One for the modded holden owners
Discussion
Having modded previous motors, Scoobys and skylines mainly, I always found myself to have a garage full of standard parts, was wondering what sort of parts you all have in yours that you keep just in case?
Pretty sure 6 months ago I could of built a very interesting motor out of my bits before I jogged them on lol!
Pretty sure 6 months ago I could of built a very interesting motor out of my bits before I jogged them on lol!
I've never left the standard component in one piece 
Stock LS2 engine detonated it into tiny pieces
Stock gearbox ended up stuck in 5th and all other gears inoperative
Original turbos in the turbo kit were to far gone to be salvaged so the internals were junked and were replaced with nice Garrett internals
I'm sure you can see a pattern forming.....

Stock LS2 engine detonated it into tiny pieces
Stock gearbox ended up stuck in 5th and all other gears inoperative
Original turbos in the turbo kit were to far gone to be salvaged so the internals were junked and were replaced with nice Garrett internals
I'm sure you can see a pattern forming.....
I've so far sold:
Seats
Flywheel
Intake manifold
Plastic engine cover
Spare wheel
Front strut brace
Shift knob
Airbox / tube (may have given these away free)
Slam panel radiator shroud thing
My spare room still has parts in it unfortunately, a clutch and a steering rack, and there's a couple of boxes of bits hidden under some stairs. May take them to the scrappy as they're reasonably chunky bits of metal... Presumably I'll get about 6p for them though...
Here's a picture of my car, it's much more lightweight now

Seats
Flywheel
Intake manifold
Plastic engine cover
Spare wheel
Front strut brace
Shift knob
Airbox / tube (may have given these away free)
Slam panel radiator shroud thing
My spare room still has parts in it unfortunately, a clutch and a steering rack, and there's a couple of boxes of bits hidden under some stairs. May take them to the scrappy as they're reasonably chunky bits of metal... Presumably I'll get about 6p for them though...
Here's a picture of my car, it's much more lightweight now

KMud said:
I've managed to lose a lot of my spares, but 04 CV8 bits aren't the most desirable. Still tripping over:
Complete set of wheels
Complete set of brakes
Complete set of springs
Engine cover
2x centre consoles
Spare cluster
Most switchgear
Need a diff :
forgot about the suspension, wheels, brakes and intake manifoldComplete set of wheels
Complete set of brakes
Complete set of springs
Engine cover
2x centre consoles
Spare cluster
Most switchgear
Need a diff :
Scattered about (not in the boot):
Set of 2005 VXR alloys
Set of replica VXR alloys (new)
Set of 19-inch VXR8 alloys
CV8 gearbox
LS1 engine (stock for now)
LS2 engine (being forged/stroked to 6.7)
11.3 litre big block short engine
Pair of 1150 split Dominator carbs
2004 Monaro VXR rolling shell
Pair of doors
CV8 seats
2005 VXR seats
VXR nostril bonnet
2 VXR bootlids (one with spoiler)
2004 Monaro exhaust
Stainless 2005 Monaro catback exhaust
VXR front and rear bumpers
CV8 rear bumper
Eaton 122 supercharger (soon to be intercooled)
FAST 102 intake
Various props
2005 VXR diff
Complete 1200-hp+ turbo set-up (turbos , manifolds, waste gates, etc)
APS brake kit
Various poly bushes
Front accessory drive kit
Set of CV8 rear lights
Set of front lights
Stock clutch and flywheel
New O2 sensors
Little bearing for the end of the crankshaft
4L80E autobox (modified to take 1000hp+)
Elsewhere, a rolling Holden Commodore, smashed 2005VXR in a bush and a rolling CV8 with a full VXR body kit.
Funnily enough, I have no working car
Set of 2005 VXR alloys
Set of replica VXR alloys (new)
Set of 19-inch VXR8 alloys
CV8 gearbox
LS1 engine (stock for now)
LS2 engine (being forged/stroked to 6.7)
11.3 litre big block short engine
Pair of 1150 split Dominator carbs
2004 Monaro VXR rolling shell
Pair of doors
CV8 seats
2005 VXR seats
VXR nostril bonnet
2 VXR bootlids (one with spoiler)
2004 Monaro exhaust
Stainless 2005 Monaro catback exhaust
VXR front and rear bumpers
CV8 rear bumper
Eaton 122 supercharger (soon to be intercooled)
FAST 102 intake
Various props
2005 VXR diff
Complete 1200-hp+ turbo set-up (turbos , manifolds, waste gates, etc)
APS brake kit
Various poly bushes
Front accessory drive kit
Set of CV8 rear lights
Set of front lights
Stock clutch and flywheel
New O2 sensors
Little bearing for the end of the crankshaft
4L80E autobox (modified to take 1000hp+)
Elsewhere, a rolling Holden Commodore, smashed 2005VXR in a bush and a rolling CV8 with a full VXR body kit.
Funnily enough, I have no working car

