PAS fluid type
Author
Discussion

Hex

Original Poster:

568 posts

226 months

Friday 12th September 2014
quotequote all
So after the PAS return pipe holed itself, I've took to making a replacement (as the fish had none).



My question is, is there any specific type of PAS fluid I need or can I just go pick some up from Halfrauds?

Cheers guys.

ARAF

20,759 posts

254 months

Friday 12th September 2014
quotequote all
PAS usually uses ATF, doesn't it?

Hex

Original Poster:

568 posts

226 months

Friday 12th September 2014
quotequote all
That was my thought, just checking it wasn't some random special type. laugh

stevieturbo

18,103 posts

278 months

Friday 12th September 2014
quotequote all
It will say on the lid of the reservoir.

Dex 2 or 3 usually. higher numbers are usually fine in place of lower numbers.

Hex

Original Poster:

568 posts

226 months

Friday 12th September 2014
quotequote all
Cheers fella thumbup

notransistors

278 posts

186 months

Saturday 13th September 2014
quotequote all
Wait!

Dex III is the only stuff that will not ruin our steering or auto or manual tranny. Answer is based on collective experience of LS1GTO.com. In this case, higher number is NOT better.

Hex

Original Poster:

568 posts

226 months

Saturday 13th September 2014
quotequote all
Okie dokie, so any Dex 3 stuff.

Cheers smile

stevieturbo

18,103 posts

278 months

Saturday 13th September 2014
quotequote all
notransistors said:
Wait!

Dex III is the only stuff that will not ruin our steering or auto or manual tranny. Answer is based on collective experience of LS1GTO.com. In this case, higher number is NOT better.
Even Tremec themselves say later transmissions come with Dex6 from the factory.

Dex 6 is backwards compatible with lower numbers.

But really as it isnt needed and it's bloody expensive, no point buying a higher number.

VinceM

1,906 posts

169 months

Saturday 13th September 2014
quotequote all
Dex 3 for PAS in a Ro.

This will do just the job: http://www.halfords.com/motoring/engine-oils-fluid...

notransistors

278 posts

186 months

Sunday 14th September 2014
quotequote all
I have actually spoken to Tremec. They will only recommend Type III for my vintage box.

The Dextron series of fluids is NOT backwards-compatable.

stevieturbo

18,103 posts

278 months

Sunday 14th September 2014
quotequote all
notransistors said:
I have actually spoken to Tremec. They will only recommend Type III for my vintage box.

The Dextron series of fluids is NOT backwards-compatable.
Seems GM replaced Dex 3 with Dex 6....


http://www.opieoils.co.uk/p-968-fuchs-titan-atf-60...

Note comment [quote]Due to the fact that DEXRON VI is strictly backwards compatible in GM applications - which means fully applicable even in older components demanding former DEXRON specifications

VinceM

1,906 posts

169 months

Sunday 14th September 2014
quotequote all
Dexron 6 IS backwards compatible with all the previous Dexron versions and in theory with the ancient type a suffix a spec. However in practice you would not use a Dexron 6 product for a Dexron 1 application for example.

Dexron 6 is the latest GM spec and to claim it it must be licenced by GM. Dexron 2 and 3 are obsolete as such and do not require this.


Some useless info on a Sunday afternoon for you smile