Discussion
Just got the Ro back from failing its MOT:
it failed on the following
1) both anti roll bar drop links excessive play in ball joint
2) battery not secure, it looks like the previous owner changed the battery for the wrong one
3) handbrake not working on one side
4) one of the track rod ends cover is split
The handbrake only looks like its being applied on one side, i.e the bar where the cable splits into 2 is lop sided, so it think either the cable or the brake is siezed.
With regard the track rod end, monkfish's website quotes the replacement having coarse thread, does this mean that some cars have the fine tread or all the monaros coarse.
On a good point, it flew through the emmission, CO was 0.00%, HC 2ppm and lambda bang on 1, so at least the engine is running well
it failed on the following
1) both anti roll bar drop links excessive play in ball joint
2) battery not secure, it looks like the previous owner changed the battery for the wrong one
3) handbrake not working on one side
4) one of the track rod ends cover is split
The handbrake only looks like its being applied on one side, i.e the bar where the cable splits into 2 is lop sided, so it think either the cable or the brake is siezed.
With regard the track rod end, monkfish's website quotes the replacement having coarse thread, does this mean that some cars have the fine tread or all the monaros coarse.
On a good point, it flew through the emmission, CO was 0.00%, HC 2ppm and lambda bang on 1, so at least the engine is running well
Monaro5.7 said:
Failed my mot yesterday on Front drop link and both track rod ends but i had them in my shed and i have the whiteline drop links which are adjustable so got the adjusted and the play was gone 
What car do you have?
It a 2004 CV8, 
What car do you have?
funny thing is i have just bought the road response pack which has the drop link bushes and now i need new droplinks, the ones from monkfish include these bushes, so it looks like i will have a spare set.
Monaro5.7 said:
A company called Febi Bilstein list T.R.ends for the 04 Monaro which is the ones iam fitting but cant confirm they will fit till Monday hopefully.
But the part numbers for them are LH 14106 RH 14107.
had a look at the febi bilsteins and the thread is M14 x 1.5mm, just measured the thread pitch on mine and its 2.0mm so i don't think these will fit. But the part numbers for them are LH 14106 RH 14107.
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff


