Walkinshaw / Monkfish VCM OTR

[Tattooboy]

Can I ask a favour please of anyone with above fitted along with the infill panels.

I need to know how wide each piece is in CM's.

I'm looking at tidying up under the bonnet and now I've had the engine cover dipped, the W427 OTR with no infill panel looks a bit.........well..........crap!

The needing to know the width is due to the new carbon pattern I've had the cover done in only comes in a 50cm wide roll, just trying to gauge if the VCM will cover or not.

Many thanks

Ian

[Granby]

Do you mean these panels that are carbon dipped on mine

[Tattooboy]

Granby said:

Do you mean these panels that are carbon dipped on mine

Yes mate, and the actual OTR

[Granby]

Tattooboy said:

Granby said:

Do you mean these panels that are carbon dipped on mine

Yes mate, and the actual OTR

In that case they are both 43cm wide

[Tattooboy]

Granby said:

Tattooboy said:

Granby said:

Do you mean these panels that are carbon dipped on mine

Yes mate, and the actual OTR

In that case they are both 43cm wide

So all 3 bits are 43cm wide? Great news

[Granby]

Tattooboy said:

So all 3 bits are 43cm wide? Great news

Thought you meant just the 2 outer parts which are 43cm, the actual OTR is 60cm

[Tattooboy]

Granby said:

Tattooboy said:

So all 3 bits are 43cm wide? Great news

Thought you meant just the 2 outer parts which are 43cm, the actual OTR is 60cm

Yeah' just had that confirmed by Goldie.

Will see what the coaters says.

Cheers Granby

[ARAF]

Tattooboy said:

Granby said:

Tattooboy said:

So all 3 bits are 43cm wide? Great news

Thought you meant just the 2 outer parts which are 43cm, the actual OTR is 60cm

Yeah' just had that confirmed by Goldie.

Will see what the coaters says.

Cheers Granby

I think it's wider than it is deep though, so you might get away with using the sheet the other way?

[Tattooboy]

ARAF said:

Tattooboy said:

Granby said:

Tattooboy said:

So all 3 bits are 43cm wide? Great news

Thought you meant just the 2 outer parts which are 43cm, the actual OTR is 60cm

Yeah' just had that confirmed by Goldie.

Will see what the coaters says.

Cheers Granby

I think it's wider than it is deep though, so you might get away with using the sheet the other way?

Ithe weave won't match the engine cover as the sheet was laid from the front to back on that

He got away with it on the engine cover as he could lay it in 3 parts and lose the joint in grooves either side.

Might have to come up with a plan, maybe do the side panels in the same stuff but do something different with the OTR, or do all 3 bits in a different carbon weave but as close as possible to the stuff on the cover ???

[Tattooboy]

Oh well, ordered today and sent straight to Pro Coatings for Richard to work his magic

Should tidy the engine bay up a bit.

[goldvxr8]

Tattooboy said:

Oh well, ordered today and sent straight to Pro Coatings for Richard to work his magic

Should tidy the engine bay up a bit.

Cool 😎