Monaro Front Inner Arch Liner Removal

[arh1a]

Started the strip down for the underseal process with the front of the car and I am having trouble removing the front plastic inner arches. I've removed the 4 self tapper screw (2 on side skirt, 1 on arch lip and the other above the bumper screw at the front. Also I removed the 4 plastic screw clips. It feels looser but still quite firm at the top of the arch, just don't want to break anything!

Any advice would be much appreciated

[r-kid]

Not exactly sure for a Ro, but on the R8 they are hooked behind the wheel arch lip. Which needs a little maneuvering to get it off this & loose. I'm guessing this may be your issue.

[monkfish1]

You have taken all the screws and clips out, so just grab it at the top near the strut and pull it inwards towards the engine. Fair bit of force required though.

[arh1a]

Thanks worked a treat