Exhaust cut outs vs back box delete
Exhaust cut outs vs back box delete
Author
Discussion

Wolfracer

Original Poster:

2,074 posts

230 months

Monday 9th February 2015
quotequote all
I/we are loving the new VXR8. The mrs loves the "sleeper" status and the nice quiet exhaust. She didn't like the Wortec on the Ro as it was always "'kin noisy" especially first thing in a morning.

However, at anything other than full chat, I might as well be driving a 4 pot motor as the V8 is extremely quiet, and as you know, driving at WOT/ full chat all the time is expensive on the wallet and the potential points on your licence.... wink

So, How do I make it a little bit more "lively" at fuller throttle openings but still quite refined at bumbling around town speeds?

I was hoping a pair of cut outs by the rear silencers would be suitable, but am getting nervous that most folks don't work that well in the long term. If you can tell me differently then please do.

Or a back box delete.
Will this add too much resonance/boom though?

I don't like the twin pea shooters as supplied by VX so I want to change the tips any way to so big ovals, so might as well explore some more options whilst the car's on the 4 post lift.... wink

Any advice is welcome.
Cheers.
John


Wolfracer

Original Poster:

2,074 posts

230 months

Monday 9th February 2015
quotequote all
Oh and a cat back/headers is NOT an option...




















yet.

badboyburt

2,043 posts

201 months

Monday 9th February 2015
quotequote all
Ovals do look good,



But then I am biased.

SteveMJ

919 posts

220 months

Monday 9th February 2015
quotequote all
Wolfracer said:
... V8 is extremely quiet,...a pair of cut outs by the rear silencers would be suitable,
Hi John,

I too found the stock exhaust lacked the V8 soundtrack and fitted a Walkinshaw late last summer, this tends to be rather noisy, especially with an auto. BTW will be looking to change this sometime, if anyone wants to contact me :-)

I too wondered about cut-outs on the stock and would be interested to hear opinions and if anyone has tried this?

Regards, Steve

Wolfracer

Original Poster:

2,074 posts

230 months

Tuesday 10th February 2015
quotequote all
badboyburt said:
Ovals do look good,



But then I am biased.
Oh yes! biggrin

vxr2010

2,625 posts

183 months

Tuesday 10th February 2015
quotequote all
I deleted back boxes it ran really bad on standard exhaust , I got small silencers welded into the delete pipes plus ordered up some bad land cut outs and got them welded into the back boxes and either way noise is just right plus a lot cheaper than complete system

ARAF

20,759 posts

247 months

Tuesday 10th February 2015
quotequote all
This has been posted here and elsewhere before.







I've also popped some 75mm chrome sleeves over the aluminium ends, which look better.

I also had the centre box and resonators cut out, and replaced with a kissing pipe.



With the cutouts closed, it's whisper quiet - nearly as quiet as a standard car, with no droning.

Oddly, with the cutouts open, there's still no droning, but it's a lot louder. If you want to know how loud, take your rear boxes off, and go for a short drive. It's still quieter than you'd think.

maxmc2

2,063 posts

209 months

Tuesday 10th February 2015
quotequote all
How's about de-catting and an x-pipe

Wolfracer

Original Poster:

2,074 posts

230 months

Wednesday 11th February 2015
quotequote all
maxmc2 said:
How's about de-catting and an x-pipe
Does that add much moise or just aid performance?

The car is quick enough. Its my mrs' daily drove to the railway station and my weekend toy. So we want the best of both worlds. She won't appreciate me making it "noisy" all the time. frown

So I need a switch, just for me, for weekends! wink

Can anyone recco uk based suppliers or are the ones above that good?

stubbsey

546 posts

206 months

Wednesday 11th February 2015
quotequote all
Noise without performance is a waste in my opinion. Headers and cat back, and switchable if you have to! just an opinion

Wolfracer

Original Poster:

2,074 posts

230 months

Wednesday 11th February 2015
quotequote all
stubbsey said:
Noise without performance is a waste in my opinion. Headers and cat back, and switchable if you have to! just an opinion
I drive a hilux pick up during the week
70 mph is a target not a limit.;)
The 8 has plenty for me as it is! If it was my daily drive then yes I might go power seeking. As it stands, all I want is a nice growl. wink

