Alternative Wheel Info needed

[S600VXR]

Whats the standard offsets for the VXR wheels and do people agree that an offset of 40 and 45 (F/R) for 19" 8.5 and 9.5 wide alloys will just work with rolled arches...? Asking as found what I want but since they have not heard of a Monaro they need me to advise the offsets. also can someone confirm the centre bore size and PCD.

[Greens Vauxhall]

I think the PCD and offset details are in FAQ at the top of the page(not in HSV org or would have looked).

[BO55 VXR]

FAQ

Edited by BO55 VXR on Friday 31st August 11:00

[Doleboy]

S600VXR said:

Whats the standard offsets for the VXR wheels and do people agree that an offset of 40 and 45 (F/R) for 19" 8.5 and 9.5 wide alloys will just work with rolled arches...? Asking as found what I want but since they have not heard of a Monaro they need me to advise the offsets. also can someone confirm the centre bore size and PCD.

What wheels have you found & where did you get the rear arches rolled?

[willisit]

Same question here

[S600VXR]

These ones. They do them for the E46 so they will machine them to fit the offsets I specify.


http://www.g-power.de/769.html?&L=1

[S600VXR]

And for those worried about rolling... and size checking...

http://www.1010tires.com/WheelOffsetCalculator.asp

http://archenemy.co.uk/terms.htm

[S600VXR]

Just volenteered mine for this work so will post photo's some time later this month of the B4 and after shots...

[Doleboy]

Be interested in the before and after shots. Top marks to Arch Enemy for their company name.

How much will the wheels set you back?

[009]

car/wheel Details;
5x120 PCD ( same as BMW )
CTR Bore 59.4mm ( 1mm smaller than BMW )

Lowest offset you can run on a Monaro in 19" is;
8.5x19= ET34
9.5x19= ET36

You will need to roll the arches though!

FYR highest is aprox;
8.5x19 = ET 42
9.5x19= ET 46


hope this helps