Some pics of next mod :)

[ringram]

Almost there... final assembly required and careful cam selection..



GM Performance Products LS7 CNC heads for airflow



Darton sleeves for plenty of meat for overbore and strength



Nice solid main bearing caps to hold the 4.1" callies crank..

Then a chat with Roger to schedule things for install. Including new Difilippo 1-7/8 dual 3" exahust

[monkfish1]

Ready and waiting

[jamiep]

Look forward to hearing the results, good luck with it.

[MadMaxHSV]

Not going to do the exhaust yourself The headers are fun!

[Well_Fans]

headers are easy with engine out the car - fit them before dropping the engine in

[ringram]

Exactly. The difilippo VE exhaust have a runner do a loop at down by the collector to keep the lengths the same. This "loop" is too big to fit past the steering column, therefore either engine or steering will need to come away... I wasnt game in the weekends rain, so figured as mentioned it can be done when the engine is out

[MadMaxHSV]

ringram said:

Exactly. The difilippo VE exhaust have a runner do a loop at down by the collector to keep the lengths the same. This "loop" is too big to fit past the steering column, therefore either engine or steering will need to come away... I wasnt game in the weekends rain, so figured as mentioned it can be done when the engine is out

Yes you'd have to drop the rack, it does something similar and loops around the column on the Monaro.
Much fun

[Harryoz]

Good luck mate

[ringram]

Thanks mate.

I hope your luck is improving as well