How to make my v8 quieter????
How to make my v8 quieter????
Author
Discussion

Behold81

Original Poster:

2,931 posts

200 months

Thursday 13th March 2014
quotequote all
Ok I'm not talking about the exhaust note. I'm talking inside the car. The new headers make a bit of noise and I have always heard more road noise than I would like.

I'm thinking dyno matting would do the trick.

Anyone done this and is there a cheaper product? Is it worth it?

Thanks.

ARAF

20,759 posts

254 months

Thursday 13th March 2014
quotequote all
Gary H did his VXR8 very thoroughly.

monkfish1

12,522 posts

255 months

Thursday 13th March 2014
quotequote all
Behold81 said:
Ok I'm not talking about the exhaust note. I'm talking inside the car. The new headers make a bit of noise and I have always heard more road noise than I would like.

I'm thinking dyno matting would do the trick.

Anyone done this and is there a cheaper product? Is it worth it?

Thanks.
Check your gearstick gaiter, not the leather one, the rubber one under it.

Tattooboy

7,946 posts

209 months

Thursday 13th March 2014
quotequote all
Behold81 said:
is there a cheaper product?

Thanks.
Ear plugs thumbup

wozzza

404 posts

162 months

Thursday 13th March 2014
quotequote all
Dynomat is not really meant to get rid of road noise. It is more for adding mass to stop panel vibrations.
What you will need is mass loaded vinyl for road noise. Generally applied over a deadened panel with usually a foam layer between.

Quite a lot of weight to add, while deadening (dynomat you can do by using strips on panels) the mass loaded vinyl has to be applied with no gaps ideally.

Loads of cheaper alternatives to dynamat though, also best to buy bulk packs. Same with foam can get that cheaper than using the audio specific stuff.

wozzza

404 posts

162 months

Thursday 13th March 2014
quotequote all
Dynomat is not really meant to get rid of road noise. It is more for adding mass to stop panel vibrations.
What you will need is mass loaded vinyl for road noise. Generally applied over a deadened panel with usually a foam layer between.

Quite a lot of weight to add, while deadening (dynomat you can do by using strips on panels) the mass loaded vinyl has to be applied with no gaps ideally.

Loads of cheaper alternatives to dynamat though, also best to buy bulk packs. Same with foam can get that cheaper than using the audio specific stuff.

Wyld Stallyn

2,056 posts

159 months

Thursday 13th March 2014
quotequote all
wozzza said:
Dynomat is not really meant to get rid of road noise. It is more for adding mass to stop panel vibrations.
What you will need is mass loaded vinyl for road noise. Generally applied over a deadened panel with usually a foam layer between.

Quite a lot of weight to add, while deadening (dynomat you can do by using strips on panels) the mass loaded vinyl has to be applied with no gaps ideally.

Loads of cheaper alternatives to dynamat though, also best to buy bulk packs. Same with foam can get that cheaper than using the audio specific stuff.
Mass Stops Sound yes - Lead is Very Effective but...

Lower Frequencies are the most Difficult to Attenuate

Gaps let the Flavour Flood In

Having a new rubber gaiter fitted to my 'Ro whilst the 'box is out.

vxr2010

2,629 posts

190 months

Friday 14th March 2014
quotequote all
On vxr8 I bought 25£ worth of stick on sound deadening on eBay , I did both front foot wells and central tunnel as much as I could it noticeably less noisy

SturdyHSV

10,443 posts

198 months

Friday 14th March 2014
quotequote all
My Monaro will be noisier inside than most I'd imagine as far as external sound sources go, and I still find it a remarkably sedate motorway cruiser considering the amount of bloody noise it makes the rest of the time hehe

I'd agree to look around the gearstick area, you've basically got a bit of leather, a bit of felt, a bit of rubber and then you're outside on the gearbox. Swapping my gearstick over, leaving even just the felt bit out and having a gap around the rubber ring that sits around the shaft (quiet at the back there) made a surprising difference that I later plugged up.

Chucking the stereo even made an appreciable difference, it's surprising really.

How quiet you get it I guess depends on how much weight you're willing to add, it's not something I've considered to be honest, not beyond the fact I don't want to take any of the sound deadening out for risk of it going very wrong on trips to Le Mans etc.

Gary H 2008

3,507 posts

220 months

Friday 14th March 2014
quotequote all
Behold81 said:
Ok I'm not talking about the exhaust note. I'm talking inside the car. The new headers make a bit of noise and I have always heard more road noise than I would like.

I'm thinking dyno matting would do the trick.

Anyone done this and is there a cheaper product? Is it worth it?

Thanks.
18 Kilos of the stuff (Mass-load bitumen based adhesive pads with a layer of close-foam on top (or Cloud 9 underlay in easy flat areas) and teh car is quieter than most Mercs or Audis from the inside.

https://www.facebook.com/media/set/?set=a.40941492...

Behold81

Original Poster:

2,931 posts

200 months

Friday 14th March 2014
quotequote all
My rubber gater is in tact. The noise is mainly the passengers side well. I get a lot of noise from the header and the charger bleeding in the bulkhead and floor. If I put towels in the footwell it's a quieter. But having it much quieter would be nice.

I'll look at your FB page later Gary. Might need to ask a few questions. Could offset the spare wheel for quietness!!!

Gary H 2008

3,507 posts

220 months

Friday 14th March 2014
quotequote all
No problem bud, ask away (normally get a quicker response through FB)

Wyld Stallyn

2,056 posts

159 months

Friday 14th March 2014
quotequote all
SturdyHSV said:
Chucking the stereo even made an appreciable difference, it's surprising really.
Any Mass will attenuate sound, and any gaps will let sound through -

Removing the Stereo ie Removing Mass and Creating a Gap even if you fitted a facia plate will make a noticeable difference.

Some of the bitumen sheet products work rather well thumbup I've also heard good results from good ole fashioned tar roofing sealant when applied liberally.

You shoulda seen some of the lengths we went to when doing the Recording Studios and the Anechoic Chamber eek

wozzza

404 posts

162 months

Friday 14th March 2014
quotequote all
Only issue with some of the non car specific products is they can melt a bit easier. Can be a bugger when parked in the sun during summer.

007 VXR

64,187 posts

218 months

Friday 14th March 2014
quotequote all
A side note, After i had my ACT clutch fitted, I could not belive haw much quieter the noise inside was.(coming from the gear lever area) Big diffrence smile
Have sound deadening in my doors and rear side panels and under rear seat as well..
(cant remember which make was used)

Behold81

Original Poster:

2,931 posts

200 months

Saturday 15th March 2014
quotequote all
stevieturbo said:
Thanks Stevie!!!! I'll buy them for the wife!!!


SturdyHSV

10,443 posts

198 months

Saturday 15th March 2014
quotequote all
Behold81 said:
Thanks Stevie!!!! I'll buy them for the wife!!!
Or buy them for yourself, and she'll never complain about anything ever again wink

Behold81

Original Poster:

2,931 posts

200 months

Saturday 15th March 2014
quotequote all
SturdyHSV said:
Or buy them for yourself, and she'll never complain about anything ever again wink
Ha ha ha. I like your thinking!