phone car kit cable

[Black VXR]

Hi There, 56 plate VXR - Still trying to find out where the connectors/cable for the phone car kit is in the car, can anyone send me a description of how I find it please? Also if anyone knows which connections to use for a Parrot 3100 kit, I would appreciate any guidance on fitting and wiring and also microphone placement. Thanks.

[L2VXR]

this link may be of help although LHD gto

http://kb.ls1gto.com/KB/article.aspx?

Paul.

[jimb0]

L2VXR said:

this link may be of help although LHD gto

http://kb.ls1gto.com/KB/article.aspx?

Paul.

Yes that shows the mirror image of the location of the plug on our cars. It's taped to the main loom. The wiring code is the same a the one I used from www.ls1.com.au/forum/showthread.ph

[bennno]

Black VXR said:

Hi There, 56 plate VXR - Still trying to find out where the connectors/cable for the phone car kit is in the car, can anyone send me a description of how I find it please? Also if anyone knows which connections to use for a Parrot 3100 kit, I would appreciate any guidance on fitting and wiring and also microphone placement. Thanks.

I live in West Berks and have the handbook / installation guide for the factory kit if you want a copy them IM Me.

All the radio connectors etc are on the passenger side of the lower dash, remove the bit round the gearbox and you will find the connectors

My factory kit took the guy 10 minutes to install, cost £180 and works brilliantly

Bennno

[tim2100]

bennno said:

Black VXR said:

Hi There, 56 plate VXR - Still trying to find out where the connectors/cable for the phone car kit is in the car, can anyone send me a description of how I find it please? Also if anyone knows which connections to use for a Parrot 3100 kit, I would appreciate any guidance on fitting and wiring and also microphone placement. Thanks.

I live in West Berks and have the handbook / installation guide for the factory kit if you want a copy them IM Me.

All the radio connectors etc are on the passenger side of the lower dash, remove the bit round the gearbox and you will find the connectors

My factory kit took the guy 10 minutes to install, cost £180 and works brilliantly

Bennno

Benno Is the installation guide a soft copy? if so could you also send me it? I am about to install a kit in my Fathers Monaro, just in the process of ordering the connector for the kit from Holden in Austrailia.

I've tried to email you through your profile but says that you don't accept emails.

Tim.

[Black VXR]

Yes please - I am in Berks as well and can pop over and collect a copy if thats OK? Thanks

[Black VXR]

P.S. - I do accept emails

[bennno]

I dont know why it says i dont accept mails.

I will look installation handbook out and see if I can copy it at work

alternatively I can reccomend a good installer who did kits in both my cars

bennno