Headers and weight
Author
Discussion

SturdyHSV

Original Poster:

10,443 posts

198 months

Tuesday 4th March 2014
quotequote all
Whenever looking at stuff about weight reduction, the septics seem to think that changing headers / exhaust drops a few pounds here and there.

Are the stock manifolds that heavy? Presumably the cats are noticeably heavier? The stock exhaust system was also presumably made from pig iron, and contains lots of big silencers, has anyone measured what they weigh compared to a wortec system?

Anyone have any idea what AAS mid length headers and their sports cats weigh?

Just curious really, I know it's considered pointless thinking about weight with our cars and instead just make more power, but every little helps and all that, plus weight distribution can't be a bad thing to consider? Admittedly there's a lot more weight to dump off the back than the front which doesn't help things...

JoyCV8

235 posts

175 months

Tuesday 4th March 2014
quotequote all
I should be fitting Wortec headers & cats (CV8) in the next few weeks & wondered the same. I`ve only got some bathroom scales to compare the weights but I'll report back when done.

KMud

2,924 posts

187 months

Tuesday 4th March 2014
quotequote all
The cast OE headers are pretty weighty. I can't remember what the AAS headers felt like in my hands, but the cats aren't particularly heavy (nor were the OE ones). It's all pretty negligible to be honest.

Relocating the battery away from the front end has to be more significant.

SturdyHSV

Original Poster:

10,443 posts

198 months

Tuesday 4th March 2014
quotequote all
Mmm, I can't imagine it'd be more than a couple of kilos or something, but then Lamborghini will charge you £30,000 to drop 50kg from a Gallardo so...

It's always bemused me somewhat that the driving gods in magazines can remember so clearly how a Gallardo (for example) felt when they drove it for a few hours 3 years ago, that they can feel how much sharper the car is with the 50kg weight difference.

Presumably they must really enjoy their cars when they're low on fuel as they're clearly so much better!

Or is it just that they like driving Lambos so say nice things about them? hehe

SturdyHSV

Original Poster:

10,443 posts

198 months

Tuesday 4th March 2014
quotequote all
KMud said:
Relocating the battery away from the front end has to be more significant.
Done that, and at direct odds to my previous sarcastic post, I feel like there's a bit of a difference biglaugh

KMud

2,924 posts

187 months

Tuesday 4th March 2014
quotequote all
SturdyHSV said:
Done that, and at direct odds to my previous sarcastic post, I feel like there's a bit of a difference biglaugh
It's on my list, got to use that big boot for something!

Monaro5.7

7,337 posts

210 months

Tuesday 4th March 2014
quotequote all
Mind AAS could do you headers in Titanium to drop weight wink

SturdyHSV

Original Poster:

10,443 posts

198 months

Tuesday 4th March 2014
quotequote all
Monaro5.7 said:
Mind AAS could do you headers in Titanium to drop weight wink
Mmm, I'd certainly drop a few kilos from my wallet hehe

SturdyHSV

Original Poster:

10,443 posts

198 months

Tuesday 4th March 2014
quotequote all
KMud said:
It's on my list, got to use that big boot for something!
I went for the ultimate lightweight option, an AA membership and sticking it in here. No big boot you see, got to do what you can!



I got a mahoosive great Odyssey AGM battery to try and stop from loosing any weight off the rear and make sure I had no starting issues.

That beast weighs 22kg and it cranks better now than it did with the stock battery up the front hehe

KMud

2,924 posts

187 months

Tuesday 4th March 2014
quotequote all
Looks good - I've not decided on whether to go:
a) no spare
b) space-saver
c) full-sized spare (got 5 of the pro race alloys)

scratchchin

SturdyHSV

Original Poster:

10,443 posts

198 months

Tuesday 4th March 2014
quotequote all
KMud said:
Looks good - I've not decided on whether to go:
a) no spare + a can of something to get you home? Or a repair kit + compressor?

scratchchin
There's some good puncture repair kits on ebay that I've used and they work perfectly. I may even have one in one of my tyres now, I honestly can't remember.

