Monaro stereo help?
Monaro stereo help?
Author
Discussion

KMud

Original Poster:

2,924 posts

187 months

Sunday 16th March 2014
quotequote all
I'm looking to swap out my stereo just because I'm a bit sick of the radio not retuning itself as I roam, and I figure if I'm bothering to upgrade I guess I want the option of fitting a reversing camera and play DVDs for the little one. Is the Kenwood DDX-3023 a goer? I'm struggling to confirm SWI-JACK compatibility on that one.

I would really like navigation, but seems to be expensive. I have an Android phone too which I could possibly hook up(?), but everything seems to be iPhone biased.

I've got ferret's radio brackets (smile), and a SWI-JACK and ISO connectors incoming, anything else? Yet to order a bezel. May do speakers at a later date, but not very bothered to be honest.

SturdyHSV

10,443 posts

198 months

Sunday 16th March 2014
quotequote all
The speakers are 2 Ohm for reference, and the rear subs are just run off the rest speakers.

Can't help much with the head unit stuff, sorry frown

KMud

Original Poster:

2,924 posts

187 months

Sunday 16th March 2014
quotequote all
Is 2 ohm a problem? Bit dense on stereos!

KMud

Original Poster:

2,924 posts

187 months

Sunday 16th March 2014
quotequote all
Hmm, so maybe the DDX-3023 is only 4-8 ohm speaker impedance...

KMud

Original Poster:

2,924 posts

187 months

Sunday 16th March 2014
quotequote all
I'll continue talking to myself. Please nobody help! wink

Currently:
Kenwood DDX-3023 head unit
Kicker ES65 rear coaxes
Kicker ES652 doors + tweeters
Subs and sub-amp ??? 8" following ferret's lead maybe, since cheaper, better, and if I'm pissing around anyway...

e: not worth a bump, but ferret to the rescue smile

Edited by KMud on Sunday 16th March 20:58

S800VXR

5,877 posts

231 months

Sunday 16th March 2014
quotequote all
Basically rip out all the stereo and start again. New speakers, wiring, crossovers etc etc. it's allot of work to do properly. I did all mine minus the head unit as sold it so never got to hear the result. Used Vibe kit throughout by the way.

KMud

Original Poster:

2,924 posts

187 months

Sunday 16th March 2014
quotequote all
Went for:

Kenwood DDX-3023
Kicker KS65.2
Kicker ES65

Will see how it sounds, but it's probably up to Radio 2/4, and the occasional bit of 70's/80's metal. Subs later maybe.

S800VXR

5,877 posts

231 months

Sunday 16th March 2014
quotequote all
I put small subs in the rear side panels. Loads of room in there and can be built into a sealed units easily enough.

KMud

Original Poster:

2,924 posts

187 months

Sunday 16th March 2014
quotequote all
Will scope that out whilst I'm in there thumbup

SturdyHSV

10,443 posts

198 months

Monday 17th March 2014
quotequote all
I'd be curious to see what those with an audio ear think to my 'set-up', you'll have to have a listen in April if you're coming to the V8UK event on the 13th?

I might turn the amp up for the subs before then, everyone says that makes a nice little difference.

Given mine cost, oooh about £60 including the fascia, connectors, 'stereo', switch, the whole lot, I bet it'll make people cry with the poor quality biglaugh

For my ears though, it's fine.

KMud

Original Poster:

2,924 posts

187 months

Monday 17th March 2014
quotequote all
Should see you there, you should try mine to compare smile

I should do the subs at a later date I suppose, but will see how it sounds with the above bits, and sort out some more pressing mechanical bits first.

SturdyHSV

10,443 posts

198 months

Monday 17th March 2014
quotequote all
KMud said:
Should see you there, you should try mine to compare smile

I should do the subs at a later date I suppose, but will see how it sounds with the above bits, and sort out some more pressing mechanical bits first.
Yeah that'd be good, although then it can never be unheard, and I may end up unhappy! Ignorance is bliss wink

KMud

Original Poster:

2,924 posts

187 months

Monday 17th March 2014
quotequote all
Indeed...although good tweeters to cut through the noise of a full stainless exhaust system may be a necessity!

DuncanDisorderly

444 posts

192 months

Monday 17th March 2014
quotequote all
Fitted a Kenwood DNX9240 into mine with no problems, just a straight swap. Sure the speakers could be improved but it works OK. Obviously you lose the steering wheel controls without another bit of kit.

KMud

Original Poster:

2,924 posts

187 months

Monday 17th March 2014
quotequote all
DuncanDisorderly said:
Fitted a Kenwood DNX9240 into mine with no problems, just a straight swap. Sure the speakers could be improved but it works OK. Obviously you lose the steering wheel controls without another bit of kit.
Got the SWI JACK coming, and looks like a doddle to install smile

wozzza

404 posts

162 months

Tuesday 18th March 2014
quotequote all
Got a full install coming in April once I have free time.

Trying to work out if I stay 2 way up front or do 3 way. But got loads of kit here ready to go in, just need to order some 0 AWG cabling. The run I have is likely going to be too small for the Ro. Those who have run cabling to the boot, how much have you needed with a tidy hidden run?

Also any decent places to get 0AWG through as with it being quite thick cable it can be a bit of a bugger at times on some cars. Not ripped the interior out yet to find out where to go.

KMud

Original Poster:

2,924 posts

187 months

Tuesday 18th March 2014
quotequote all
I'm thinking subs and battery relocation at the same time...;)

SturdyHSV

10,443 posts

198 months

Tuesday 18th March 2014
quotequote all
KMud said:
I'm thinking subs and battery relocation at the same time...;)
What battery / cable you using? Curse you and your big boot wink

KMud

Original Poster:

2,924 posts

187 months

Tuesday 18th March 2014
quotequote all
Haven't got that far yet, but the jobs seem to fall naturally together.

KMud

Original Poster:

2,924 posts

187 months

Sunday 6th April 2014
quotequote all
Just for (as the Septics say) closure...sorry for lack of photos.

The Kicker speakers I ordered are now discontinued, so I ended up with Pioneers (TS-A1723I and TS-A172CI). The components fit in the door speaker pods perfectly, and the tweeters fit easily although I just stuck them to the tweeter brackets (no threaded hole on the back like the OE tweeters). The rears was more of an ordeal, they did not fit. Rather than make an MDF spacer, I just de-riveted the panels, took them out of the car, and tin-snipped them out a hair (picture here). Hardest part of all of this was getting the wires through the rubber channels into the doors, which I did by passing a cable-tie down through from inside the body into the door, daisy-chaining on a second cable tie to hold the cables, then massaging them back up through. I used the PAC SWI-RC for the steering wheel controls.

I used ferret's metal radio brackets, they were the business smile Here's my cheapie Metra bezel, sanded and painted with Halfords satin black, which I think was a pretty good match. Big thanks to ferret for pointers throughout, the bulk of the work added up to a solid day (done on my Larry). It was definitely a worthwhile exercise - even though I mostly just listen to talk radio on long journeys!


(click to embiggen)