Wolfracer

Original Poster:

2,074 posts

230 months

Wednesday 11th February 2015
quotequote all
stubbsey said:
Noise without performance is a waste in my opinion. Headers and cat back, and switchable if you have to! just an opinion
I drive a hilux pick up during the week
70 mph is a target not a limit.;)
The 8 has plenty for me as it is! If it was my daily drive then yes I might go power seeking. As it stands, all I want is a nice growl. wink

mr2wilky

17 posts

135 months

Thursday 12th February 2015
quotequote all
There is a possible third option!!! I've got a full Milltek system on mine and it's still really quiet. I took the boxes off to see what baffles are in, and was shocked to find none! I don't know how a pair of straight through boxes are so effective. However over the next week or so I'm going to play about sleeving them! I'm thinking of sleeving the full length but with around a 1" slot cut the full length of the sleeve pipe just to allow some silencing to take the edge off. The best bit is it's cheap and you can play about with different length sleeves etc depending how loud you want it. Very easy to do with mine but I'm not sure what's in the standard boxes so it might not be so easy.

Also AAS in Newcastle a very highly recommended for exhaust mods including custom systems and bypass valves if that's any help?

SteveMJ

919 posts

220 months

Thursday 12th February 2015
quotequote all
Have you a sound clip you could post up please?

I that last photo I can't see any back boxes at all in the cavity under the rear of the car - whats all that about?

Cheers, Steve

ARAF

20,759 posts

247 months

Thursday 12th February 2015
quotequote all
SteveMJ said:
Have you a sound clip you could post up please?

I that last photo I can't see any back boxes at all in the cavity under the rear of the car - whats all that about?

Cheers, Steve
That would be our Ute - and prior to the kissing pipe, the rear boxes had been replaced with straight through pipes that droned. When the centre boxes were taken out, the old VXR8 rear boxes were installed.

SteveMJ

919 posts

220 months

Thursday 12th February 2015
quotequote all
ARAF said:
That would be our Ute - and prior to the kissing pipe, the rear boxes had been replaced with straight through pipes that droned. When the centre boxes were taken out, the old VXR8 rear boxes were installed.
Thanks Araf,

I'm quite keen on the cut-outs idea. My Mrs (and I suspect some of the neighbours too) doesn't like the sound of the Walkinshaw I've on there now.

Mind you, a guy came up beside me in a traffic queue this evening opened his window and gave me thumbs up :-)


Seen these on eBay: vacumn operated: http://www.ebay.co.uk/itm/281579374554?_trksid=p20...

or electric; http://www.ebay.co.uk/itm/281476519423?_trksid=p20...

Which did you use?

Cheers, Steve


Edited by SteveMJ on Thursday 12th February 22:45

ARAF

20,759 posts

247 months

Thursday 12th February 2015
quotequote all
I use the electric ones, but they are cheaper on Ali Express.

http://www.aliexpress.com/item/kylin-2-2-25-2-5-3-...

You can link both motors to one controller box, but it struggles, so I have them on independent switches and controllers.

What you can't see clearly in the pictures, is that the controller boxes have a male connector, as do the motors - but the extension lead is male to female. I got around this by removing the short leads on the motors, cutting the male end off the extension leads, and soldering the extension leads to the motors (and then covering them in silicone sealant to keep the weather out). A bit of a pain, but when a pair costs about £150, or about a third of the cost of the Badlandz ones we had on the VXR8, then you can live with the hassle.

My controller boxes are in the rear quarter of the pickup bed, but you could have them somewhere in the boot.

granjuiceymoose

309 posts

184 months

Friday 13th February 2015
quotequote all
I'm guessing being universal I could make these fit my Monaro with a Wortec catback ?

ARAF

20,759 posts

247 months

Friday 13th February 2015
quotequote all
granjuiceymoose said:
I'm guessing being universal I could make these fit my Monaro with a Wortec catback ?
Yes, find where you're going to splice into your pipe, order the cutouts in the right bore size, and have them welded in. smile

Wolfracer

Original Poster:

2,074 posts

230 months

Friday 13th February 2015
quotequote all
Okay, so daft question but what size is the vxr8 exhaust?