Pad performance from cold?
Pad performance from cold?
Author
Discussion

smgee

Original Poster:

81 posts

173 months

Saturday 26th April 2014
quotequote all
The general consensus seems to be that Performance Friction pads are "best", but are there any compromises? I read a comment that performance when cold wasn't that great. Any experiences?

My front pads are shot (06 CV8) and I'm suffering the common steering-wobble under harder braking. With around 33k miles, the discs look in great condition, no lip, no ridges, so I don't want to go to VXR ones just yet.

The routes I take are fairly straight, mostly 30 limits & dual carriageways. Big braking into roundabouts leaves a lot of room for improvement, but it's infrequent and so I need performance from cold.

Thanks for any experiences.

Steve

richie slow

7,570 posts

195 months

Saturday 26th April 2014
quotequote all
I didn't ever manage to cure the judder completely, but it was a lot better with PF pads.
I can't say I ever noticed anything about the performance of CV8 brakes other than them being woefully inadequate for stopping a car that weighs nearly two tons. I gave up rather quickly with the little CV8 brakes and went for some VXRs with braided hoses and now have much more confidence in the middle pedal.

That said, VXR brakes will stop you quite quickly but won't do it repeatedly (ie. on a track). I've driven cars with APs and similar and they have amazing stopping power and great feel to the brake pedal but I don't need the ultimate stopping performance (touch wood!) so I haven't spent the cash either.

KMud

2,924 posts

187 months

Saturday 26th April 2014
quotequote all
I'm not sure if you'll find VXR brakes a significant improvement on 06 CV8 ones.

smgee

Original Poster:

81 posts

173 months

Saturday 26th April 2014
quotequote all
Cheers guys

I already have some s/h VXR calipers on the shelf, but was loathed to spend nearly £400 on front discs for a 10mm increase in diameter, particularly as the pad contact area is the same. That's assuming that I could leave the rears alone. I thought I'd give the pads a go first, as I'm pretty sure that's where the main improvements will come from.

KMud

2,924 posts

187 months

Saturday 26th April 2014
quotequote all
Maybe sell the VXR calipers and get the 4 pot APs or Harrops?

smgee

Original Poster:

81 posts

173 months

Saturday 26th April 2014
quotequote all
KMud said:
Maybe sell the VXR calipers and get the 4 pot APs or Harrops?
Not going to happen, no budget!

snowwolf

11,503 posts

206 months

Saturday 26th April 2014
quotequote all
KMud said:
I'm not sure if you'll find VXR brakes a significant improvement on 06 CV8 ones.
I had the 06 CV8 and changed to VXR discs and calipers and PF pads and noticed a lot of difference, well worth it in my opinion.

KMud

2,924 posts

187 months

Saturday 26th April 2014
quotequote all
snowwolf said:
I had the 06 CV8 and changed to VXR discs and calipers and PF pads and noticed a lot of difference, well worth it in my opinion.
Also braided hoses? I upgraded to vxr brakes/dba discs/pf pads/braided lines from 04 cv8 oe equipment, obviously that made some difference!

smgee

Original Poster:

81 posts

173 months

Saturday 26th April 2014
quotequote all
snowwolf said:
I had the 06 CV8 and changed to VXR discs and calipers and PF pads and noticed a lot of difference, well worth it in my opinion.
How did/do you find the PF pads when cold?

richie slow

7,570 posts

195 months

Saturday 26th April 2014
quotequote all
Mine tends to sit for a few days in-between drives so I have to clean the surface rust off first each time. Can't say I've ever noticed any performance difference with pad temperatures, other than if you get them really, really hot on a track and they fade very badly yikes

stevieturbo

18,105 posts

278 months

Saturday 26th April 2014
quotequote all
smgee said:
The general consensus seems to be that Performance Friction pads are "best", but are there any compromises? I read a comment that performance when cold wasn't that great. Any experiences?

My front pads are shot (06 CV8) and I'm suffering the common steering-wobble under harder braking. With around 33k miles, the discs look in great condition, no lip, no ridges, so I don't want to go to VXR ones just yet.

The routes I take are fairly straight, mostly 30 limits & dual carriageways. Big braking into roundabouts leaves a lot of room for improvement, but it's infrequent and so I need performance from cold.

Thanks for any experiences.

Steve
If you want OEM cold braking, OEM pads are always great.

Lots of performance pads do lack a little in the cold area though. You could try giving Brummie/Carbon Lorraine pads a shout.

I tried a set of his R6's or whatever they're called and cold braking was much better than the Ferodo DS2500's or AP404's I had before them.

So their R5's would probably be sueprb from cold.

Monaro5.7

7,337 posts

210 months

Saturday 26th April 2014
quotequote all
smgee said:
Cheers guys

I already have some s/h VXR calipers on the shelf, but was loathed to spend nearly £400 on front discs for a 10mm increase in diameter, particularly as the pad contact area is the same. That's assuming that I could leave the rears alone. I thought I'd give the pads a go first, as I'm pretty sure that's where the main improvements will come from.
Front VXR discs from EBC have dropped in price check the FAQ for part numbers should be around 250 for the pair off ebay.

smgee

Original Poster:

81 posts

173 months

Saturday 26th April 2014
quotequote all
Monaro5.7 said:
Front VXR discs from EBC have dropped in price check the FAQ for part numbers should be around 250 for the pair off ebay.
You're right! A quick search of the net shows:

D7299 (plain) for £250
GD7299 (grooved) for about £300

That then begs the question, could I get away with leaving the rears alone and just changing the fronts to VXR discs? Also, EBC yellow of PF pads with these?!

neiljohnson

11,298 posts

238 months

Saturday 26th April 2014
quotequote all
A lot on here have had issues with ebc's & personally I wouldn't fit then to a of kart

The discs are ok if your not into b rd blasting or track work though

Performance friction are a good pad & I see no reason why only having Vxr brakes on the front would cause you an issue