efi live - injector duty cycle

[stigmundfreud]

Is this only calculated or is there a PID for it?

that is al

ta

[ringram]

its calculated... from injector pulse width which is the pid you need to select to make the calculation valid. If you right click the duty cycle calc pid and see 'more info' it will tell you what you must select to make it valid.

[stigmundfreud]

cheers rich

in the end I gave up.

My mistake was (after a system reinstall) not connecting up first then selecting the pids so half were not available to me - corrected now.

Another thing, I changed the duty cycle read outs to be the O2 voltages (nice to monitor on the screen)... imagine my surprise when the left counter read 0.000 all the time - issue was with the guage being set to start at 1 :s

sorted now. I've posted this on the forum http://forum.efilive.com/showthread.php?t=5622 any chance of a quick look if/when you get a chance?

Still getting the OL staying on for quite some time, joecar mentioned this last time he looked - any ideas why OL might stay on for a minute or so when my understanding (as limited as it is) it should revert to CL quickly?