shipping from Aus
Author
Discussion

robbyd

Original Poster:

654 posts

206 months

Tuesday 8th April 2014
quotequote all
Can anyone recommend a cost effective method of shipping (a pair of headers) from Aus please?

Looking at some DiFillipos but DHL seems to cost things on an effective volumetric weight, and with an estimated package size of 100x60x50cm they're quoting 1594 AUD!!!
Considerably more than the headers. DiFillipoo says I would have to arrange my own courier, for some reason...

Rob

richie slow

7,570 posts

195 months

Tuesday 8th April 2014
quotequote all
At that rate it's cheaper to fly out there and carry them back. yikes

Can you pick me up some Holden wheel centres while you're there? hehe

GAL001

1,444 posts

206 months

Tuesday 8th April 2014
quotequote all
Would be cheaper to have custom made surely?

robbyd

Original Poster:

654 posts

206 months

Tuesday 8th April 2014
quotequote all
yes - it is looking like that now!

Drew SS

2,683 posts

215 months

Tuesday 8th April 2014
quotequote all
Toll Australia ship them by sea takes a bit but a lot cheaper dhl most likely will be flying them

SturdyHSV

10,443 posts

198 months

Tuesday 8th April 2014
quotequote all
Wasn't someone on the forum trying to fill a crate with bits in Aus to ship back last week? Maybe he has some spare room?

I can't remember which thread it was though, sorry frown

robbyd

Original Poster:

654 posts

206 months

Tuesday 8th April 2014
quotequote all
thanks for the replies - yes, DHL was flying them but couldn't offer an alternative to that...

eybic

9,212 posts

205 months

Tuesday 8th April 2014
quotequote all
I'm pretty sure all carriers will "volumise" them unfortunately

L2VXR

1,014 posts

244 months

Tuesday 8th April 2014
quotequote all
I've just had a set of longtube headers sent from vpw.com.au and they charged $350 shipping and they arrived 7 days later via fedex

DougieMc

1,794 posts

252 months

Tuesday 8th April 2014
quotequote all
Sarge has a reliable shipping company he uses hahaaaa

robbyd

Original Poster:

654 posts

206 months

Tuesday 8th April 2014
quotequote all
350 I could live with...

S60hsv

373 posts

152 months

Tuesday 8th April 2014
quotequote all
robbyd said:
Can anyone recommend a cost effective method of shipping (a pair of headers) from Aus please?

Looking at some DiFillipos but DHL seems to cost things on an effective volumetric weight, and with an estimated package size of 100x60x50cm they're quoting 1594 AUD!!!
Considerably more than the headers. DiFillipoo says I would have to arrange my own courier, for some reason...

Rob
Hand luggage ;-)

robbyd

Original Poster:

654 posts

206 months

Tuesday 8th April 2014
quotequote all
hand luggage -or down my trousers?

Have contacted TOLL for a quote - hopefully they'll come in ok.

djwilk

1,693 posts

200 months

Tuesday 8th April 2014
quotequote all
How much are those headers costing? I might be tempted to buy a set myself and share the shipping if you are interested?

robbyd

Original Poster:

654 posts

206 months

Tuesday 8th April 2014
quotequote all
1,395 AUD for 1 7/8" long headers for LS1 - same for LS2??

Includes GST (vat) which should be able to claim back... Shouldn't have to pay it in the first place really as this is for export.

Add import duties and VAT at this end as well...

djwilk

1,693 posts

200 months

Tuesday 8th April 2014
quotequote all
Thanks for that.
It seems a little bit on an expensive side to me... What is the name of the retailer? Perhaps, they do something cheaper than that as well?

Drew SS

2,683 posts

215 months

Tuesday 8th April 2014
quotequote all
You should be getting it gst free as I've just bought a load of stuff just recently and have had it sent over gst free ask them if they refuse move on to another seller I wouldn't give them the light of day to be honest if you want to pm me I can share a few other tricks with you might save you a bit on duty and vat

Andy

L2VXR

1,014 posts

244 months

Tuesday 8th April 2014
quotequote all
Mine were 1"7/8 4 into 1 ProFlow headers, I ordered the headers, 2 o2 loom extensions and a set of heat resistant plug lead sleeves
and that came to $990 including shipping then I got the import duty once they arrived of around £130 so call it £700 delivered.
There would also be the cost of the cat pipes to add to the overall cost but I have these already

Edited by L2VXR on Tuesday 8th April 20:28

robbyd

Original Poster:

654 posts

206 months

Tuesday 8th April 2014
quotequote all
trouble is they're Difillipo and he is the manufacturer - so not like I can get them elsewhere really...

Also have Difillipo 1 3/4" on at the moment, so these will fit the system.

But yes you're right - shouldn't have to pay the GST...

impVXR888

98 posts

153 months

Tuesday 8th April 2014
quotequote all
X-Force sent my headers over using TNT for $290AUD