ArnieVXR said:
Scattered about (not in the boot):
Set of 2005 VXR alloys
Set of replica VXR alloys (new)
Set of 19-inch VXR8 alloys
CV8 gearbox
LS1 engine (stock for now)
LS2 engine (being forged/stroked to 6.7)
11.3 litre big block short engine
Pair of 1150 split Dominator carbs
2004 Monaro VXR rolling shell
Pair of doors
CV8 seats
2005 VXR seats
VXR nostril bonnet
2 VXR bootlids (one with spoiler)
2004 Monaro exhaust
Stainless 2005 Monaro catback exhaust
VXR front and rear bumpers
CV8 rear bumper
Eaton 122 supercharger (soon to be intercooled)
FAST 102 intake
Various props
2005 VXR diff
Complete 1200-hp+ turbo set-up (turbos , manifolds, waste gates, etc)
APS brake kit
Various poly bushes
Front accessory drive kit
Set of CV8 rear lights
Set of front lights
Stock clutch and flywheel
New O2 sensors
Little bearing for the end of the crankshaft
4L80E autobox (modified to take 1000hp+)
Elsewhere, a rolling Holden Commodore, smashed 2005VXR in a bush and a rolling CV8 with a full VXR body kit.
Funnily enough, I have no working car
I think you win this thread Set of 2005 VXR alloys
Set of replica VXR alloys (new)
Set of 19-inch VXR8 alloys
CV8 gearbox
LS1 engine (stock for now)
LS2 engine (being forged/stroked to 6.7)
11.3 litre big block short engine
Pair of 1150 split Dominator carbs
2004 Monaro VXR rolling shell
Pair of doors
CV8 seats
2005 VXR seats
VXR nostril bonnet
2 VXR bootlids (one with spoiler)
2004 Monaro exhaust
Stainless 2005 Monaro catback exhaust
VXR front and rear bumpers
CV8 rear bumper
Eaton 122 supercharger (soon to be intercooled)
FAST 102 intake
Various props
2005 VXR diff
Complete 1200-hp+ turbo set-up (turbos , manifolds, waste gates, etc)
APS brake kit
Various poly bushes
Front accessory drive kit
Set of CV8 rear lights
Set of front lights
Stock clutch and flywheel
New O2 sensors
Little bearing for the end of the crankshaft
4L80E autobox (modified to take 1000hp+)
Elsewhere, a rolling Holden Commodore, smashed 2005VXR in a bush and a rolling CV8 with a full VXR body kit.
Funnily enough, I have no working car


Granada Window Winder handle
Mk1 Fiesta Clock Set
Set of Pug GTi Mudflap Badges
Pug Central Locking Bits and a Plip Fob
One Pug Quicksilver Sticker
Bits of Xsara Boot
2 Cargo nets and a Brand New Roofrack for a 2012 Octavia Estate
LS2 Cam, Cats, Headers, Airbox and A new battery I've yet to fit
A dozen flight cases
And
A Garage FULL of what the Old Man Considered Useful
Where does it all come from?
And a pair of Chrome Pajero electric Mirrors
Mk1 Fiesta Clock Set
Set of Pug GTi Mudflap Badges
Pug Central Locking Bits and a Plip Fob
One Pug Quicksilver Sticker
Bits of Xsara Boot
2 Cargo nets and a Brand New Roofrack for a 2012 Octavia Estate
LS2 Cam, Cats, Headers, Airbox and A new battery I've yet to fit
A dozen flight cases
And
A Garage FULL of what the Old Man Considered Useful

Where does it all come from?

And a pair of Chrome Pajero electric Mirrors
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff





