Monaro ball joints, drop-links, general ignorance
Monaro ball joints, drop-links, general ignorance
Author
Discussion

KMud

Original Poster:

2,924 posts

187 months

Tuesday 25th March 2014
quotequote all
Are ball-joints a common failure point on monaros? The gaiters on both of mine appear to be split and I did both lower arms Dec 2012. Any pointers on where I can get just the ball joints? Also, I've just lowered my car, and am a bit concerned about the drop-links - admittedly I've not done the geometry yet, but am I right thinking there isn't a shorter drop-link substitute?

I'm running Pedders poly bushes on the drop-links and drag struts, but didn't manage to do the ARB - stupid question, but how much difference do the front poly ARB bushes make?

Finally, is this correct for an 04 CV8 with 2/3 of a road response pac?

Front toe: 4-5 mins
Front camber: -50 mins
Front caster: 6 deg 30 mins to 9 deg

Rear toe: 10 mins
Rear camber: -1 deg 41 mins to -25 mins

I am dense on suspension, and am having a bad day frown

Edited by KMud on Wednesday 26th March 08:13

KMud

Original Poster:

2,924 posts

187 months

Tuesday 25th March 2014
quotequote all
On the plus side...



...bit lower, bit bigger brakes smile

ARAF

20,759 posts

254 months

Tuesday 25th March 2014
quotequote all
KMud said:
On the plus side...



...bit lower, bit bigger brakes smile
They fill the wheel better. cool What wheels are they please?

KMud

Original Poster:

2,924 posts

187 months

Tuesday 25th March 2014
quotequote all
ARAF said:
They fill the wheel better. cool What wheels are they please?
Team Dynamics pro race 1.2, a la Gurmeet smile

SturdyHSV

10,443 posts

198 months

Tuesday 25th March 2014
quotequote all
KMud said:
On the plus side...



...bit lower, bit bigger brakes smile
Second picture looks epic. Mine needs lowering, stat.

KMud

Original Poster:

2,924 posts

187 months

Tuesday 25th March 2014
quotequote all
SturdyHSV said:
Second picture looks epic. Mine needs lowering, stat.
Thanks - mine needs tracking, stat! Question is whether I can find somewhere decent to do it and if I can get the ARB bushes in first. Oh, and those bloody ball joints! Quite a pisser.

ARAF

20,759 posts

254 months

Tuesday 25th March 2014
quotequote all
KMud said:
ARAF said:
They fill the wheel better. cool What wheels are they please?
Team Dynamics pro race 1.2, a la Gurmeet smile
Good wheel, but I believe you have to be patient with them. The silver goes well with the black. cool

KMud

Original Poster:

2,924 posts

187 months

Tuesday 25th March 2014
quotequote all
ARAF said:
Good wheel, but I believe you have to be patient with them. The silver goes well with the black. cool
Not half! They kept failing their QA process on the paint too. Cheap and light though, and one of the few alloys I like.

JoyCV8

235 posts

175 months

Tuesday 25th March 2014
quotequote all
KMud said:
if I can get the ARB bushes in first
I didn't have a problem doing these, just required a couple of very long extension bars to get at the bolts from above..

Ref the balljoints its possible to replace the just the boots permitting the joint itself is ok (gonna have to check mine as i'm sure there pedders ones as well).

KMud

Original Poster:

2,924 posts

187 months

Tuesday 25th March 2014
quotequote all
JoyCV8 said:
I didn't have a problem doing these, just required a couple of very long extension bars to get at the bolts from above..

Ref the balljoints its possible to replace the just the boots permitting the joint itself is ok (gonna have to check mine as i'm sure there pedders ones as well).
Thanks - we just ran out of time and all various shades of ill. I did wonder if there was an argument for leaving the poly ARB bushes off for now though, i.e., less understeer. I'll talk to monkfish in the morning, I struggle with the search function on their site.

KMud

Original Poster:

2,924 posts

187 months

Wednesday 26th March 2014
quotequote all
Photos:

https://www.dropbox.com/s/08jrmeq0ljksefn/IMAG1807...
https://www.dropbox.com/s/08jrmeq0ljksefn/IMAG1810...

As stupid as it sounds, I'm still not sure if they're split (same one shown above from 2 different angles). Anyway, it will be on a ramp tomorrow for tracking.

KMud

Original Poster:

2,924 posts

187 months

Thursday 27th March 2014
quotequote all
I've got the car on a ramp now, and both ball joint rubbers are split. But st really, they've only about 15 months/3k miles on them, and will cause grief next mot.