R8 rear lamps issues...
Discussion
OK so yeah... usual suspects
.
I have both rear lamps get slight condensation in them and I also have a faded red reflector in the drivers lamp ??
So how easy are these lamps to heat up and open so i can air them and reseal? Secondly I guess I need to track down a broken lamp unit to find a donor reflector or is there another fix ?
Cheers
Elton

.I have both rear lamps get slight condensation in them and I also have a faded red reflector in the drivers lamp ??
So how easy are these lamps to heat up and open so i can air them and reseal? Secondly I guess I need to track down a broken lamp unit to find a donor reflector or is there another fix ?
Cheers
Elton
ARAF said:
I don't know of anyone that has opened one yet, as they are bloody expensive, if you cock it up.
I would try and find a scrap one first, to practice on.
I wouldn't mind finding a scrap one as I need a reflector any ways.I would try and find a scrap one first, to practice on.
Im pretty confident with stuff like this and regularly open GTO headlamps and tail lamps...whats the worst that could happen eh

fastbikes76 said:
ARAF said:
I don't know of anyone that has opened one yet, as they are bloody expensive, if you cock it up.
I would try and find a scrap one first, to practice on.
I wouldn't mind finding a scrap one as I need a reflector any ways.I would try and find a scrap one first, to practice on.
Im pretty confident with stuff like this and regularly open GTO headlamps and tail lamps...whats the worst that could happen eh


vxr2010 said:
Hi have a look in FAQ I put a post on about how to dry headlights out , try it on your tail lights hope it works
Is that the drilling small holes top and bottom one ? One of them is a brand new lamp fitted July last year..sadly I don't have the invoice too try get it replaced again

If you just want to air out the rear lamps the reverse bulb twists and removes you could then use the hole to blow air through or something. That said i've had mine apart, twice in one case, and after I put them back together they still mist up. The process of removing the back of the lamp housing is largely one of patience you will likely make a bit of a mess of the plastic edge, I had to stick a screwdriver in the gap and twist which mashed the plastic up. Once its back on the car you can't see it so it doesn't bother me.
So both rear lamps are out and I have found the issue..... the sticker that say's 'Made in Taiwan' 


They are both in the airing cupboard however i dont expect anything other than drilling some small holes top and bottom to work permanently. The lamps as stock have a two small breathers already however from my experience with GTo's constant misting lamps this is not enough to equalise the temperature differential between internal and ambient temps.
Also dont expect any miracles from 'New' lights as my brand new light bought from Newbury VX 8 months ago has a 2008 date sticker on it. Crazy thing is the 'New' lamp mists up more than the old lamp
I will air them out for a couple of days and fit them on a day where they have enough time to have no temp difference and see how we go, if the misting returns I shall make a series of discreet holes top and bottom (which cant be seen without removing the lamp units) and see how that goes.
Mist free lights shall be mine



They are both in the airing cupboard however i dont expect anything other than drilling some small holes top and bottom to work permanently. The lamps as stock have a two small breathers already however from my experience with GTo's constant misting lamps this is not enough to equalise the temperature differential between internal and ambient temps.
Also dont expect any miracles from 'New' lights as my brand new light bought from Newbury VX 8 months ago has a 2008 date sticker on it. Crazy thing is the 'New' lamp mists up more than the old lamp

I will air them out for a couple of days and fit them on a day where they have enough time to have no temp difference and see how we go, if the misting returns I shall make a series of discreet holes top and bottom (which cant be seen without removing the lamp units) and see how that goes.
Mist free lights shall be mine

So I decided to try air them out first,
I removed lamps from the car and took the reverse lamps out. I left lamps in airing cupboard for 2 days to completely dry out. The next bit is crucial... leave them in an environment close to ambient for another 24hours to naturalise the internal temp of the lights, if you go out and fit them straight away they will 100% be misted up the following morning. I left mine in the garage.
I refitted them and so far have had one warm sunny day, I then jet washed the car to death removing all the Sahara sand, and then had a night and day of rain.
Up to this point they are still 100% clear of any signs of moisture. I have no doubt this is NOT a permanent fix, but if I only have too do this once or twice a year that's good enough for me.
I will update this at the first sign of moisture..if I haven't topped myself first
I removed lamps from the car and took the reverse lamps out. I left lamps in airing cupboard for 2 days to completely dry out. The next bit is crucial... leave them in an environment close to ambient for another 24hours to naturalise the internal temp of the lights, if you go out and fit them straight away they will 100% be misted up the following morning. I left mine in the garage.
I refitted them and so far have had one warm sunny day, I then jet washed the car to death removing all the Sahara sand, and then had a night and day of rain.
Up to this point they are still 100% clear of any signs of moisture. I have no doubt this is NOT a permanent fix, but if I only have too do this once or twice a year that's good enough for me.
I will update this at the first sign of moisture..if I haven't topped myself first

Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff






