Electric Cutouts anyone used them

[wallsjay]

Has anyone on here used these?

http://cgi.ebay.com/QTP-Dual-2-5-Elec

if so where did u fit them i was thinking right after the cats

anyone with any eperiance or comments good or bad


Cheers in advance

[Magic919]

Should make the floor pan vibrate a treat. Not sure I'd like that.

[ringram]

I think Wortec "might" use them for their switchable exhaust. The QTP valves that is anyway.

[wallsjay]

where are they fitted on the wprtec system any one have a photo of them ?

[ringram]

Not sure, I saw them on one model right at the back muffler, kind of just allowed a bypass pipe to open. Im sure Mr Wortec will tell all or maybe an owner can snap a piccy.

[peerke59]

Hi you HSV guy's from the U.K. I'm a Pontiac GTO 2006 owner from the Netherlands.
I have a cut-out build in from Badlanzhpe (www.badlanzbhp.com) behind the first
muffers. Perfect sound, and very good quality (inox) and fit. but watch the police !!
As far the vibrations: my girlfriend likes it ( just joking). After aprox 10.000 km
stil no problems.

Greetings from the Netherlands,

Peter.

p.s. I don't know how to put some pictures on this message, but I have some nice ones
from the cut-outs.
_______________________________________________________________________________________

[ringram]

You can host your pics at http://www.picoodle.com/
Then on the post screen click on the "Formatting Help" under the Icon pics it tells you how to format your pic for the forum

[Magic919]

[wolfracer]

saw a similar set up years ago on a golf (!) iirc, they T'd off after the cats and had a micro switch on the accelerator, so at full throttle, the gates opened and blam!!!

£600 odd quid fitted in uk, £200 quid + delivery + inport duties/tax + waiting + fitting and probably modding said parts/existing exhaust.
Not a lot in it in the end i would say?