Does The VXR8 Have.................................
Does The VXR8 Have.................................
Author
Discussion

StefanVXR8

Original Poster:

3,620 posts

229 months

Monday 31st March 2014
quotequote all
.................an Australian identification plate anywhere?

Such as this.................



I'm just looking at options of getting my VXR8 to Oz. Can't do it as a personal import as I haven't owned it for 12 months (and highly unlikely I will have by the time I possibly get there).

If it (any car) originally came from Oz and was exported I can import back in, however, it needs the plate as mentioned above and I'm not sure if this would then be possible given the nature of the car being a UK official model if you know what I mean................

Stef

SteveB VXR8

149 posts

185 months

Monday 31st March 2014
quotequote all
The VXR8 has a Holden factory badge with the build no etc just right of the radiator. As Holden is an Aus co this must help?

StefanVXR8

Original Poster:

3,620 posts

229 months

Monday 31st March 2014
quotequote all
Yeah, not sure they would accept that as it's just a build plate.

Apparently I can also import it as long as I have a letter of compliance from the manufacturer too and that doesn't seem to have any 12 month rules etc.

http://www.infrastructure.gov.au/vehicles/imports/...

Stef

motomk

2,188 posts

275 months

Monday 31st March 2014
quotequote all
The VIN is under the window glass. There is also a build plate on the passenger side strut tower near the front of it. That should have Holden all over it!


In this picture, it is just partly obscured on the right side of the air-box.

Another placard, on my car anyway down here, is when you open the front passenger door. In the door jam between the 2 passenger side doors.
The 6G in the VIN = Asia Pacific Australia, reading the Pontiac G8 manual. On my car the next number is 1 which I am guessing equals Holden. On a Pontiac G8, it is a 2. Unless Vauxhall have their own number?? My car is 6G1 etc.



Edited by motomk on Monday 31st March 17:07

JohnnieVXR

67 posts

193 months

Monday 31st March 2014
quotequote all
6G1=World Manufacturer Identifier. 6=Oceania. G=Australia. 1=Holden. These are the first 3 symbols on the VIN plate. Wont that suffice?

StefanVXR8

Original Poster:

3,620 posts

229 months

Monday 31st March 2014
quotequote all
Thanks guys, I'll check it out.

Stef

Dee Tee

543 posts

183 months

Monday 31st March 2014
quotequote all
Sell the Car here and when you get to Oz, Buy a Toyota like everyone else.

StefanVXR8

Original Poster:

3,620 posts

229 months

Monday 31st March 2014
quotequote all
Dee Tee said:
Sell the Car here and when you get to Oz, Buy a Toyota like everyone else.
David Talbot! Wash your mouth out.

wink

Stef

ARAF

20,759 posts

254 months

Monday 31st March 2014
quotequote all
StefanVXR8 said:
Dee Tee said:
Sell the Car here and when you get to Oz, Buy a Toyota like everyone else.
David Talbot! Wash your mouth out.

wink

Stef
Very easy for him to say, but I bet his has the tags you need for yours. wink

Bibbs

3,754 posts

241 months

Tuesday 1st April 2014
quotequote all
Dee Tee said:
Sell the Car here and when you get to Oz, Buy a Toyota like everyone else.
Or have a Toyota AND an HSV.

StefanVXR8

Original Poster:

3,620 posts

229 months

Tuesday 1st April 2014
quotequote all
Bibbs said:
Dee Tee said:
Sell the Car here and when you get to Oz, Buy a Toyota like everyone else.
Or have a Toyota AND an HSV.
Now that's a better answer!

I was looking at the Holden double cab thing..........



Stef

Bibbs

3,754 posts

241 months

Tuesday 1st April 2014
quotequote all
StefanVXR8 said:
I was looking at the Holden double cab thing..........
Wait till you get here. They look okay, but I'm not sold.

I'll probably swap the Hilux for something bigger. Twin cab ute, and it's a little small.

