best place for number plates

[maccavvy]

Hey guys,

Im looking to get some new plates for when my reg is transferred over from old car to the Ro..

wheres the best place to get them from as the front is smaller than normal!

any help appreciated.

[jonnM]

I've used Craigsplates a few times for non-standard size plates.

[KMud]

I just found somewhere local, had them print motorbike/quad-sized letters on a full-sized plate, and cut it down myself.

[wozzza]

Got mine from Demonplates, with the domed 3D text.

[mik_ok]

The std bumper aperture is 380mm (or 15") wide (VXR8 as opposed to Monaro).

I originally had a front plate made by craigsplates in 15" x 3.5" but the font was way too small/thin.

I then had one made by myshowplates who had to do it in their std 16.5" x4.5" "import plate" size. They agreed to bias the text to one side so i could cut 1.5" off with a tile saw to get it to fit with centred text.

I would suggest you carry a copy of the regs around with you so you can prove compliance if challenged.