Monaro rear anti roll bar
Monaro rear anti roll bar
Author
Discussion

mfp4073

Original Poster:

2,111 posts

205 months

Saturday 8th March 2014
quotequote all
I have just changed the rear anti roll bar drop link bushes without any problems!
However the two large bushes that attach the roll bar to the vehicle are a problem.
This is due to having hands like shovels and restricted access to the 13mm retaining bolt.
The fun started when I put the C- clamp over the new bush and tried to get the bolts to bite back into the captive nut. There was no way I could do it.
Is there an easy way to bolt this all back together?

Thanks again John

gsd2000

11,515 posts

214 months

Saturday 8th March 2014
quotequote all
Did you lower the rear subframe?

If not undo the drop links and unplug the abs sensors, then undo the 4 bolts on the rear diff mount and lower.

That should give you plenty more space to play with

mfp4073

Original Poster:

2,111 posts

205 months

Saturday 8th March 2014
quotequote all
No I did not lower the rear sub frame.....I will try that.
I hate to ask but can you talk me through it, or is that all there is?

Regards john


gsd2000

11,515 posts

214 months

Saturday 8th March 2014
quotequote all
Stick the rear of the car on axle stands

Undo the rear anti roll bar drop links

Undo the cables from the abs sensors which are mounted on the diff

Support the diff with a jack

Undo the 4 bolts where the rear of the diff mounts to the car. I think they are 10mm

Then double check that nothing will catch and slowly lower

mfp4073

Original Poster:

2,111 posts

205 months

Saturday 8th March 2014
quotequote all
gsd2000,

Thanks for that...Big Time!
I've spent all day trying to sort out a job which I thought would take an hour and a half!!!!
Anyway on my next days off I'll finish it all off.......thank God for this forum.

Thanks again gsd2000 you are a Gent.

Regards John

Behold81

2,931 posts

200 months

Saturday 8th March 2014
quotequote all
Yeah lots of its cars need this approach. Easy to do.