that drives it wink ) then. Check that all couplings are dry and tight.
One Foam Mat, 4 Bricks, Some Kitchen Roll and a Stubby Screwdriver Later,

It Looks and Sounds and Feels Like Job's a Good'Un coolthumbup

Jubilee Clip on Fat Hose from PAS Reservoir was Not Tightened Fully eek

Thanks Guys clap


007 VXR

64,187 posts

218 months

Sunday 16th February 2014
quotequote all
S800VXR said:
Back to the topic question, what else should you have fitted....

Harrows diff cover
Supercar coilovers
Pedders ARB
Full Wortec inc headers
TVS2300
OTR
Rear poly bushes
Ripshifter

That will do for starters. wink
hehe

Wyld Stallyn

Original Poster:

2,056 posts

159 months

Sunday 16th February 2014
quotequote all
S800VXR said:
Back to the topic question, what else should you have fitted....

Harrows diff cover
Supercar coilovers
Pedders ARB
Full Wortec inc headers - ALREADY ORDERED
TVS2300
OTR
Rear poly bushes - ROAD RESPONSE PAC ORDERED
Ripshifter

That will do for starters. wink
Back to PLAN B - Bein 'Fished on March 10th thumbup

gsd2000

11,515 posts

214 months

Sunday 16th February 2014
quotequote all
Wyld Stallyn said:
ARAF said:
Wyld Stallyn said:
thumbup

Cooler is quite new so should be ok, but will check
Could just be a loose nut (apart from the one that drives it wink ) then. Check that all couplings are dry and tight.
One Foam Mat, 4 Bricks, Some Kitchen Roll and a Stubby Screwdriver Later,

It Looks and Sounds and Feels Like Job's a Good'Un coolthumbup

Jubilee Clip on Fat Hose from PAS Reservoir was Not Tightened Fully eek

Thanks Guys clap
Thats the res to power steering pump hose. Glad you sorted it

ARAF

20,759 posts

254 months

Sunday 16th February 2014
quotequote all
Wyld Stallyn said:
One Foam Mat, 4 Bricks, Some Kitchen Roll and a Stubby Screwdriver Later,

It Looks and Sounds and Feels Like Job's a Good'Un coolthumbup

Jubilee Clip on Fat Hose from PAS Reservoir was Not Tightened Fully eek

Thanks Guys clap
Result. biggrin