Stainless brake hoses
Stainless brake hoses
Author
Discussion

VinceM

Original Poster:

1,906 posts

169 months

Tuesday 18th March 2014
quotequote all
What's the current thinking on stainless brake hoses? Worth it? Or waste of money? Any particular brands good for the Monaro (with APs?).

Thanks.

snowwolf

11,503 posts

206 months

Tuesday 18th March 2014
quotequote all
Venhill make good hoses, have fitted them to my bike, will be getting some for R8 when I do calipers, some on eBay

Codswallop

5,260 posts

225 months

Tuesday 18th March 2014
quotequote all
I've been told by those who've had them fitted that they take away some of the deadness out of CV8 brakes. Will probably go braided myself when the time comes to replace my current hoses.

snowwolf

11,503 posts

206 months

Tuesday 18th March 2014
quotequote all
I sometimes wonder if it is the hoses that make the difference felt when hoses are changed as the fluid is changed at the same time ?

Dee Tee

543 posts

183 months

Tuesday 18th March 2014
quotequote all
Had Braided Lines on all of my Bikes for years. I had them put on my GTS when I had the Pipe, Cold Air Intake and Quick Shift fitted. Any better ? Probably but DEFINITELY not worse.

leigh1050

2,465 posts

196 months

Tuesday 18th March 2014
quotequote all
I've had braided hoses on bikes before and they make a lot of difference.
Had them on my r8 for a couple of years now.

Edited by leigh1050 on Tuesday 18th March 23:16

ARAF

20,759 posts

254 months

Wednesday 19th March 2014
quotequote all
I always replace them on bikes, one at a time at abou two week intervals, or there's a possiblity that you may grab too much brake. They really do make a difference in feel, and with the greater mass of a car you may not realise so easily but it must do the same.

VinceM

Original Poster:

1,906 posts

169 months

Wednesday 19th March 2014
quotequote all
Good then. Any particular brands for the Ro?

gsd2000

11,515 posts

214 months

Wednesday 19th March 2014
quotequote all
ive got the russell braided hoses on mine

I think i paid £115 for them, but i did order 5 or 6 sets from the states at the time

ARAF

20,759 posts

254 months

Wednesday 19th March 2014
quotequote all
VinceM said:
Good then. Any particular brands for the Ro?
On a bike, it's not so critical, but on a car, whatever you get, make sure that they are shrink-wrapped in an outer plastic sheath. It stops grit from getting between the braiding and the inner hose, causing premature wear or failure.

Goodrich or Earls are the bigger names here.

FluffyCV8

316 posts

182 months

Thursday 20th March 2014
quotequote all
I made my own up with hose and fittings bought from 'Think Automotive' who I've been using for 30 years, proper Aeroquip not some cheap copy.

maxmc2

2,063 posts

216 months

Thursday 20th March 2014
quotequote all
Monkfish do a set on their website.

VinceM

Original Poster:

1,906 posts

169 months

Thursday 20th March 2014
quotequote all
ARAF said:
Earls are the bigger names here.
This is the brand of my PAS fluid cooler on my Ro.... blabla