SOULCREW

293 posts

208 months

Tuesday 1st April 2014
quotequote all
get a forg vxr8 ute...i saw shed loads over there wink

ARAF

20,759 posts

254 months

Tuesday 1st April 2014
quotequote all
SOULCREW said:
get a forg vxr8 ute...i saw shed loads over there wink
Eh????? confused

Have you borrowed Goldy's keyboard to write that? wink

StefanVXR8

Original Poster:

3,620 posts

229 months

Tuesday 1st April 2014
quotequote all
ARAF said:
SOULCREW said:
get a forg vxr8 ute...i saw shed loads over there wink
Eh????? confused

Have you borrowed Goldy's keyboard to write that? wink
hehe

Well I received my good news call this morning, job offered, visa options now being looked at to decide which is the best way to get us there and on to permanent residency!

Land of the Holden opportunity here I come!

Stef

SOULCREW

293 posts

208 months

Tuesday 1st April 2014
quotequote all
i have difficulty typing frod.

StefanVXR8

Original Poster:

3,620 posts

229 months

Tuesday 1st April 2014
quotequote all
ARAF said:
SOULCREW said:
get a forg vxr8 ute...i saw shed loads over there wink
Eh????? confused

Have you borrowed Goldy's keyboard to write that? wink
hehe

Well I received my good news call this morning, job offered, visa options now being looked at to decide which is the best way to get us there and on to permanent residency!

Land of the Holden opportunity here I come!

Stef

Dee Tee

543 posts

183 months

Tuesday 1st April 2014
quotequote all
StefanVXR8 said:
David Talbot! Wash your mouth out.

wink

Stef
Maybe, but the reality is, this is happening over there. That's why Oz Built V8's are going out of Production.

Good News on the Job.

ARAF

20,759 posts

254 months

Saturday 5th April 2014
quotequote all
Thought we'd resurrect this thread. smile

StefanVXR8 said:
ARAF said:
StefanVXR8 said:
But of course, back to topic, congrats Ian on the move to VXR8 ownership, especially the one you've gone for, excellent!!

Stef
His is actually a HSV GTS, not a Vauxhall one - as is the red E2 that Preciousmetal also has. You might want to take pictures of his Aussie Type Approval tags. The chassis details will be wrong, but they will have the correct approval codes for the options etc. wink
Doh, mis-read that one!

The VIN on the VXR8 decodes fully to built by Holden Australia and appears bar one digit to be the same as the Oz built HSV ones.

I don't think I'll have any issues Ian regarding the import for the main car, however, there may be issues regarding the supercharger apparently................................

Stef
So it comes off for the journey then, and back on once the car has been tested. smile

What's insurance going to be like there, on a car like that? I guess you'll have immigrant loading, and I'm betting that your NCB doesn't transfer. scratchchin

StefanVXR8

Original Poster:

3,620 posts

229 months

Saturday 5th April 2014
quotequote all
ARAF said:
Thought we'd resurrect this thread. smile

StefanVXR8 said:
ARAF said:
StefanVXR8 said:
But of course, back to topic, congrats Ian on the move to VXR8 ownership, especially the one you've gone for, excellent!!

Stef
His is actually a HSV GTS, not a Vauxhall one - as is the red E2 that Preciousmetal also has. You might want to take pictures of his Aussie Type Approval tags. The chassis details will be wrong, but they will have the correct approval codes for the options etc. wink
Doh, mis-read that one!

The VIN on the VXR8 decodes fully to built by Holden Australia and appears bar one digit to be the same as the Oz built HSV ones.

I don't think I'll have any issues Ian regarding the import for the main car, however, there may be issues regarding the supercharger apparently................................

Stef
So it comes off for the journey then, and back on once the car has been tested. smile

What's insurance going to be like there, on a car like that? I guess you'll have immigrant loading, and I'm betting that your NCB doesn't transfer. scratchchin
Yup, that's what I need to start weighing up. How much more it will cost me to insure my VXR8 Vs a 'local' HSV Clubby R8.

I did use a calculator thing the other day that suggested it was cheaper to import mine than buy local but of course if the cost of insurance on an import as a 'new' driver is going to be huge it closes up that gap quite a bit.

Plus it will be a couple of months in transit so I'd still have to buy something to get me by, plus I'm planning to commute daily in to Perth CBD by train so it will be a weekend car, so there's that to consider...............

Stef