Monaro interior mods - then/now
Monaro interior mods - then/now
Author
Discussion

KMud

Original Poster:

2,924 posts

187 months

Thursday 20th March 2014
quotequote all
Not quite the Gary H school of interior modding here, but I wasn't happy with my wideband install and have been tinkering. For such a small change I think it's really brightened up the inside of the CV8, which is otherwise a bit like Disaster Area's spaceship (Hitchhiker's wink).



Differences between the 2 pics:
  • Wideband gauge in VXR gauge pod, associated trim bits
  • VXR gear knob
  • new steering wheel to remove bobbly silver spoke
New stereo on route smile

SturdyHSV

10,443 posts

198 months

Thursday 20th March 2014
quotequote all
Made me want to take a picture of mine now!

I may nip out to it later on just to contribute, won't be able to get such a good photo though, very nice!

Also, there look to have been some significant exterior mods too, wall's moved and everything hehe

KMud

Original Poster:

2,924 posts

187 months

Thursday 20th March 2014
quotequote all
SturdyHSV said:
Made me want to take a picture of mine now!

I may nip out to it later on just to contribute, won't be able to get such a good photo though, very nice!

Also, there look to have been some significant exterior mods too, wall's moved and everything hehe
New house, garage pending smile

Yours definitely deserves a decent photo. Can do it at V8UK for you. Was thinking of yours when I had the airbag in my hand this morning...

Tattooboy

7,946 posts

209 months

Thursday 20th March 2014
quotequote all
KMud said:
SturdyHSV said:
Made me want to take a picture of mine now!

I may nip out to it later on just to contribute, won't be able to get such a good photo though, very nice!

Also, there look to have been some significant exterior mods too, wall's moved and everything hehe
New house, garage pending smile

Yours definitely deserves a decent photo. Can do it at V8UK for you. Was thinking of you when I had my hairybag in my hand this morning...
Too much info !! yikes

Mods look good smile

KMud

Original Poster:

2,924 posts

187 months

Thursday 20th March 2014
quotequote all
Tattooboy said:
Too much info !! yikes

Mods look good smile
I was grateful when it didn't explode smile

EmmaJ

4,525 posts

177 months

Thursday 20th March 2014
quotequote all
KMud said:
Tattooboy said:
Too much info !! yikes

Mods look good smile
I was grateful when it didn't explode smile
Air bag going off in slow mo

KMud

Original Poster:

2,924 posts

187 months

Thursday 20th March 2014
quotequote all
EmmaJ said:
Just like my hairybag smile

fastbikes76

2,450 posts

153 months

Thursday 20th March 2014
quotequote all
EmmaJ said:
KMud said:
Tattooboy said:
Too much info !! yikes

Mods look good smile
I was grateful when it didn't explode smile
Air bag going off in slow mo
You wouldnt want it going off in your hand


https://www.youtube.com/watch?v=8XzgwmMqHtg

yikes

gsd2000

11,515 posts

214 months

Thursday 20th March 2014
quotequote all
your interior mods are very similar to me smile

Im looking into a twin pillar pod for AFR and a scangauge, then mount oil pressure and oil temp gauges in the centre pod

SturdyHSV

10,443 posts

198 months

Thursday 20th March 2014
quotequote all
KMud said:
New house, garage pending smile

Yours definitely deserves a decent photo. Can do it at V8UK for you.
That would be awesome smile

Here's my shot, in the rain just now smile

Plenty more to be done to the stereo slot, very much make do at the mo'


Gary H 2008

3,507 posts

220 months

Thursday 20th March 2014
quotequote all
KMud said:
Not quite the Gary H school of interior modding here, but I wasn't happy with my wideband install and have been tinkering. For such a small change I think it's really brightened up the inside of the CV8, which is otherwise a bit like Disaster Area's spaceship (Hitchhiker's wink).



Differences between the 2 pics:
  • Wideband gauge in VXR gauge pod, associated trim bits
  • VXR gear knob
  • new steering wheel to remove bobbly silver spoke
New stereo on route smile
Nicely done smile

KMud

Original Poster:

2,924 posts

187 months

Thursday 20th March 2014
quotequote all
gsd2000 said:
your interior mods are very similar to me smile

Im looking into a twin pillar pod for AFR and a scangauge, then mount oil pressure and oil temp gauges in the centre pod
Got a pic of how it stands? Only really seen the outside of yours. I plan to make my own combined oil temp/pressure for the other gauge hole (A-pillar thick enough already!).