It comes as a kit with about 5 of the thread things you mash into the hole with the little prong tool. Only brown trousers bit is you have to make the hole big enough first so you have a little hacking tool, very much point of no return there!

KMud

2,924 posts

187 months

Tuesday 4th March 2014
quotequote all
SturdyHSV said:
There's some good puncture repair kits on ebay that I've used and they work perfectly. I may even have one in one of my tyres now, I honestly can't remember.

It comes as a kit with about 5 of the thread things you mash into the hole with the little prong tool. Only brown trousers bit is you have to make the hole big enough first so you have a little hacking tool, very much point of no return there!
Yeah, got some goop, although honestly I don't like carrying it around just in case it develops a leak! I'll start mocking things up in my boot at some point and see if I can tolerate the full-sized spare whilst retaining some practicality, but the VXR space-saver is probably the tidiest compromise.

SturdyHSV

Original Poster:

10,443 posts

198 months

Tuesday 4th March 2014
quotequote all
KMud said:
Yeah, got some goop, although honestly I don't like carrying it around just in case it develops a leak! I'll start mocking things up in my boot at some point and see if I can tolerate the full-sized spare whilst retaining some practicality, but the VXR space-saver is probably the tidiest compromise.
You're welcome to have my space saver if you go that route mate, PM me as and when (it's a 19" wheel).

KMud

2,924 posts

187 months

Tuesday 4th March 2014
quotequote all
SturdyHSV said:
You're welcome to have my space saver if you go that route mate, PM me as and when (it's a 19" wheel).
That would be great smile

jameshsv

5,844 posts

191 months

Tuesday 4th March 2014
quotequote all
SturdyHSV said:
There's some good puncture repair kits on ebay that I've used and they work perfectly. I may even have one in one of my tyres now, I honestly can't remember.

It comes as a kit with about 5 of the thread things you mash into the hole with the little prong tool. Only brown trousers bit is you have to make the hole big enough first so you have a little hacking tool, very much point of no return there!
They do a good job but ilegal to plug tyres me thinks.

leigh1050

2,465 posts

196 months

Tuesday 4th March 2014
quotequote all
jameshsv said:
SturdyHSV said:
There's some good puncture repair kits on ebay that I've used and they work perfectly. I may even have one in one of my tyres now, I honestly can't remember.

It comes as a kit with about 5 of the thread things you mash into the hole with the little prong tool. Only brown trousers bit is you have to make the hole big enough first so you have a little hacking tool, very much point of no return there!
They do a good job but ilegal to plug tyres me thinks.
Only if it's close to the sidewall,ok if it's near the center of the tread.

jameshsv

5,844 posts

191 months

Tuesday 4th March 2014
quotequote all
SturdyHSV said:
There's some good puncture repair kits on ebay that I've used and they work perfectly. I may even have one in one of my tyres now, I honestly can't remember.

It comes as a kit with about 5 of the thread things you mash into the hole with the little prong tool. Only brown trousers bit is you have to make the hole big enough first so you have a little hacking tool, very much point of no return there!
They do a good job but ilegal to plug tyres me thinks.

richie slow

7,570 posts

195 months

Tuesday 4th March 2014
quotequote all
SturdyHSV said:
Mmm, I'd certainly drop a few kilos from my waistline hehe
EFA ^^^

bimbleuk

156 posts

256 months

Wednesday 5th March 2014
quotequote all
I'm afraid my answer was to take the right engine and put it in the wrong chassis. Instant 450 kg weight loss! Even I can notice that one.

JoyCV8

235 posts

175 months

Friday 4th April 2014
quotequote all
If anyone was interested - (weighed on stone age postal scales)

Std LS1 manifold - 6.5kg
Std LS1 cat pipe - 5.4kg

Wortec manifold - 6.1kg
Wortec cat pipe - 3.1kg

Which makes it an expensive way to save 5.4 kgs hehe