New Here after advice after a Rolling Road
Discussion
someone correct me if wrong but there can be issues with the LS2 auto on dynos locking up. I know Roger (Monkfish) was fiddling with his to get the lock up working at the last dyno day.
O/P don't worry about figures, you only know how well your car is performing when up against others of the same make on the same dyno on the same day but a copy of your print out would be good.
Also different dynos calculate differently, we tend to use DynoDynamics on this forum as the benchmark as that's what we all tend to run on
O/P don't worry about figures, you only know how well your car is performing when up against others of the same make on the same dyno on the same day but a copy of your print out would be good.
Also different dynos calculate differently, we tend to use DynoDynamics on this forum as the benchmark as that's what we all tend to run on
k14kyy said:
Paul put 2 graphs up I think mate 1 is bhp one is whp think Pauls was 440bhp on dyno run but im sure its in his post,,, ill get my graphs scanned now
Fair enough. 
If everyone on the day had low readings, then I wouldn't be worried by yours. I'm guessing it felt fine before, and feels fine now, so nothing has changed. The dyno is a comparison tool, and dyno shootouts are just a bit of fun.
As for how to get the best reading from an auto, you'll have to speak with Monkfish, as they were in the car when ours was run at the last SRR.
Forget FWHP number its meaningless.
The rwhp is only slightly less so without others for a relative measure.
I cant see the rwhp one as its gone.
But the curves look ok, where is your AFR graph?
Nobody would be able to make much comment on numbers.
Comment is only really valid on curve shape and AFR. See Pah's thread.
Dyno numbers get fudged all the time so disregard them unless you get back to back comparo with others or different mods on the same dyno.
Its not the absolute number that counts but the delta.
The rwhp is only slightly less so without others for a relative measure.
I cant see the rwhp one as its gone.
But the curves look ok, where is your AFR graph?
Nobody would be able to make much comment on numbers.
Comment is only really valid on curve shape and AFR. See Pah's thread.
Dyno numbers get fudged all the time so disregard them unless you get back to back comparo with others or different mods on the same dyno.
Its not the absolute number that counts but the delta.
Vixpy1 said:
pah250 said:
jonnM said:
It's about 40 bhp below GM's claim for the LS2 (in the VXR8). Pah250 was down a fair chunk as well, maybe it's just a pessimistic dyno?
Mine had winter tyres on at the time. I'm told this will zap around 20bhp from my figure.

Good news on the new unit front.

ARAF said:
Vixpy1 said:
pah250 said:
jonnM said:
It's about 40 bhp below GM's claim for the LS2 (in the VXR8). Pah250 was down a fair chunk as well, maybe it's just a pessimistic dyno?
Mine had winter tyres on at the time. I'm told this will zap around 20bhp from my figure.

Good news on the new unit front.

Its with the solicitors at the moment, fingers crossed I hope to be in by end of march.Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff


