275/35x20 0n rear VXR8
275/35x20 0n rear VXR8
Author
Discussion

Sarge 4x4

Original Poster:

2,371 posts

236 months

Monday 17th February 2014
quotequote all
Anyone running 275/35x20 on the rear of their VXR8 ? If so any rubbing on standard height ?

The Hofff

255 posts

202 months

Monday 17th February 2014
quotequote all
I run 295/30/20 on a lowered VXR8 any they rubbed on heavy cornering before I rolled the arches a little, I will be changing to a 285/30 in the summer as the 295 will still rub with rear passengers and a bump in the road.

A 295 at 30 profile is a tyre height of 88.5
A 275 at 35 profile is a tyre height of 96.25 (+7.75mm)


As lowering will be in the order of -20mm you have 12.25mm spare. Going on that I would say a 275/35/20 'should' be ok.

Edited by The Hofff on Monday 17th February 10:27

Gary H 2008

3,507 posts

220 months

Monday 17th February 2014
quotequote all
I'm running a 275/30/20 (35 profle up front) and even with the arches rolled only a tyre with a sloping tyre wall will clear. But then I am running a 10" wide rear wheel.
Will probably go 265/30 next time as the 452's I'm running are notoriously narrow.

Vxr8Girl

207 posts

171 months

Monday 17th February 2014
quotequote all
I'm running 275/30/20 ' s on the back at standard ride height with no issues.

Sarge 4x4

Original Poster:

2,371 posts

236 months

Monday 17th February 2014
quotequote all
Thanks for you feed back, what I am trying to find out is "has anyone used 275/35x20 on a standard VXR8 without any suspension or body mods" ? I bet someone must have tried it.

ARAF

20,759 posts

254 months

Monday 17th February 2014
quotequote all
Sarge 4x4 said:
Thanks for you feed back, what I am trying to find out is "has anyone used 275/35x20 on a standard VXR8 without any suspension or body mods" ? I bet someone must have tried it.
The problem is that the number running 20" wheels is fairly low, and a 35 profile is oversized. Not sure whether the bottom spring cup on the suspension leg is close, but I think you need just over 1/2" of extra clearance around the tyre.

What are you trying to achieve?

Sarge 4x4

Original Poster:

2,371 posts

236 months

Monday 17th February 2014
quotequote all
O.K. Thanks for that.

Only way I suppose is to try it, I was hoping someone had which would save me a bit of time.

Only thing I an trying to achieve is to see if they will go as I have a pair in stock.

Wyld Stallyn

2,056 posts

159 months

Monday 17th February 2014
quotequote all
Sarge 4x4 said:
O.K. Thanks for that.

Only way I suppose is to try it, I was hoping someone had which would save me a bit of time.

Only thing I an trying to achieve is to see if they will go as I have a pair in stock.
It's always nice when you have spares in ur er idea shed wink

ARAF

20,759 posts

254 months

Monday 17th February 2014
quotequote all
Sarge 4x4 said:
O.K. Thanks for that.

Only way I suppose is to try it, I was hoping someone had which would save me a bit of time.

Only thing I an trying to achieve is to see if they will go as I have a pair in stock.
Would you have to use a pair of 40 profile tyres on the front, to make sure you don't have a problem with the ESP?

idea You could always hold onto them until Jez gets a Continental, and flog them to him. smile

mik_ok

1,580 posts

272 months

Monday 17th February 2014
quotequote all
ARAF said:
Would you have to use a pair of 40 profile tyres on the front, to make sure you don't have a problem with the ESP?

)
I suspect it'll cause the ESP to freak out too Andy.