Top mount & bearing replacement - torque settings
Top mount & bearing replacement - torque settings
Author
Discussion

vaux2

Original Poster:

73 posts

186 months

Monday 24th February 2014
quotequote all
Hi,

Just received my new top mounts and bearings from MF for my monaro but can't seem to find the correct torque settings anywhere on here. I guess i'll need for the drop links, top mount and strut to hub bolts.

Does anyone happen to know what they are or could point me in the general direction of where to find them?


Thanks,

Iain

breizhpierrot

183 posts

169 months

Monday 24th February 2014
quotequote all
for a 2004 pontiac GTO

Control Arm Ball Joint Stud to Knuckle Nut
60 N·m
44 lb ft

Control Arm Rod Insulator Bushing to Front Frame Nut
23 N·m
17 lb ft

Control Arm Rod to Control Arm Insulator Bushing Nut
148 N·m
109 lb ft

Control Arm Rod to Control Arm Nut
103 N·m
76 lb ft

Control Arm to Front Frame Nut
98 N·m
72 lb ft

Front Suspension Support Brace to Body Nut
30 N·m
22 lb ft

Hub to Knuckle Allen Bolt
108 N·m
80 lb ft

Outer Tie Rod End Ball Stud to Steering Knuckle Nut
68 N·m
50 lb ft

Stabilizer Shaft Insulator Bracket to Front Frame Nut
27 N·m
20 lb ft

Stabilizer Shaft Link Lower Stud to Stabilizer Shaft Nut
50 N·m
37 lb ft

Stabilizer Shaft Link Upper Stud to Strut Bracket Nut
16 N·m
12 lb ft

Strut Rod Shaft to Strut Mount Nut
78 N·m
58 lb ft

Strut to Body Nut
55 N·m
41 lb ft

Strut to Knuckle Nut and Bolt

First Pass
85 N·m
63 lb ft

Second Pass
100 N·m
74 lb ft

Third Pass
90°


vaux2

Original Poster:

73 posts

186 months

Friday 28th February 2014
quotequote all
Hi, sorry for the late reply, been stuck away with work on a rig with internet slower that 90's dial-up!

Thanks a lot for looking out theose torques for me, planning on getting it done this weekend smile

Iain