Zircotec Benefits?
Author
Discussion

S800VXR

Original Poster:

5,877 posts

231 months

Friday 25th April 2014
quotequote all
Getting a full exhaust as soon as Roger gets it in and was wondering about the real world benefits of this coating on the headers...? Any experiance verses word of mouth would be appreciated as they are not far up the road from me.

neiljohnson

11,298 posts

238 months

Friday 25th April 2014
quotequote all
Have it on my manifold on the focus compared to my brothers which has not

After a hard run I can touch my manifold 20 mins after stopping brothers takes an hour

I have no heat shield on my manifold but my brother does his bonnet still gets a lot hotter than mine

Better to have it done on a new exhaust as the coating will last a lot longer

Judging by how the ro's & r8's I've seen get under the bonnet it's worthwhile in my opinion

moif

1,331 posts

191 months

Friday 25th April 2014
quotequote all
Well worth it,the difference in heat is very noticable.......not cheap but

KMud

2,924 posts

187 months

Friday 25th April 2014
quotequote all
Is anyone NA having a heat problem?

ringram

14,702 posts

279 months

Friday 25th April 2014
quotequote all
Mine cranks slow once hot. Tried a few things. It starts, but power cable temp to the starter is probably the cause. Coating might help..
Coating probably helps intake charge temps a tad anyway..

007 VXR

64,187 posts

218 months

Friday 25th April 2014
quotequote all
Having mine done in August smile

No realy issues, but every bit helps biggrin

KMud

2,924 posts

187 months

Friday 25th April 2014
quotequote all
ringram said:
Mine cranks slow once hot. Tried a few things. It starts, but power cable temp to the starter is probably the cause. Coating might help..
Coating probably helps intake charge temps a tad anyway..
Haven't noticed this personally, I'll keep an eye out for it.

ARAF

20,759 posts

254 months

Friday 25th April 2014
quotequote all
What is the cost of coating them? And is Zircotec best, or are other companies just as good? Moif?

S800VXR

Original Poster:

5,877 posts

231 months

Friday 25th April 2014
quotequote all
It's about £375 for manifolds.

ARAF

20,759 posts

254 months

Friday 25th April 2014
quotequote all
S800VXR said:
It's about £375 for manifolds.
Ta.

S800VXR

Original Poster:

5,877 posts

231 months

Friday 25th April 2014
quotequote all
The process they have uses a plasma arc to melt the ceramic and this is sprayed onto the prepped surface where it bonds and solidifies in one. Supposedly it's the best.

wav8

3,926 posts

179 months

Friday 25th April 2014
quotequote all
S800VXR said:
It's about £375 for manifolds.
Sure that is for one side only,think thats what Moif told me at Malton

ARAF

20,759 posts

254 months

Friday 25th April 2014
quotequote all
S800VXR said:
The process they have uses a plasma arc to melt the ceramic and this is sprayed onto the prepped surface where it bonds and solidifies in one. Supposedly it's the best.
Whilst I understand it is well respected in the auto industry, there are some pretty good coatings that are used in the aero industry, inside jet engines.....

......I wonder what GSD has in his shed. hehe

007 VXR

64,187 posts

218 months

Friday 25th April 2014
quotequote all
wav8 said:
Sure that is for one side only,think thats what Moif told me at Malton
more like 800.

LS2Noir

274 posts

156 months

Friday 25th April 2014
quotequote all
S800VXR said:
Getting a full exhaust as soon as Roger gets it in and was wondering about the real world benefits of this coating on the headers...? Any experiance verses word of mouth would be appreciated as they are not far up the road from me.
My Zircotec headers, on the bike heat dissipation was not a consideration, durability was the reason I went for the Zercotec coating, so far I am pleased with the coating durability.





KMud

2,924 posts

187 months

Friday 25th April 2014
quotequote all
ARAF said:
Whilst I understand it is well respected in the auto industry, there are some pretty good coatings that are used in the aero industry, inside jet engines.....

......I wonder what GSD has in his shed. hehe
I don't think you can afford the likes of MCrAlY + TBC! The processes by which they are applied are brutal if you ever get to watch it though smokin

ARAF

20,759 posts

254 months

Friday 25th April 2014
quotequote all
Nice TL, LS2. cool




How about something like this as a coating?

http://www.indestructible.co.uk/PL95-R1/

LS2Noir

274 posts

156 months

Saturday 26th April 2014
quotequote all
[quote=ARAF]Nice TL, LS2. cool




Thanks for the compliment ARAF, now all I need is a double garage so I can park the TL and Monaro side by side and offer them both equal amounts of attention during those long dark winter evenings scratchchin

moif

1,331 posts

191 months

Saturday 26th April 2014
quotequote all

The cost is not cheap but the quality and service is exceptional
Once I spoke to them and the sent me the info about themselves and sent some video's of there process it was sold to me
I went for a performance colour (there words)due to the fact that plain white is porous and can stain
The cost was £840 which included them picking them up and returning them...if I had gone for white you can take £200 off
Then you have to remove and refit the manifolds so extra cost unless you can do it yourself
They advise 10 working days from when they receive them....mine took 6 days

gsd2000

11,515 posts

214 months

Saturday 26th April 2014
quotequote all
ARAF said:
S800VXR said:
The process they have uses a plasma arc to melt the ceramic and this is sprayed onto the prepped surface where it bonds and solidifies in one. Supposedly it's the best.
Whilst I understand it is well respected in the auto industry, there are some pretty good coatings that are used in the aero industry, inside jet engines.....

......I wonder what GSD has in his shed. hehe
i haven't got anything but now you have me thinking