SturdyHSV said:
That would be awesome smile

Here's my shot, in the rain just now smile

Plenty more to be done to the stereo slot, very much make do at the mo'

Seats still very much on my list smile

VinceM

1,906 posts

169 months

Thursday 20th March 2014
quotequote all
I rather like that...

MyM8V8

9,468 posts

226 months

Saturday 22nd March 2014
quotequote all
KMud said:
gsd2000 said:
your interior mods are very similar to me smile

Im looking into a twin pillar pod for AFR and a scangauge, then mount oil pressure and oil temp gauges in the centre pod
Got a pic of how it stands? Only really seen the outside of yours. I plan to make my own combined oil temp/pressure for the other gauge hole (A-pillar thick enough already!).

SturdyHSV said:
That would be awesome smile

Here's my shot, in the rain just now smile

Plenty more to be done to the stereo slot, very much make do at the mo'

Seats still very much on my list smile
Mmmmmmmmmm?

TheLostProphet

687 posts

163 months

Tuesday 25th March 2014
quotequote all
Quick question for you SturdyHSV. Im going to make an attempt at changing the interior LED lights this weekend as I have a couple of days off. Was just wondering what ones I need to order for the instruments and the footwell ones as well.

SturdyHSV

10,443 posts

198 months

Tuesday 25th March 2014
quotequote all
TheLostProphet said:
Quick question for you SturdyHSV. Im going to make an attempt at changing the interior LED lights this weekend as I have a couple of days off. Was just wondering what ones I need to order for the instruments and the footwell ones as well.
Surface mount LEDs for the blue (original listing I got them from)

http://www.ebay.co.uk/itm/50x-SMD-PLCC-2-3528-Ultr...

Naturally same type of LED, but in different colours wink

For the non surface mount stuff, used these:

http://www.ebay.co.uk/itm/QTY-20-BLUE-LEDs-3500mcd...

Footwell I'd say just get some of those reels of LEDs that are sticky backed, that's what I did, although the 'cool white' is in fact a bit 'chav white' (too blue tinged) so avoid those! I'm going to redo the various interior bulbs with LEDs at some point, must get round to finishing the job properly!

Unless you're very handy with a solder sucker and/or solder braid, you may struggle to get the dash turned around in a couple of days.

I think the whole process took me about 40hours (in total) spread over about 2 weeks, but then I'd not really used a soldering iron before so...

Start on the other simpler stuff (window switches, headlight switch, mode/set buttons etc.) first I'd say and see how you go. The A/C unit is very simple to do (just note the polarity of all of the LEDs) and will give you a feel for doing the surface mount stuff (it's actually quite easy, if fiddly)

I hope you have some fine tweezers.

I have LOADS of pictures, so let me know if you need anything clarifying, even trim removal etc.

thumbup

In fact, here's all the pictures:

http://tinyurl.com/otvkv6f

Should at least mean none of it is a surprise!

Edited by SturdyHSV on Tuesday 25th March 09:44

KMud

Original Poster:

2,924 posts

187 months

Tuesday 25th March 2014
quotequote all
I've done a fair bit of ad-hoc soldering (various locations and gear), and a decent, temperature-controlled soldering iron with a fine tip makes a massive difference. If I were undertaking that amount of work I'd spend £100 or so on a good one.

S60hsv

373 posts

152 months

Tuesday 25th March 2014
quotequote all
SturdyHSV said:
That would be awesome smile

Here's my shot, in the rain just now smile

Plenty more to be done to the stereo slot, very much make do at the mo'

Sick ( in a good way ) ;-)

SturdyHSV

10,443 posts

198 months

Tuesday 25th March 2014
quotequote all
KMud said:
I've done a fair bit of ad-hoc soldering (various locations and gear), and a decent, temperature-controlled soldering iron with a fine tip makes a massive difference. If I were undertaking that amount of work I'd spend £100 or so on a good one.
£100! Wowzers, I spent less than that on the whole job hehe

Fine tip I agree with, think I spent about £35 on the iron, ebay naturally, having the tiny tip really helped.

Oh you'll want a third hand too ( hehe ) for doing the headlight switch at least. That. Took. Hours. Which is why I then got a fine tipped soldering iron, the old P.O.S I was using made that job much harder.

TheLostProphet

687 posts

163 months

Tuesday 25th March 2014
quotequote all
Thanks for all that mate. Just had a look at all the pics you sent they are going to be a great help.

Probably wont get it all done this weekend but if I can get some of the easier ones done and save the dash for another day I will be happy.

Im not bad with a soldering iron so confident I can do the job just going to take me a bit of time.

Whats the deal with the resistors? Do I need to add in new ones?