Cam? Supercharged ro ls2

[S60hsv]

How much does this cost any ideas

[S60hsv]

Installed

[007 VXR]

Cam with bits and remap
about 2k

[KMud]

Cam w/ accessories (pushrods, springs, valve stem seals) ~$700-->£600?
Installation £400-???
Tune £400-800

There are other tempting bits while you're in there. At least upgrade the trunnion bearings.

[S60hsv]

Thanks what sort of power gains should I expect from this just a average ball parcel figure and would I need to up grade fuel system as it is already 550 bhp ?

[007 VXR]

S60hsv said:

Thanks what sort of power gains should I expect from this just a average ball parcel figure and would I need to up grade fuel system as it is already 550 bhp ?

550 fly ?

What psi are you running on the S/C ?

Cam should be good for about 30/40rwhp.
But its the way it drives/pulls and feels is more important than the hp gains imho

[S60hsv]

Fly yeah I wish it was wheel

[007 VXR]

S60hsv said:

Fly yeah I wish it was wheel

What psi you running ? 6 or 9 ?

500rw can be had from a 122. cam could push that abit but fuel will be close to maxing out

[monkfish1]

Most we have done on a 122 with a cam is 542 rear wheel at SRR. There might be a little more in there, but not much.

[007 VXR]

monkfish1 said:

Most we have done on a 122 with a cam is 542 rear wheel at SRR. There might be a little more in there, but not much.

what was different from my 2300 Cam set up ?

[S60hsv]

monkfish1 said:

Most we have done on a 122 with a cam is 542 rear wheel at SRR. There might be a little more in there, but not much.

Am really confused what is the difference between 122 and 2300 as I was told by some one else it was a 2300 just not the same coler as most ? Sorry

[S60hsv]

007 VXR said:

What psi you running ? 6 or 9 ?

500rw can be had from a 122. cam could push that abit but fuel will be close to maxing out

I really don't know how would I find out is it to do with pulley size ?

[S60hsv]

[007 VXR]

S60hsv said:

I really don't know how would I find out is it to do with pulley size ?

yes,

must be about 6psi

imho for traction 6psi with a Cam would be best ..

[S60hsv]

[monkfish1]

Thats a 112, not a 122.

[007 VXR]

S60hsv said:

Thats not a TVS.

[S60hsv]

[S60hsv]

No manga charger 2.3 I thought erm doh Homs simson time what the bad news gulp

[S60hsv]

monkfish1 said:

Thats a 112, not a 122.

O dear that don't sound good gulp